د LMBGM A9 UHF بې سیم د غوږ دننه مانیټر پرو سیسټم لارښوونې لارښود

1. پیژندنه

The LMBGM A9 UHF Wireless In-Ear Monitor Pro System is designed to provide clear, reliable audio monitoring for studio, band rehearsal, and live performance environments. This system utilizes UHF technology for stable signal transmission and features a compact transmitter and beltpack receiver for professional use. This manual provides detailed instructions for setup, operation, and maintenance of your A9 system.

انځور 1.1: اوورview of the LMBGM A9 Wireless In-Ear Monitor System, showing the transmitter, multiple beltpack receivers, and in-ear headphones.

2. د بسته محتويات

مهرباني وکړئ تصدیق کړئ چې لاندې ټول توکي ستاسو په کڅوړه کې شامل دي:

• ۱ x XLR ټرانسمیټر
• 1 x Beltpack Receiver (quantity may vary by model, e.g., A9-1 includes one, A9-3 includes three)
• In-Ear Headphones (Ear Cushions included)
• 1 x 6.35mm اډاپټر
• 1 x Charging Cable (USB-A to USB-C, may include multiple USB-C connectors for simultaneous charging)
• 1 x د لارښوونې لارښود

3. محصول ختم شوview

3.1. لیږدونکی

The transmitter unit connects to your audio source and broadcasts the signal wirelessly to the receivers. It features an XLR input for balanced audio signals and a 6.35mm TS input for unbalanced signals. The unit includes controls for channel selection and power.

Image 3.1: The LMBGM A9 Transmitter, illustrating its compatibility with dynamic wired microphones, +48V condenser microphones, and musical instruments.

3.2. Beltpack Receiver

The beltpack receiver is a compact, portable unit that receives the audio signal from the transmitter. It features a 3.5mm headphone jack for connecting in-ear monitors, a volume control knob, and a display showing channel and signal status. The receiver provides real-time audio feedback and has a reception range of up to 30 meters.

Image 3.2: The LMBGM A9 Beltpack Receiver, highlighting its features such as real-time feedback, 30-meter reception, and earphone monitoring capability.

3.3. کلیدي ځانګړتیاوې

• د UHF بېسیم لیږد: Ensures stable signal and anti-interference performance.
• د لوړ وفادار غږ: Supports 24-bit/96KHz resolution with a wide frequency response (20Hz-20kHz ±0.5dB).
• ډیر ټیټ ځنډ: Transmission latency less than 5ms for real-time monitoring.
• د بیټرۍ اوږد ژوند: 5-7 hours of operation on a full charge, with approximately 3 hours for a full recharge.
• دوامدار ساختمان: فلزي جasing protects against impacts during use.
• Comfortable Earphones: Included ear rests and headphones are designed for extended wear.

۴. د تنظیم لارښوونې

۲.۱. د واحدونو چارج کول

Before initial use, fully charge both the transmitter and receiver units. Use the provided charging cable to connect the units to a USB power source. A full charge typically takes about 3 hours and provides 5-7 hours of operating time.

Image 4.1: The rechargeable design of the LMBGM A9 units, showing the USB-C charging ports.

4.2. د لیږدونکي سره نښلول

1. Connect the transmitter to your audio source (e.g., mixing console, audio interface) using an XLR cable or the provided 6.35mm adapter.
2. Ensure the audio source output level is appropriate to avoid distortion. The system has a built-in limiter circuit to manage high input levels.

4.3. Connecting the Receiver and Earphones

1. Plug the in-ear headphones into the 3.5mm jack on the beltpack receiver.
2. Adjust the ear rests for a comfortable and secure fit.

5. عملیاتي لارښوونې

5.1. بریښنا فعال/بند

Press and hold the 'POWER' button on both the transmitter and receiver units for a few seconds to turn them on or off. The display will illuminate when the units are powered on.

5.2. د چینل انتخاب

On the transmitter, press the 'CH' button to cycle through available UHF channels. Ensure that the receiver is set to the same channel as the transmitter for proper signal reception. The display on both units will show the selected channel.

5.3. د حجم کنټرول

Use the volume knob on the beltpack receiver to adjust the monitoring volume to a comfortable level. Start with a low volume and gradually increase it to prevent sudden loud sounds.

5.4. Channel Lock/Unlock

To prevent accidental channel changes during performance, you can lock the channel settings.

Image 5.1: Instructions for ID Lock and ID Unlock functionality on the LMBGM A9 system.

• ID Lock: Press and hold the power buttons on both the receiver and transmitter simultaneously for 6 seconds. The display will indicate successful locking.
• ID Unlock: Press and hold the power button on the receiver alone for 6 seconds. The display will indicate successful unlocking.

پاملرنه: The system can operate on two channels simultaneously, but this may impact signal stability. The maximum signal distance is reduced to 20 meters when operating on two channels.

6. ساتنه

Proper maintenance ensures the longevity and optimal performance of your LMBGM A9 system.

• پاکول: Use a soft, dry cloth to clean the units. Avoid using abrasive cleaners or solvents.
• ذخیره کول: سیسټم په یخ او وچ ځای کې د مستقیم لمر وړانګو او سختې تودوخې څخه لرې وساتئ.
• د بیټرۍ پاملرنه: For long-term storage, charge the batteries to approximately 50% every few months to maintain battery health.
• د کیبل مدیریت: د زیان د مخنیوي لپاره په کیبلونو کې د تیزو کږو یا کنکونو څخه ډډه وکړئ.

7. ستونزه حل کول

If you encounter issues with your LMBGM A9 system, refer to the following common problems and solutions:

8. مشخصات

9. تضمین او ملاتړ

LMBGM products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official LMBGM webسایټ. مهرباني وکړئ د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.