AstroAI H2 Pro Cordless Tire Inflator User Manual

1. پیژندنه

Thank you for choosing the AstroAI H2 Pro Cordless Tire Inflator. This portable air compressor is designed for convenient and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. Featuring dual power supplies (DC 12V and built-in lithium battery), automatic shut-off, and an LED display, this device ensures reliable performance wherever you go. Please read this manual thoroughly before use to ensure proper operation and safety.

2. د خوندیتوب لارښوونې

• Always ensure the inflator is placed on a stable, flat surface during operation to prevent movement due to vibration.
• د کارولو پرمهال انفلاټر بې پامه مه پریږدئ.
• Allow the pump to cool for at least 10 minutes after 15 minutes of continuous use to prevent overheating.
• وسیله د ماشومانو او څارویو څخه لرې وساتئ.
• انفلاټر په لوند شرایطو کې یا د اور اخیستونکي مایعاتو یا ګازونو ته نږدې مه چلوئ.
• Ensure the correct pressure is set for the item being inflated to avoid over-inflation, which can cause damage or injury. Refer to the item's manufacturer recommendations for appropriate pressure levels.
• Disconnect the power source when not in use or before performing any maintenance.

3. د بسته محتويات

• AstroAI H2 Pro Cordless Tire Inflator
• DC 12V Power Cable
• Air Hose with Screw-on Connector
• Various Nozzle Adapters (for balls, bicycles, etc.)
• د کارن لارښود

4. محصول ختم شوview

The AstroAI H2 Pro is a compact and versatile tire inflator designed for ease of use and portability. It features a digital display, intuitive controls, and a built-in LED light for nighttime use.

Figure 1: AstroAI H2 Pro Cordless Tire Inflator, showcasinد هغې کمپیکټ ډیزاین او مدغم لاستی.

کلیدي ځانګړتیاوې:

• Dual Power Supplies: Operates via DC 12V car power outlet or built-in lithium battery for maximum flexibility.
• چټک انفلاسیون: Upgraded cylinder design for quicker inflation times.
• اتومات بندول: کله چې ټاکل شوي فشار ته ورسیږي په اتوماتيک ډول ودریږي.
• د LED ښودنه: Clear digital display shows real-time pressure and preset values.
• څو واحدونه: Supports PSI, BAR, KPA, and KG/CM².
• جوړ شوی LED څراغ: په ټیټ رڼا شرایطو کې د کارولو لپاره روښانتیا چمتو کوي.
• مدغم ذخیره: Convenient compartment for storing accessories.

Figure 2: Close-up of the AstroAI H2 Pro's LED display and control buttons for setting pressure and units.

5. ترتیب کول

Before first use, ensure the device is fully charged if using the battery power supply. Connect the DC 12V power cable to your vehicle's cigarette lighter socket or ensure the internal battery is charged.

Figure 3: Demonstrates connecting the AstroAI H2 Pro using either the DC 12V power cable or utilizing its internal battery.

Connecting the Air Hose:

1. Uncoil the air hose from its storage compartment.
2. Screw the air hose connector onto the valve stem of the item you wish to inflate. Ensure a tight seal to prevent air leakage.

6. عملیاتي لارښوونې

Step-by-Step Inflation:

1. پاور آن: Connect the power source (DC 12V or internal battery) and press the power button to illuminate the screen.
2. واحد وټاکئ: Press the 'M' button to cycle through the available pressure units (PSI, BAR, KPA, KG/CM²) until your desired unit is displayed.
3. فشار تنظیم کړئ: Use the '+' and '-' buttons to set the target pressure value. The screen will display both the preset value and the current pressure.
4. ټایر سره وصل کړئ: Securely attach the air hose to the tire valve stem.
5. د انفلاسیون پیل: Press the start button to begin inflation. The compressor will automatically shut off once the preset pressure is reached.
6. نښلول: Once inflation is complete, disconnect the air hose from the valve stem and store the hose and power cable in their designated compartments.

د LED څراغ کارول:

The built-in LED light can be activated by pressing the light button. It offers different modes, including a steady light for illumination and a strobe light for emergency signaling.

Figure 4: The AstroAI H2 Pro demonstrating its built-in LED light, useful for nighttime or low-light conditions.

څو اړخیز غوښتنلیکونه:

The AstroAI H2 Pro is suitable for a wide range of inflation needs:

• موټرې: Inflates a flat tire (0 PSI to 36 PSI) in approximately 4 minutes and 30 seconds.
• موټرسایکلونه: Ideal for maintaining optimal tire pressure.
• بایسکلونه: Includes adapters for various bicycle valve types.
• سپورتي توپونه: Easily inflates basketballs, footballs, and other inflatables with the appropriate nozzle.

Figure 5: The AstroAI H2 Pro shown inflating various items, including car tires, motorcycle tires, bicycle tires, and sports balls.

7. ساتنه

• پاکول: د انفلاسیون بهرنۍ برخه د اعلان سره پاک کړئamp ټوکر د سختو کیمیاوي موادو یا خړوبولو پاکونکو څخه کار مه اخلئ.
• ذخیره کول: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose and power cable are neatly stored in the integrated compartments.
• د بیټرۍ پاملرنه: If using the battery, charge it regularly, even if not in frequent use, to prolong its lifespan.
• د نلی معاینه: Periodically check the air hose for any signs of wear, cracks, or damage. Replace if necessary.

Figure 6: The AstroAI H2 Pro with its integrated storage compartment open, showing how accessories are neatly organized.

8. ستونزه حل کول

9. مشخصات

10. تضمین او ملاتړ

The AstroAI H2 Pro Cordless Tire Inflator comes with a د جوړونکي 2 کلن تضمین. For warranty claims, technical support, or any questions regarding your product, please contact AstroAI customer service. You can typically find contact information on the official AstroAI webسایټ یا ستاسو د پیرود پلیټ فارم له لارې.

مهرباني وکړئ د تضمین تصدیق لپاره د پیرود ثبوت وساتئ.