Generic Flipper Zero External Module User Manual

1. پیژندنه

This manual provides detailed instructions for the Generic External Module designed for the Flipper Zero. This module expands the capabilities of your Flipper Zero by integrating WiFi (ESP32S2), 433MHz RF, and GPS functionalities, along with a dedicated screen for enhanced interaction. Please read this manual thoroughly before use to ensure proper installation and operation.

2. محصول ختم شوview

The Generic External Module is a versatile development board that attaches to your Flipper Zero. It includes the following components:

• 433 MHz RF Module: For radio frequency communication.
• ESP32S2 WiFi Module: Enables WiFi connectivity and network testing.
• د GPS ماډل: Provides global positioning system capabilities.
• Integrated Screen: For displaying information and interacting with the module's functions.
• 800mAh بیټرۍ: Powers the external module.

The module also functions as a circuit test board, facilitating circuit design and experimentation.

Figure 2.1: Generic Flipper Zero External Module with screen and antennas attached to a Flipper Zero device.

Figure 2.2: Close-up of the external module attached to a Flipper Zero, showing the screen interface and GPIO pins.

۱. تنظیم او نصب کول

3.1 Attaching the Module to Flipper Zero

Align the GPIO pins of the external module with the corresponding pins on your Flipper Zero. Gently press the module into place until it is securely connected. Ensure a firm connection to prevent accidental dislodgement during operation.

Figure 3.1: The external module being attached to the Flipper Zero device.

3.2 Firmware Flashing for WiFi Module (Marauder)

To utilize the full capabilities of the WiFi module, it is recommended to flash the Marauder firmware. This can be done via a web browser or directly using the Flipper Zero.

Method 1: Flash via Web براوزر

1. خپل خلاص کړئ web براوزر او لاړ شئ fzeeflasher.com.
2. Connect the WiFi Devboard to your PC via a USB-C cable.
3. While holding the BOOT button on the Devboard, plug in the USB cable.
4. په website, click 'Connect' and select 'ESP32-S2'.
5. Select 'Flipper Dev Board' as the model, choose the 'Latest Version', and then select 'Marauder' for the firmware.
6. Click 'Program' and wait for the flashing process to complete.
7. Once 'FLASHING PROCESS COMPLETED' is displayed, disconnect the board.

Method 2: Flash Using Flipper Zero

1. Install the qFlipper APP on your PC.
2. Connect your Flipper Zero to your PC via USB-C.
3. Download the 5G WiFi deauth software package and extract it.
4. In qFlipper, navigate to 'SD Card' → 'apps'.
5. Drag the downloaded '5G WiFi deauth.fap' file into the 'Apps' folder.
6. On your Flipper Zero, go to 'Apps' → 'GPIO' → 'ESP32 Flasher' → 'Quick Flash'.
7. Select 'Flipper WiFi Devboard' and then 'Marauder'.
8. The LED on the module will blink, indicating successful firmware flashing.

3.3 CC1101 RF Module Setup

The CC1101 RF module requires specific settings on your Flipper Zero to function correctly.

1. Connect the CC1101 module to your Flipper Zero.
2. On your Flipper Zero, navigate to 'Sub-GHz' → 'Radio Settings' → 'Modules'.
3. Switch the module setting to 'External'.
4. You can now try to receive or send radio signals.

3.4 GPS Module Setup

The GPS module provides location tracking capabilities. Ensure the external GPS antenna is connected to the module for optimal performance.

4. عملیاتي لارښوونې

4.1 WiFi Module Operation (Marauder Firmware)

After flashing the Marauder firmware, you can use the WiFi module for network scanning and testing.

1. On your Flipper Zero, navigate to 'Apps' → '5G WiFi Death' → 'Scan WiFi'.
2. د پورته او ښکته تڼیو څخه کار واخلئ ترڅو view scanned WiFi networks.
3. Select a target WiFi network and press OK. The LED on the module will blink, indicating activity.
4. Observe the connected devices on the target WiFi network.

4.2 GPS Module Operation

The GPS module can be activated simultaneously with other functions without interference. It automatically switches between the Flipper Zero's power supply and its own internal power supply.

1. On your Flipper Zero, navigate to 'Apps' → 'GPIO' → 'GPS'.
2. The module will display GPS data such as Latitude, Longitude, Course, Speed, Altitude, and Satellite count.

5. مشخصات

6. ستونزه حل کول

• Module not detected: Ensure the module is firmly seated on the Flipper Zero's GPIO pins. Try unplugging and re-plugging the module.
• Firmware flashing issues: Verify that the correct drivers are installed on your PC and that the USB-C cable is functioning properly. Ensure the BOOT button is held down during connection if flashing via PC.
• WiFi scanning not working: Check that the WiFi module firmware (e.g., Marauder) is correctly installed and selected in the Flipper Zero's applications.
• جي پي ایس سیګنال نه ترلاسه کوي: Ensure the external GPS antenna is properly connected and that the device has a clear view د آسمان

7. ساتنه

To ensure the longevity and optimal performance of your external module:

• ماډل پاک او له دوړو او کثافاتو څخه پاک وساتئ. د پاکولو لپاره نرم، وچ ټوکر وکاروئ.
• د موډل د تودوخې یا رطوبت له څرګندولو څخه ډډه وکړئ.
• Handle the module and its components with care to prevent physical damage.
• Regularly check for firmware updates for both the Flipper Zero and the external module to benefit from new features and bug fixes.

8. تضمین او ملاتړ

د تضمین معلوماتو او تخنیکي ملاتړ لپاره، مهرباني وکړئ د خپل پیرود سره چمتو شوي اسنادو ته مراجعه وکړئ یا مستقیم له تولیدونکي سره اړیکه ونیسئ. د هر ډول تضمین ادعا لپاره د پیرود ثبوت وساتئ.