1. پیژندنه
The BSIDE O2 is a versatile handheld device combining a dual-channel oscilloscope and a signal generator, designed for electrical engineers, hobbyists, and students. Featuring a 3.98-inch resistive touch screen, it offers intuitive operation and a compact design for portability. This manual provides detailed instructions for safe and effective use of your BSIDE O2 device.
2. د محصول ب Featuresې
- Dual-channel oscilloscope with 50MHz bandwidth.
- ریښتیني وخت sampling rate of 250MSa/s.
- Integrated signal generator with 7 adjustable waveform types.
- 3.98-inch TFT large-screen LCD display with 488*320px resolution.
- Resistive touch screen for easy navigation and parameter adjustment.
- Compact and portable design (170.0*80.9*23.9mm).
- Built-in 3000mAh lithium battery.
- 128kb record length.
- USB Type-C port for data transfer and charging.
- Certified with CE, RoHS, FCC standards.
3. د بسته محتويات
مهرباني وکړئ د ترلاسه کولو پرمهال د کڅوړې محتويات وګورئ. که کوم توکي ورک یا زیانمن شوي وي، سمدلاسه خپل پلورونکي سره اړیکه ونیسئ.
| توکي | مقدار |
|---|---|
| Dual-channel oscilloscope-O2 host | 1 |
| 10X Oscilloscope Probe | 1 |
| Red and Black Alligator Clip Probe | 1 |
| د USB ډول - سي کیبل | 1 |
| د ایوا ذخیره کولو کڅوړه | 1 |
| Oscilloscope Manual | 1 |
| د محصول سند | 1 |
4. مشخصات
| صفت | ارزښت |
|---|---|
| د برانډ نوم | د BSIDE |
| د ماډل شمیره | O2 |
| د بند پراخوالی | 50MHz |
| ریښتیني وخت Sampد نرخ کچه | 250MSa / s |
| ډیجیټل چینلونه | 2 |
| د ښودلو ریزولوشن | 488 * 320px |
| د ښودلو اندازه | 3.98 Inches (TFT LCD) |
| د ریکارډ اوږدوالی | 128kb |
| بیټرۍ پکې شامله ده | Yes (3000mAh lithium battery) |
| تصدیق | CE، RoHS، FCC |
| د DIY تجهیزات | بریښنایی |
| اصل | مینلینډ چین |
| ابعاد (L*W*H) | 170.0*80.9*23.9mm |
| وزن | 0.533 کیلو ګرامه |
5. د خوندیتوب معلومات
مهرباني وکړئ د وسیلې له چلولو دمخه د خوندیتوب ټولې لارښوونې ولولئ او پوه شئ. د دې لارښوونو په تعقیب کې پاتې راتلل ممکن د بریښنا شاک، اور، یا وسیله ته زیان ورسوي.
- تل صحیح والی وکاروئtage and current settings for your measurements.
- وسیله د لندبل یا خورا تودوخې سره مه ښکاره کوئ.
- Ensure probes are properly connected and insulated before making measurements.
- Avoid touching exposed wires or components while the device is powered on.
- د وسیلې د ترمیم یا ترمیم هڅه مه کوئ. د وړ خدماتو پرسونل ته مراجعه وکړئ.
- وسیله د قوي بریښنایی مقناطیسي ساحو څخه لرې وساتئ.
6. ترتیب کول
6.1 د وسیلې چارج کول
The BSIDE O2 comes with a built-in rechargeable lithium battery. Use the provided USB Type-C cable to charge the device. Connect one end of the cable to the device's Type-C port and the other end to a standard USB power adapter (not included) or a computer's USB port. The charging indicator will show the charging status.
6.2 د نښلولو تحقیقات
- **Oscilloscope Probe (10X):** Connect the BNC connector of the oscilloscope probe to the OSC 1 or OSC 2 input port on the top of the device. Ensure it is securely twisted into place.
- **Alligator Clip Probe:** For signal generation, connect the red and black alligator clip probe to the 'OUTPUT' port on the side of the device.
6.3 بریښنا کول / بندول
Press and hold the power button (usually located on the side or front panel) for a few seconds to turn the device on or off.
7. عملیاتي لارښوونې
7.1 بنسټیز نیویګیشن
The device features a resistive touch screen and a function wheel for navigation. Use your finger or a stylus to interact with the touch screen menus and adjust settings. The function wheel can be used for fine adjustments or menu selection depending on the active mode.
۵.۲ د اوسیلوسکوپ حالت
The BSIDE O2 operates as a dual-channel oscilloscope. You can select between Channel 1 (CH1) and Channel 2 (CH2) inputs.
- **Channel Selection:** Tap 'OSC 1' or 'OSC 2' on the screen to select the active channel.
- **Coupling (AC/DC):** Tap the coupling setting (e.g., 'ACx1', 'DCx10') to switch between AC and DC coupling modes.
- ** ټوکtage Scale:** Adjust the vertical scale (Volts/Div) by tapping the voltage display or using the function wheel.
- **Time Base:** Adjust the horizontal scale (Time/Div) by tapping the time display or using the function wheel.
- **Trigger Settings:** Tap 'TRIGGER' to access trigger options. You can set the trigger level, edge (rising/falling), and mode (Auto, Normal, Single).
- **Measurements:** The device automatically displays key waveform parameters such as Vpp (Peak-to-Peak Voltage), Vmax (Maximum Voltage), Vmin (Minimum Voltage), Vavg (Average Voltage), RMS (Root Mean Square), Duty Cycle, and Frequency.
8. Signal Generator Function
The integrated signal generator can produce various waveforms for testing and calibration purposes.
- **Access Signal Generator:** Navigate to the signal generator interface (refer to the device's on-screen menu for specific access).
- **Select Waveform:** Choose from 7 types of signal waveforms, including Sine, Square, Tunable Pulse, Triangular, Positive Sawtooth, Irregular Noise, Positive Full Wave, Negative Full Wave, Multi-frequency Waves, Banner Waveform, Lorentz Pulse, Multi-frequency Tone, Trapezoidal Pulses, Zink Pulse, Positive Half-Wave, Negative Half-Wave, Electrocardiogram, and Gaussian White Noise.
- **Adjust Parameters:** Set the desired amplitude, frequency, and duty cycle using the touch screen controls or the function wheel.
- **Output Signal:** Connect the alligator clip probe to the 'OUTPUT' port and to your circuit under test.
9. د معلوماتو لیږد
The BSIDE O2 allows for easy data management and secondary analysis by connecting to a PC via a USB cable.
- Connect the device to your computer using the provided USB Type-C cable.
- The device should appear as a removable storage device on your computer.
- You can then transfer recorded waveform data for further analysis using compatible software.
10. ساتنه
- **Cleaning:** Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- **Storage:** Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided EVA storage bag for protection.
- **Battery Care:** To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.
- **Probe Care:** Handle probes carefully. Do not bend or twist the cables excessively. Inspect probes for damage before each use.
11. ستونزه حل کول
- **Device not powering on:** Ensure the battery is charged. Connect the device to a power source using the USB Type-C cable and try again.
- **No waveform displayed:** Check if probes are correctly connected to the input channels. Verify the input signal is within the device's measurement range. Adjust voltage and time scales. Check trigger settings.
- **Inaccurate readings:** Ensure probes are properly calibrated (if applicable) and that the correct probe attenuation (e.g., 1X, 10X) is selected on both the probe and the device.
- **Touch screen unresponsive:** Try restarting the device. Ensure the screen is clean and dry.
- **Signal generator not outputting:** Check if the alligator clip probe is correctly connected to the 'OUTPUT' port. Verify the signal generator settings (waveform, amplitude, frequency) are configured.
12. د کارن لارښوونې
- For quick measurements, utilize the 'AUTO' function to automatically adjust the display settings.
- Familiarize yourself with the function wheel for precise adjustments, especially when fine-tuning waveform parameters.
- Regularly back up your recorded data to a computer to prevent loss.
- کله چې د لوړ حجم اندازه کولtages, always use the 10X attenuation setting on your oscilloscope probe and ensure it is correctly set on the device to prevent damage and ensure safety.
13. تضمین او ملاتړ
For warranty information, technical support, or service inquiries, please refer to the product certificate included in your package or contact the BSIDE Tools Store directly. Keep your purchase receipt as proof of purchase.
