د ماسټیک MS6300 څو اړخیز چاپیریال میټر کارونکي لارښود

1. پیژندنه

The Mastech MS6300 is a versatile digital environment multimeter designed to measure various environmental parameters. This device combines the functions of a Sound Level Meter, Luminometer, Relative Humidity Meter, Temperature Meter, Anemometer, and Air Flow Meter into a single, portable unit. It is suitable for a wide range of applications, including environmental monitoring, industrial hygiene, and HVAC system analysis.

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your MS6300 meter. Please read this manual thoroughly before use and keep it for future reference.

2. د خوندیتوب معلومات

د میټر د خوندي فعالیت او خدمت ډاډ ترلاسه کولو لپاره، دا لارښوونې تعقیب کړئ:

• Read all safety information and operating instructions before using the meter.
• Do not operate the meter if it appears damaged or if the protective casing له خطر سره مخ دی.
• Keep the meter away from water, dust, and extreme temperatures.
• Do not attempt to repair or modify the meter. Refer servicing to qualified personnel.
• که چیرې میټر د اوږدې مودې لپاره نه کارول کیږي نو بیټرۍ لرې کړئ ترڅو د لیکیدو مخه ونیسي.
• د ځایی مقرراتو سره سم بیټرۍ په سمه توګه تصفیه کړئ.

د بیټرۍ خوندیتوب

• This device uses one 9V 6F22 battery (not included).
• د بیټرۍ نصبولو پر مهال سم قطبي ډاډ ترلاسه کړئ.
• زاړه او نوي بیټرۍ، یا د بیټرۍ مختلف ډولونه مه ګډوئ.
• بیټرۍ ډیر تودوخې یا اور ته مه ښکاره کوئ.

3. محصول ختم شوview

The Mastech MS6300 is designed for ease of use with a clear LCD dual display and intuitive controls. Below are the key components and their functions:

• Windproof Ball: Covers the microphone for sound level measurements.
• د بریښنا سویچ: وسیله آن/بندوي.
• تڼۍ تنظیم کړئ: Used to select AVG/MAX/MIN/DIF (MAX-MIN) modes.
• د تودوخې او رطوبت سینسر: Measures ambient temperature and relative humidity.
• Illumination Button: Activates the light sensor.
• Backlight Button (BL): د ښودنې بیک لایټ بدلوي.
• Wind Speed and Air Volume Sensor: Measures air flow and wind speed.
• د LCD نندارې: Shows measurement readings and unit indicators.
• د واحد تڼۍ: Changes measurement units (e.g., °C/°F, m/s/knots, LUX/FC, dB(A)/dB(C), CMM/CFM).
• تڼۍ ونیسئ: په ښودنه کې اوسنی لوستل کنګل کوي.
• د موډ تڼۍ: Cycles through different measurement functions (Sound Level, Luminometer, Humidity/Temperature, Anemometer, Air Flow).
• ټریپډ ماونټ: Located at the bottom for stable placement.

4. ترتیب کول

4.1 د بیټرۍ نصب کول

1. د میټر په شا کې د بیټرۍ د برخې پوښ ومومئ.
2. د بیټرۍ کڅوړه خلاصولو لپاره سکرو ډرایور وکاروئ.
3. Insert one 9V 6F22 battery, ensuring the correct polarity (+/-).
4. د بیټرۍ کمپارټ پوښ بدل کړئ او د سکرو سره یې خوندي کړئ.

یادونه: بیټرۍ د محصول سره شاملې نه دي.

4.2 ابتدايي پاور آن

فشار ورکړئ پاور button to turn on the meter. The LCD display will illuminate, and the meter will perform a self-test before entering the default measurement mode.

5. عملیاتي لارښوونې

5.1 عمومي عملیات

• پاور آن/بند: فشار ورکړئ پاور تڼۍ
• شاته رڼا: فشار ورکړئ BL د ښودنې بیک لایټ فعال یا بندولو لپاره تڼۍ.
• د معلوماتو ساتل: فشار ورکړئ هوډ button to freeze the current reading. Press again to release.
• د موډل انتخاب: فشار ورکړئ موډ button to cycle through the different measurement functions: Sound Level, Luminometer, Humidity/Temperature, Anemometer (Wind Speed), and Air Flow.
• د واحد انتخاب: په هر حالت کې ، فشار ورکړئ UNIT button to change the measurement units.

5.2 Sound Level Measurement

1. Turn on the meter and select Sound Level mode using the موډ تڼۍ
2. فشار ورکړئ UNIT button to select between dB(A) or dB(C) weighting.
3. Position the microphone towards the sound source.
4. The sound level will be displayed on the LCD.
5. د کارولو SET button to cycle through AVG (Average), MAX (Maximum), MIN (Minimum), and DIF (Difference between MAX and MIN) values.

5.3 Luminance Measurement (Luminometer)

1. Turn on the meter and select Luminometer mode using the موډ تڼۍ
2. فشار ورکړئ UNIT button to select between LUX or FC (Foot-Candle) units.
3. Ensure the light sensor (located near the microphone) is exposed to the light source.
4. The illuminance value will be displayed.
5. د کارولو SET button for AVG/MAX/MIN/DIF values.

5.4 Humidity and Temperature Measurement

1. Turn on the meter and select Humidity/Temperature mode using the موډ تڼۍ
2. The relative humidity (%RH) and temperature will be displayed simultaneously.
3. فشار ورکړئ UNIT button to switch between Celsius (°C) and Fahrenheit (°F) for temperature.
4. د کارولو SET button for AVG/MAX/MIN/DIF values.

5.5 Anemometer (Wind Speed) Measurement

1. Turn on the meter and select Anemometer mode using the موډ تڼۍ
2. فشار ورکړئ UNIT button to select desired wind speed units (m/s, ft/min, knots, km/h, mph).
3. Position the wind speed sensor (fan) directly into the airflow.
4. The wind speed will be displayed.
5. د کارولو SET button for AVG/MAX/MIN/DIF values.

5.6 Air Flow Measurement

1. Turn on the meter and select Air Flow mode using the موډ تڼۍ
2. فشار ورکړئ UNIT button to select between CMM (Cubic Meters per Minute) or CFM (Cubic Feet per Minute).
3. Before measuring air flow, you must input the area of the duct or vent. The meter supports area range 0~999.9m² or 0~999.9ft². Refer to the full manual for detailed instructions on area input.
4. Position the wind speed sensor into the airflow.
5. The air flow rate will be displayed.
6. د کارولو SET button for AVG/MAX/MIN/DIF values.

6. ځانګړتیاوې

• Auto & Manual Ranging: The meter can automatically select the appropriate measurement range or allow manual selection for specific applications.
• د اتومات بریښنا بند (APO): To conserve battery life, the meter automatically turns off after a period of inactivity.
• AVG/MAX/MIN/DIF (MAX-MIN): Provides statistical analysis of measurements, showing average, maximum, minimum, and the difference between maximum and minimum readings.
• A / C Weighting Indication: For sound level measurements, allows selection between A-weighting (approximates human ear response) and C-weighting (flat response).
• د معلوماتو ساتل: د اسانه ثبتولو لپاره په ډسپلې کې اوسنی لوستل کنګل کوي.
• د شاته څراغ ښکاره کول: Illuminates the LCD for clear visibility in low-light conditions.
• د بیټرۍ ټیټ ښودنه: An indicator on the display warns when the battery level is low, prompting replacement.

7. مشخصات

The following table details the technical specifications of the Mastech MS6300 Multifunctional Environment Meter:

عمومي مشخصات:

• د بریښنا رسول: 1x 9V 6F22 Battery
• د محصول اندازه: 280mm x 89mm x 50mm / 11.0" x 3.5" x 2.0"
• د محصول وزن: 433g / 0.95lb
• تصدیقونه: CE، RoHS

8. ساتنه

• پاکول: میټر په وچ او نرم ټوکر سره پاک کړئ. د کثافاتو یا محلولونو څخه کار مه اخلئ.
• ذخیره کول: Store the meter in a cool, dry place. If storing for an extended period, remove the battery.
• د سینسر پاملرنه:
  • Keep the microphone (windproof ball) clean and free from debris.
  • ډاډ ترلاسه کړئ چې د رڼا سینسر خنډ نه دی.
  • Keep the wind speed/air volume sensor (fan) clear of any foreign objects to ensure accurate readings.
  • Avoid touching the temperature and humidity sensors directly.
• د بیټرۍ بدلول: کله چې د ټیټ بیټرۍ شاخص په ډسپلې کې څرګند شي نو د 9V بیټرۍ بدله کړئ.

9. ستونزه حل کول

• میټر نه چالانیږي:
  • Check if the battery is installed correctly with the right polarity.
  • Replace the 9V battery with a new one.
• ناسم لوستل:
  • ډاډ ترلاسه کړئ چې سینسرونه پاک او بې خنډه دي.
  • Verify the meter is in the correct measurement mode and units.
  • Allow the meter to stabilize in the environment before taking readings, especially for temperature and humidity.
  • For air flow, ensure the correct area has been input.
• ښودنه تیاره یا روښانه ده:
  • بیټرۍ بدله کړئ.
  • Check if the backlight is activated; deactivate if not needed to save power.

10. د کارن لارښوونې

• ثابتې اندازې: For best results, especially with wind speed and air flow, use the included tripod to keep the meter stable and ensure the sensor is directly facing the airflow.
• Environmental Acclimation: When moving the meter between environments with significant temperature or humidity differences, allow a few minutes for the sensors to acclimate to the new conditions before taking critical measurements.
• منظم پاکول: Periodically clean the wind speed sensor (fan) and light sensor to prevent dust and debris from affecting accuracy.

11. تضمین او ملاتړ

The Mastech MS6300 Multifunctional Environment Meter is designed and manufactured to high-quality standards and is CE and RoHS certified. For any technical support or warranty inquiries, please refer to the contact information provided by your retailer or the official MasTech webسایټ

مهرباني وکړئ د تضمین موخو لپاره د پیرود ثبوت په توګه خپل د پیرود رسید وساتئ.