1. پیژندنه
This manual provides detailed instructions for the installation, operation, and maintenance of your DeepCool SC790 2-in-1 PWM & ARGB Hub and DeepCool SC700 12-Port Addressable RGB Hub. These devices are designed to expand your PC's fan and lighting control capabilities, allowing for synchronized effects and efficient cooling management.
The DeepCool SC790 is a versatile 2-in-1 hub that combines PWM fan control and Addressable RGB (ARGB) lighting synchronization. It allows you to connect up to six PWM fans and six 3-pin 5V ARGB devices to your motherboard, powered by a SATA connection.
The DeepCool SC700 is a dedicated 12-port Addressable RGB hub, designed to expand your system's ARGB lighting capabilities. It connects to a single 3-pin 5V ARGB header on your motherboard or controller and provides power via SATA to support up to twelve ARGB devices.
Figure 1: DeepCool SC790 2-in-1 PWM & ARGB Hub
Figure 2: DeepCool SC700 12-Port Addressable RGB Hub
۱.۱. د خوندیتوب مهم معلومات
- Ensure your PC is powered off and unplugged from the wall outlet before installation.
- Always handle electronic components with care to prevent electrostatic discharge (ESD) damage.
- This product is designed for 5V 3-pin Addressable RGB (ARGB) devices. It is NOT compatible with 12V 4-pin RGB devices. Connecting 12V RGB devices to this hub may cause damage to the hub, your RGB devices, or your motherboard.
- ډاډ ترلاسه کړئ چې ستاسو په سیسټم کې بریښنا کولو دمخه ټولې اړیکې خوندي دي.
3. د بسته محتويات
په کڅوړه کې عموما شامل دي:
- DeepCool SC790 2-in-1 PWM & ARGB Hub (or SC700 12-Port Addressable RGB Hub)
- Connection cables (SATA power, ARGB sync cable, PWM sync cable for SC790)
- د کارونکي لارښود (دا لاسوند)
Figure 3: SC790 Product Packaging
Figure 4: SC700 Product Packaging
4. د نصب لارښود
4.1. فزیکي نصب کول
Both the SC790 and SC700 hubs feature magnetic absorption for easy installation within your PC chassis.
- یو ځای غوره کړئ: Select a flat, metallic surface inside your PC case, such as the back of the motherboard tray or a drive bay.
- د مرکز غره: Simply place the hub onto the chosen metallic surface. The magnets will secure it in place.
Figure 5: Magnetic Mounting for SC700 (similar for SC790)
4.2. SC790 Wiring Instructions (PWM & ARGB Hub)
The SC790 hub allows for centralized control of up to six PWM fans and six 3-pin 5V ARGB devices.
- Connect SATA Power: Connect the SATA power cable from your PC's power supply unit (PSU) to the "SATA POWER" port on the SC790 hub. This provides stable and continuous power to all connected devices.
- Connect to Motherboard ARGB Header: Connect the included 3-pin ARGB sync cable from the "MB ARGB" port on the SC790 hub to an available 3-pin 5V Addressable RGB header on your motherboard. This enables software control and synchronization of lighting effects.
- Connect to Motherboard PWM Header: Connect the included 4-pin PWM sync cable from the "MB PWM" port on the SC790 hub to an available 4-pin PWM fan header on your motherboard (e.g., CPU_FAN, SYS_FAN). This allows your motherboard to control the speed of connected fans.
- مینه وال وصل کړئ: Connect your 4-pin PWM fans to the "PWM" ports (1-6) on the SC790 hub.
- Connect ARGB Devices: Connect your 3-pin 5V ARGB devices (e.g., LED strips, ARGB fans) to the "ARGB" ports (1-6) on the SC790 hub.
Figure 6: SC790 Connection Diagram showing SATA power, motherboard ARGB/PWM, and device connections.
Figure 7: SC790 connected to a motherboard ARGB header (exampلی)
4.3. SC700 Wiring Instructions (Addressable RGB Hub)
The SC700 hub provides twelve 3-pin 5V ARGB ports for expanding your lighting setup.
- Connect SATA Power: Connect the SATA power cable from your PC's power supply unit (PSU) to the "SATA POWER" port on the SC700 hub. This ensures sufficient power for all connected ARGB devices.
- Connect to Motherboard ARGB Header: Connect the included 3-pin ARGB sync cable from the "MB ARGB" port on the SC700 hub to an available 3-pin 5V Addressable RGB header on your motherboard. This enables software control and synchronization of lighting effects.
- Connect ARGB Devices: Connect your 3-pin 5V ARGB devices (e.g., LED strips, ARGB fans) to the "ARGB" ports (1-12) on the SC700 hub.
Figure 8: SC700 Connection Diagram showing SATA power, motherboard ARGB, and device connections.
5. عملیات
Once installed and connected, the DeepCool SC790 and SC700 hubs operate by relaying control signals from your motherboard. There are no physical buttons or dedicated software for the hubs themselves; control is managed through your motherboard's software.
- Fan Speed Control (SC790 only): Use your motherboard's BIOS/UEFI settings or dedicated fan control software (e.g., ASUS Fan Xpert, Gigabyte SIV, MSI Dragon Center) to adjust the PWM fan speeds connected to the SC790 hub.
- د ARGB رڼا کنټرول: Utilize your motherboard's Addressable RGB software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync) to customize lighting effects, colors, and synchronization for all ARGB devices connected to either the SC790 or SC700 hub.
Figure 9: Compatible Motherboard ARGB Software Logos (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync)
6. ساتنه
The DeepCool SC790 and SC700 hubs require minimal maintenance.
- پاکول: Periodically, gently wipe the exterior of the hub with a dry, soft cloth to remove dust. Do not use liquid cleaners or solvents.
- د کیبل مدیریت: Ensure cables connected to the hub are neatly routed and not under excessive tension to prevent damage to the connectors or the hub itself.
7. ستونزه حل کول
- Q: ARGB lighting is not working or displaying incorrect colors.
- A:
- مطابقت چیک کړئ: Ensure all connected ARGB devices are 5V 3-pin Addressable RGB. This hub is NOT compatible with 12V 4-pin RGB devices.
- اړیکې چیک کړئ: Verify that the SATA power cable is securely connected to the hub and the PSU. Ensure the 3-pin ARGB sync cable is correctly connected to both the hub and a 3-pin 5V ARGB header on your motherboard.
- د مور بورډ سافټویر: Confirm that your motherboard's ARGB software is installed and configured correctly. Try restarting the software or your PC.
- د بریښنا رسول: Ensure your PSU provides sufficient power to all connected devices.
- Q: Fans connected to the SC790 are not spinning or not controllable.
- A:
- اړیکې چیک کړئ: Verify that the SATA power cable is securely connected to the hub and the PSU. Ensure the 4-pin PWM sync cable is correctly connected to both the hub and a 4-pin PWM fan header on your motherboard.
- د فین مطابقت: Ensure your fans are 4-pin PWM fans.
- Motherboard BIOS/Software: Check your motherboard's BIOS/UEFI settings or fan control software to ensure the fan header is enabled and configured for PWM control.
- Q: The hub is not detected by the system.
- A: The hub itself is a passive device that relays signals. It does not require driver installation and will not be "detected" as a separate device by your operating system. Its functionality is integrated through the motherboard's fan and ARGB headers.
8. مشخصات
8.1. DeepCool SC790 (2-in-1 PWM & ARGB Hub)
Figure 10: DeepCool SC790 Product Specifications
| پیرامیټر | ارزښت |
|---|---|
| اندازه | 102 × 60 × 17 mm |
| وزن | 69 ګرامه |
| د انٹرفیس ډول | ARGB-3Pin & PWM-4 Pin |
| فین پورټ | 6 Ports x 4Pin PWM |
| Fan Line Length | 24AWG 500 mm |
| درجه بندي Voltagد فین | 12V DC |
| Fan Safety Current | 2.0A (1 Port) / Total 4.5A (6 Ports) |
| Lamp د کنټرول بندر | 6 Ports x 3Pin Addressable RGB |
| د بریښنا رسونې درشل | د سیټا ځواک |
| ثابته طریقه | مقناطیسي |
| رنګ | تور |
8.2. DeepCool SC700 (12-Port Addressable RGB Hub)
Figure 11: DeepCool SC700 Product Specifications
| پیرامیټر | ارزښت |
|---|---|
| اندازه | 84 × 45 × 15 mm |
| خالص وزن | 38 ګرامه |
| د انٹرفیس ډول | ARGB-3Pin |
| Lamp د کنټرول بندر | 12 Ports x 3Pin Addressable RGB |
| د بریښنا رسونې درشل | د سیټا ځواک |
| رنګ | تور |
| Power Safety Current | 6A Max |
| ARGB Cable Length | 538 mm (Asus Asrock MSI) |
| درجه بندي Voltage of Lighting | 5V DC |
| Light Safety Current | 0.5A (1 Port) / Total 6A (12 Ports) |
9. د کارن لارښوونې
- Verify ARGB Header: Always double-check your motherboard manual to confirm the location and voltage of your Addressable RGB (ARGB) headers. They are typically 3-pin 5V.
- SATA Power is Crucial: Ensure the SATA power connector is firmly seated. Insufficient power can lead to dim lighting or non-functional fans.
- Magnetic Mounting Convenience: مشوره واخلئtage of the magnetic mounting feature for a clean and easy installation. You can reposition the hub as needed without adhesive residue.
- د کیبل مدیریت: Plan your cable routing before connecting everything to ensure a tidy build and optimal airflow.
10. تضمین او ملاتړ
For warranty information, technical support, or service inquiries, please refer to the official DeepCool webسایټ یا خپل پرچون پلورونکي سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
