1. پیژندنه
This instruction manual provides essential information for the safe and efficient operation of your VEVOR 2.2 kW Variable Frequency Drive (VFD). This VFD is designed to convert single-phase AC 220-240V input into three-phase AC 220-240V output, enabling precise speed control for various industrial motors. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage or injury.
انځور: یو جنرال view of the VEVOR 2.2 kW Variable Frequency Drive (VFD), showcasinد هغې کمپیکټ ډیزاین او کنټرول پینل.
2. د خوندیتوب لارښوونې
خبرداری: Improper installation or operation can lead to serious injury or property damage. Always follow these safety guidelines.
- Ensure power is disconnected before any wiring or maintenance.
- The VFD must be properly grounded to prevent electrical shock.
- Do not connect U/V/W output directly to AC power supply; this will damage the inverter.
- Install the inverter in a non-flammable, dry environment, free from explosive gases.
- Only qualified professionals should perform wiring and installation.
- Do not open the VFD casing; internal components are under high pressure and can cause injury.
- The VFD features a 10-layer protection system, including overcurrent, overload, overvoltage, phase loss, and short circuit protection. However, these are supplementary and do not replace safe operating practices.
Image: Diagram illustrating the VEVOR VFD's comprehensive safety protections, including overcurrent, overload, overvoltage, short circuit, and phase loss protection.
3. محصول ختم شوview
The VEVOR 2.2 kW VFD is a robust and efficient solution for controlling the speed of three-phase motors. It offers stable performance, energy efficiency, and a user-friendly interface.
کلیدي ځانګړتیاوې:
- د بریښنا تولید: 2.2 kW (3 HP), 10 A.
- داخلول: Single-phase AC 220-240 V, 50/60 Hz.
- محصول: Three-phase AC 220-240 V, 0-400 Hz.
- کنټرول: Soft start and stop for smooth motor operation.
- ساتنه: 10-layer system including overcurrent, overload, overvoltage, phase loss, and short circuit protection.
- یخ کول: Powerful fan and multi-hole design for efficient heat dissipation and quiet operation.
- د کارن انٹرفیس: Intuitive control panel with a 5-digit LED display, speed adjustment knob, and removable panel for remote operation (20 cm cable).
- پایښت: High-quality circuit control board and high-temperature resistant plastic casing.
انځور: تفصیلي view of the VEVOR VFD highlighting its high-performance features, including support for remote operation, a large cooling fan for rapid heat dissipation, a high-quality circuit control board, and a high-temperature resistant plastic casing.
4. ترتیب او نصب کول
4.1 د تارونو ډیاګرام
Refer to the following diagram for correct wiring. Ensure all connections are secure and comply with local electrical codes.
Image: Wiring diagram showing single-phase AC 220-240V input connected to terminals L and N, and three-phase AC 220-240V output connected to motor terminals U, V, W. Grounding terminal (GND) is also indicated.
4.2 ترمینل پیوستون
| ټرمینل لیبل | د فعالیت تفصیل |
|---|---|
| ل، ن | د واحد پړاو AC 220V ان پټ ټرمینل |
| یو، وی، وی | د وتلو ټرمینل د درې پړاوه موټرو سره وصل کړئ |
| GND | ځمکنۍ ترمینل |
مهم: Ensure the motor's wiring configuration is set for 220V three-phase operation if it is a dual-voltage motor (e.g., 220V/380V).
5. عملیاتي لارښوونې
5.1 د کنټرول پینلview
The VFD features an intuitive control panel for easy operation and parameter adjustment.
انځور: تفصیلي view of the VEVOR VFD control panel, showing the 5-digit LED display, status indicators, speed adjustment knob, and function keys (DISP, FWD/REV, PROG, FUNC/DATA, RUN, STOP/RESET).
- د وضعیت شاخص: Displays current operating status (Power, Run, Stop, FWD, REV, r/min).
- پنځه عددي LED ښودنې سکرین: Shows frequency, speed, and parameter values.
- د سرعت تنظیم کولو غوټۍ: Used to adjust the output frequency/motor speed.
- د چلولو تڼۍ: د انورټر محصول پیل کوي.
- د ودرولو/بیا تنظیمولو تڼۍ: د انورټر محصول بندوي یا د خطا شرایط بیا تنظیموي.
- د FWD/REV کیلي: Toggles between forward and reverse rotation.
- د DISP تڼۍ: Shifts between programming modes or jog mode in normal operation.
- د پروګ تڼۍ: Used for selecting programming mode or programming.
- FUNC/DATA Button: Used for setting function data.
- پورته/ښکته تیرونه: For navigating menus and adjusting values.
5.2 بنسټیز عملیات
- پاور آن: Connect the VFD to the power supply. The LED display will light up.
- تعدد ټاکل: وګرځوئ د سرعت تنظیم کولو نوب to set the desired output frequency (0-400 Hz).
- د موټرو پیل: فشار ورکړئ چلول button to start the motor. The motor will accelerate to the set frequency.
- د لار بدلول: فشار ورکړئ FWD/REV د مخکینۍ او بیرته ګرځیدو ترمنځ د بدلولو لپاره کیلي.
- موټر ودروئ: فشار ورکړئ ودروئ/بیا تنظیم کړئ د موټرو د بندولو لپاره تڼۍ.
- د بیا تنظیم کولو نیمګړتیا: If a fault occurs, the VFD will display an error code. Press ودروئ/بیا تنظیم کړئ to clear the fault after addressing the issue.
5.3 د پیرامیټر ترتیبات
Detailed parameter settings are crucial for optimizing VFD performance for specific applications. Refer to the comprehensive user guide (if provided separately) for advanced parameter configurations. Basic parameters typically include:
- د اعظمي محصول فریکونسۍ
- د سرعت/کمښت وخت
- د موټرو تعدد
- د موټرو درجه بندي حجمtage
- د موټرو شرح شوی اوسنی
د کارولو پروګ او فنک/ډاټا buttons along with the Up/Down arrows to navigate and modify parameters.
6. ساتنه
منظم ساتنه ستاسو د VFD اوږد عمر او د باور وړ عملیات تضمینوي.
- پاکول: Keep the VFD clean and free from dust and debris. Use a soft, dry cloth. Do not use liquid cleaners.
- وینټیلیشن: Ensure the cooling fan and ventilation holes are unobstructed for proper heat dissipation.
- اړیکې: په دوره یي ډول د تارونو ټولې اړیکې د ټینګښت او د زنګ وهلو نښو لپاره وګورئ.
- چاپیریال: Maintain the operating environment within specified temperature and humidity ranges.
- معاینه: Inspect the VFD for any physical damage or unusual noises during operation.
7. ستونزه حل کول
If you encounter issues with your VFD, refer to the following common problems and solutions. For persistent issues, contact VEVOR customer support.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| VFD نه چالانېږي | No power supply; loose connections; internal fault | Check power input; verify wiring; contact support |
| موټر نه پیل کیږي | Incorrect wiring; VFD in stop mode; fault condition; incorrect parameters | Verify motor and VFD wiring; press RUN; check for error codes and reset; review د پیرامیټر تنظیمات |
| Motor runs erratically or at wrong speed | Incorrect frequency setting; motor parameters mismatch; unstable power supply | Adjust speed knob; verify motor parameters (rated frequency, voltage); ensure stable input power |
| VFD د تېروتنې کوډ ښکاره کوي | زیاتی، زیاتیtage, overload, phase loss, etc. | Refer to the VFD's specific error code list (if available in full manual); address the underlying cause (e.g., reduce load, check wiring); press STOP/RESET to clear |
| ډیر ګرم کول | Blocked ventilation; excessive ambient temperature; continuous heavy load | Clear obstructions from fan/vents; ensure adequate airflow; reduce load or operating time; consider a VFD with higher capacity if consistently overloaded |
8. مشخصات
Detailed technical specifications for the VEVOR 2.2 kW Variable Frequency Drive.
Image: VEVOR VFD showing physical dimensions and key technical specifications such as model number, horsepower, power, current, input/output voltage, input/output frequency, operating temperature, and net weight.
| پیرامیټر | ارزښت |
|---|---|
| د ماډل شمیره | AT1-2200X |
| هارس پاور | 3 HP |
| ځواک | 2.2 kW |
| اوسنۍ | 10 A |
| ننوتۍ جلدtage | AC 220-240 V Single Phase |
| د محصول Voltage | AC 220-240 V Three Phase |
| د ننوتلو فریکونسی | 50 / 60 Hz |
| د تولید فریکونسی | 0-400 Hz |
| د عملیاتي حرارت درجه | ۰°C - ۶۰°C (۳۲°F - ۱۴۰°F) |
| خالص وزن | ۲۴.۷ کیلوګرامه (۶۱.۷ پونډه) ± ۳٪ |
| ابعاد (L x W x H) | 126 x 125 x 186 mm (4.9 x 5 x 7.3 انچه) |
| مواد | Aluminium (internal components), High-temperature resistant plastic (casing) |
| د ښودلو ډول | LED |
9. تضمین او ملاتړ
For warranty information, technical support, or service inquiries, please contact VEVOR customer service. Keep your purchase receipt and product model number handy when contacting support.
You can typically find support contact details on the official VEVOR webسایټ یا ستاسو د پیرود پلیټ فارم له لارې.