AIOMEST AI-9000F Hot-Wire Anemometer User Manual

پیژندنه

Thank you for choosing the AIOMEST AI-9000F Hot-Wire Anemometer. This device is designed for precise measurement of wind speed, air temperature, and air volume (CFM/CMM) in various industrial and HVAC applications. Its high-sensitivity hot-wire sensor and compact probe allow for accurate readings even in subtle air movements and confined spaces. Please read this manual thoroughly before operation to ensure proper use and to maximize the performance and lifespan of your instrument.

محصول پای ته ورسیدview

The AIOMEST AI-9000F is a professional-grade thermal anemometer featuring a high-sensitivity hot-wire wind sensor. It is equipped with a 3-inch backlit LCD for clear readings and a durable, retractable probe for accessing tight areas. The device supports multiple measurement modes and units, and includes a rechargeable battery for extended use.

Figure 1: AIOMEST AI-9000F Hot-Wire Anemometer in use, measuring airflow from a ceiling vent.

کلیدي ځانګړتیاوې:

• High-sensitivity Hot-Wire wind sensor for precise measurements.
• Measures wind speed, air temperature, and calculates air volume (CFM/CMM).
• Compact, retractable 10mm probe for access into tight spaces.
• Max/Min/Real-time measurement modes.
• Data hold function to freeze readings.
• Switchable wind speed units: m/s, km/h, ft/min, knots, MPH.
• Switchable air volume units: CFM, CMM.
• 3-inch backlit LCD for clear visibility.
• 1000mAh rechargeable lithium battery providing up to 10 hours of continuous operation.
• 7 responsive silicone buttons for user-friendly control.
• Built-in metal belt clip for portability.

د خوندیتوب معلومات

د وسیلې د ټپي کیدو او زیان څخه د مخنیوي لپاره تل لاندې خوندیتوب احتیاطي تدابیر په پام کې ونیسئ:

• د وسیلې د جلا کولو یا ترمیم کولو هڅه مه کوئ.
• وسیله د اوبو او لوړ رطوبت څخه لرې وساتئ.
• د اوږدې مودې لپاره د خورا تودوخې یا مستقیم لمر وړانګو ته د وسیلې له څرګندولو څخه ډډه وکړئ.
• Handle the probe with care to prevent damage to the sensitive hot-wire sensor.
• Use only the provided USB charging cable or a compatible charger.
• Store the device in a clean, dry environment when not in use.

چمتو کول

د بسته بندۍ او تفتیش کول:

Upon receiving your AIOMEST AI-9000F, carefully unpack all components. Verify that the following items are included:

• AIOMEST AI-9000F Hot-Wire Anemometer unit
• Retractable Hot-Wire Probe
• د USB چارج کیبل
• د کارونکي لارښود (دا لاسوند)

Inspect the device for any signs of damage. If any components are missing or damaged, contact customer support immediately.

Figure 2: Packing list for AIOMEST AI-9000F Thermal Anemometer.

د بیټرۍ چارج کول:

The AI-9000F is equipped with a built-in 1000mAh rechargeable lithium battery. Before first use, fully charge the device.

1. Connect the small end of the USB charging cable to the charging port on the anemometer.
2. د USB کیبل لویه پای د معیاري USB بریښنا اډاپټر (شامل نه دی) یا د کمپیوټر USB پورټ سره وصل کړئ.
3. The charging indicator on the device will show the charging status. Once fully charged, the indicator will change (refer to device display for specific indication).

بشپړ چارج تر ۱۲ ساعتونو پورې دوامداره عملیات چمتو کوي.

Figure 3: Charging the AIOMEST AI-9000F Anemometer.

Attaching the Probe:

Gently connect the probe cable to the designated port on the top of the main unit. Ensure a secure connection. The probe is retractable and bendable for flexible positioning.

Figure 4: AIOMEST AI-9000F with probe extended into ductwork.

عملیاتي لارښوونې

پاور آن/بند:

• د بریښنا لپاره ، فشار ورکړئ او ونیسئ پاور تڼۍ
• د بریښنا بندولو لپاره فشار ورکړئ پاور button again. The device features an auto-power-off function to conserve battery.

اساسي اندازه کول:

Once powered on, the device will automatically begin measuring wind speed and air temperature. Extend the probe into the airflow you wish to measure. Ensure the hot-wire sensor at the tip of the probe is fully exposed to the airflow.

Figure 5: Measuring airflow in an HVAC vent.

د واحدونو بدلول:

فشار ورکړئ UNIT button to cycle through available wind speed units (m/s, km/h, ft/min, knots, MPH) and air temperature units (°C, °F).

Measurement Modes (Max/Min/Real-time):

فشار ورکړئ MAX/MIN button to switch between different measurement modes:

• Real-time Mode: Displays current live readings.
• MAX حالت: Displays the maximum recorded value since the mode was activated or reset.
• MIN Mode: Displays the minimum recorded value since the mode was activated or reset.

د معلوماتو ساتل فعالیت:

فشار ورکړئ هوډ button to freeze the current readings on the display. Press it again to release the hold and resume live measurements.

Air Volume (CFM/CMM) Measurement

To measure air volume, you must first input the area of the duct or pipe you are measuring.

1. فشار ورکړئ موډ button until the display shows the air volume measurement screen (CFM or CMM).
2. فشار ورکړئ SET button to enter the area input mode.
3. Use the arrow buttons (often combined with MAX/MIN or UNIT buttons) to adjust the area value. Refer to the on-screen prompts for specific button functions during area input.
4. Once the correct area is set, press SET again to confirm and exit area input mode.
5. The device will now display the calculated air volume based on the measured wind speed and the entered area.

Ensure the area unit (e.g., ft² for CFM, m² for CMM) matches the selected air volume unit.

Figure 6: Air Volume Measurement details.

ساتنه

پاکول:

وسیله پاکه کړئ casing with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the hot-wire sensor clean and free from dust or debris. Use a soft brush or compressed air if necessary, but avoid touching the sensor directly.

ذخیره کول:

When not in use for extended periods, store the anemometer in a cool, dry place. Ensure the probe is retracted and protected. Charge the battery periodically to maintain its health.

د ستونزو حل کول

مشخصات

Figure 7: Wind Speed and Air Temperature Measurement Specifications.

تضمین او ملاتړ

Specific warranty details for the AIOMEST AI-9000F Hot-Wire Anemometer are not provided in this manual. For warranty information, technical support, or service inquiries, please refer to the product packaging or contact AIOMEST customer service directly through their official webسایټ یا پرچون پلورونکی چیرې چې محصول اخیستل شوی و.