د سونیکیک یوه فابریکه د اکوسټیک ګیتار پریamp and Digital Reverb Pedal

پیژندنه

The SONICAKE A Factory pedal is a powerful acoustic instrument preamp designed to enhance the sound of your acoustic guitar, violin, mandolin, and other acoustic instruments. It features a high impedance input and an XLR balanced output, ensuring optimal signal integrity. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your A Factory pedal.

شکل 1: مخکی view of the SONICAKE A Factory pedal, showing all controls and footswitches.

چمتو کول

Follow these steps to properly set up your SONICAKE A Factory pedal:

1. د بریښنا پیوستون: Connect a DC 9V power adapter (5.5×2.1mm, center negative, 60mA) to the DC 9V input jack on the pedal. Ensure the power adapter meets these specifications to prevent damage.


Figure 2: Diagram showing the DC 9V central negative power connection for the pedal.

2. د وسیلې داخلول: Connect your acoustic instrument to the "INPUT" jack on the pedal using a standard 1/4-inch instrument cable. The pedal features a high impedance input suitable for various acoustic pickups.
3. د محصول پیوستون:
   • د نښلولو لپاره amplifier or other pedals, use the 1/4-inch "OUTPUT" jack.
   • For connecting to an audio interface or mixer, use the XLR balanced "XLR OUT" jack. This provides a clean, balanced signal for recording or live sound applications.
4. د ځمکې پورته کول: The pedal includes a ground lift feature to eliminate ground noise. If you experience hum or buzzing, try engaging the ground lift switch located near the XLR output.

عملیاتي لارښوونې

The A Factory pedal offers a range of controls to shape your acoustic tone:

• کنټرولونه:

  کنټرول	فعالیت
  نه	Adjusts the gain of the Notch Filter. Use this to quickly eliminate whistling feedback.
  N.FREQ	Adjusts the frequency range of the Notch Filter. Fine-tune your tone or eliminate unwanted feedback.
  حجم	Controls the overall output volume of the pedal.
  سخت	Adjusts the high-frequency response of the 3-Band EQ.
  R.MIX	Controls the mix level of the digital reverb effect.
  R.DECAY	Controls the duration of the digital reverb effect.
  باس	Adjusts the low-frequency response of the 3-Band EQ.
  منځنی	Adjusts the mid-frequency response of the 3-Band EQ.

  

  3 شکل: تړل view of the Notch Filter controls (NOTCH and N.FREQ).

• د پښو سویچونه:

  • REVERB فوټ سویچ: Tap to switch the reverb effect on or off.
  • HOLD FOR MUTE: Press and hold the REVERB footswitch to activate the mute function. This is useful for silent tuning or changing instruments.
  

  Figure 4: Illustration of the REVERB footswitch and its "Hold for Mute" function.

  • PREAMP د پښو سویچ: Activates or deactivates the preamp section of the pedal.

• بفر بای پاس:

  The A Factory pedal features a special design buffer bypass circuit. This ensures that your instrument's pristine sound is maintained even when the pedal is disengaged, preventing signal degradation over long cable runs or through multiple pedals.

  

  Figure 5: Visual representation highlighting the buffer bypass feature.

د محصول د ښودلو ویډیو:

Video 1: A demonstration of the SONICAKE A Factory pedal's sound and features with an acoustic guitar.

ساتنه

To ensure the longevity and optimal performance of your A Factory pedal, follow these maintenance guidelines:

• پاکول: Use a soft, dry cloth to clean the pedal's surface. Avoid using abrasive cleaners or solvents, as they may damage the finish or internal components.
• ذخیره کول: پیډل په یخ او وچ ځای کې د مستقیم لمر وړانګو، سختې تودوخې او لوړې رطوبت څخه لرې وساتئ.
• سمبالول: Handle the pedal with care. Avoid dropping it or subjecting it to strong impacts, as this can damage the internal circuitry or the aluminum-alloy casing.


Figure 6: The robust aluminium-alloy casing of the pedal, designed for durability.

د ستونزو حل کول

If you encounter any issues with your A Factory pedal, refer to the following common troubleshooting tips:

• غږ نشته:
  • د کیبل ټولې اړیکې (ان پټ، آوټ پټ، بریښنا) وګورئ.
  • Ensure the power adapter is correctly connected and providing the specified DC 9V, center negative power.
  • تایید کړئ چې ستاسو وسیله او ampلایفیر په سمه توګه کار کوي.
  • Check if the MUTE function is accidentally engaged (hold the REVERB footswitch to disengage).
• Hum or Buzzing Noise:
  • Engage the ground lift switch near the XLR output.
  • د بریښنا بل سوري یا بریښنا رسولو هڅه وکړئ.
  • ډاډ ترلاسه کړئ چې ټول کیبلونه په ښه حالت کې دي او په سمه توګه ساتل شوي دي.
• اغېز نه ښکېلول:
  • Ensure the respective footswitch (REVERB or PREAMP) is pressed firmly.
  • Check the control knobs for the effect (R.MIX, R.DECAY) to ensure they are not set to zero.

که ستونزه دوام ومومي، مهرباني وکړئ د نورو مرستو لپاره د SONICAKE پیرودونکي ملاتړ سره اړیکه ونیسئ.

مشخصات

تضمین او ملاتړ

For warranty information, technical support, or any other inquiries, please refer to the official SONICAKE webسایټ ته لاړ شئ یا خپل مجاز پلورونکي سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.

This product includes a user manual in the package. Please refer to it for additional details and specific instructions.