SIMREX specializes in recreational remote-controlled drones, quadcopters, and RC cars, providing accessible aerial and driving experiences for beginners.
SIMREX is a consumer electronics brand focused on remote-controlled hobby products, particularly known for its lineup of user-friendly drones and RC vehicles. The brand's aerial products range from mini drones for indoor use to GPS-equipped quadcopters with HD cameras, featuring flight assists like altitude hold, optical flow positioning, and headless mode to help novice pilots.
In addition to drones, SIMREX manufactures remote-controlled bumper cars and all-terrain trucks designed for family entertainment. SIMREX products are widely available through major online retailers, catering to enthusiasts seeking affordable entry-points into radio-controlled hobbies.
وروستي لارښودونه له manuals+ د دې برانډ لپاره جوړ شوی.
د دې برانډ لپاره د لارښودونو، راجسټریشن او ملاتړ په اړه عامې پوښتنې.
Turn on the drone and place it on a flat surface. Turn on the remote controller. Push the left throttle stick to the highest point and then pull it to the lowest point. You should hear a beep, and the LED lights on the drone will turn steady, indicating a successful connection.
After pairing, push both control sticks to the bottom-left or bottom-right corners (depending on the model, e.g., 5 o'clock and 7 o'clock positions) and hold for a few seconds. The drone lights will flash rapidly and then turn steady when calibration is complete.
For many models like the X500 or X11, scan the QR code in the manual or search for the specific SIMREX app (often named 'SIMREX GO' or similar) in the iOS App Store or Google Play Store. Connect your phone to the drone's Wi-Fi network (e.g., beginning with 'SIMREX-') to view د کیمرې فیډ.
Drifting often indicates that the gyroscope needs calibration or the trim settings need adjustment. Perform a level calibration first. If the drone still drifts, use the trim buttons on the controller to adjust the balance against the direction of the drift.
Remove the battery from the vehicle/drone. Connect it to the provided USB charging cable, and plug the cable into a USB power source (adapter or computer). A light on the charger usually turns on or off to indicate charging status. Do not overcharge or leave unattended.