DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. د خوندیتوب معلومات

خبرداری: د دې وسیلې له چلولو دمخه تل د خوندیتوب ټول اخطارونه او لارښوونې ولولئ او پوه شئ. د اخطارونو او لارښوونو په تعقیب کې پاتې راتلل ممکن د بریښنا شاک، اور، او/یا جدي ټپي کیدو لامل شي.

• تل د خوندیتوب چشمې یا خوندیتوب شیشې د غاړې پوښونو سره واغوندئ او د اړتیا په صورت کې د دې محصول کار کولو پرمهال د مخ بشپړ پوښ ولرئ.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. محصول ختم شوview

د بسته محتويات

• بې سیمه براد نیلر
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• 2.0Ah لی آئن بیټرۍ
• 1-ساعت چټک چارجر
• د لیږد قضیه
• د لارښوونې لارښود

د وسیلې برخې

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

ابعاد او وزن

Figure 2: Physical dimensions and weight of the nailer (without battery).

• اوږدوالی: 10.83 انچه (27.5 سانتي متره)
• عرض: 9.45 انچه (24 سانتي متره)
• Weight: 6.19 lbs (without battery)

3. ترتیب کول

د بیټرۍ نصب کول

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. بیټرۍ د وسیلې د بیټرۍ سلاټ سره سم کړئ.
3. بیټرۍ په سلاټ کې وغورځوئ تر هغه چې په خوندي ډول ځای ته راشي.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. د خوشې کولو تڼۍ فشار ورکړئ او د مجلې پوښ وباسئ.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. د مجلې پوښ وتړئ تر هغه چې دا د خوشې کولو تڼۍ سره ښکیل شي.

نیل Viewکړکۍ

نوک viewer window allows you to quickly check the fastener level. When the window shows سور, it indicates the magazine is without nails. When it shows تور, it indicates the magazine contains nails.

4. عملیاتي لارښوونې

د ډزو طریقې

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

د واحد ډزو حالت

• Shift the mode switch to the کیڼ اړخ (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

د ډزو کولو حالت سره اړیکه ونیسئ

• Shift the mode switch to the ښي اړخ (contact firing icon).
• محرک کش کړئ.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

یادونه: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

ژوره سمون

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

د LED رڼا

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

د LED شاخص

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• سور آن: ټیټ بیټرۍ.
• سور چمکۍ: Nails/staples are jammed.
• زرغون No nails/staples in the magazine.
• زرغون فلشینګ: ډیر تودوخه.
• رڼا بنده: نورمال چلولو حالت.

د محصول رسمي ویډیو

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. ساتنه

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

د بیټرۍ پاملرنه

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• بیټرۍ په یخ او وچ ځای کې د مستقیم لمر وړانګو او خورا تودوخې څخه لرې وساتئ.

6. ستونزه حل کول

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. مشخصات

مطابقت لرونکي فاسټینرونه

Figure 9: Compatible nail and staple types.

8. تضمین او ملاتړ

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.