1. پیژندنه
The Roborock A10 UltraE is a versatile smart floor washing machine designed to simplify your home cleaning routine. It integrates multiple functions including floor washing, vacuuming, and mite removal, offering a comprehensive solution for various cleaning needs. This manual provides detailed instructions on how to set up, operate, and maintain your device to ensure optimal performance and longevity.
Image 1.1: The Roborock A10 UltraE functions as a floor washer, vacuum cleaner, and mite remover.
کلیدي ځانګړتیاوې:
- Multi-functional Cleaning: Combines floor washing (with 99.2% sterilization rate), vacuuming (17000Pa high suction power), and mite removal.
- سمارټ ډیزاین: Features high torque for strong wiping force, front-drive booster for easier maneuverability, and extreme edge cleaning capability (up to 0.30cm from walls).
- Advanced Self-Cleaning: Two-way self-cleaning system with up to 99.7% cleaning rate, complemented by centrifugal hot air double drying (over 99% drying rate at 55°C).
- Long-lasting Antibacterial Protection: Provides 24-hour all-weather antibacterial action without manual electrolysis, thanks to silver ions in the clean water tank, antibacterial roller brush, and filter.
- هوښیار عملیات: Auto smart escrow intelligently identifies dirt levels and adjusts suction, water volume, and brush speed. Supports customization via the Roborock App for timed cleaning and mode selection.
- د بیټرۍ اوږد ژوند: Offers up to 65 minutes of floor washing and 60 minutes of vacuuming, covering an area of up to 280 m².
2. د بسته محتويات
Please check the package carefully upon receipt to ensure all components are present and in good condition. The standard package for the Roborock A10 UltraE includes:
Image 2.1: Main components of the Roborock A10 UltraE.
- Main Unit (Floor Washer)
- سمبالول
- Roller Brush (pre-installed or spare)
- Floor Brush Attachment
- Two-in-one Brush Head (Crevice/Brush tool)
- Bed Brush (Mite Remover attachment)
- Dust Bin (for handheld vacuum mode)
- Extension Rod (for handheld vacuum mode)
- د بریښنا تار
- د پاکولو برش
- Suction Storage Rack
- Drying Charging Base
- Cleaning Solution (gift)
- Filter (gift)
3. مشخصات
Technical specifications for the Roborock A10 UltraE:
| فیچر | مشخصات |
|---|---|
| د برانډ نوم | روبروک |
| ماډل | A10 UltraE |
| فعالیت | Mopping, Sweeping, Suction Type |
| د موټرو ډول | بې برش موټور |
| ځواک (W) | 260W |
| والیtage | 220 وی |
| سکشن ځواک | 17000Pa |
| د موټرو سرعت | تر 110000 rpm پورې |
| د دوړو کپ ظرفیت | 465mL |
| Floor Washing Battery Life | تر 65 دقیقو پورې |
| Vacuuming Battery Life | تر 60 دقیقو پورې |
| د پاکولو پوښښ | تر 280 m² پورې |
| Sterilization Rate (Floor) | 99.2% |
| Self-Cleaning Rate | تر 99.7٪ پورې |
| Drying Rate | له 99٪ څخه ډیر |
| Edge Cleaning Distance | 0.30 سانتي متره |
| تصدیق | CE |
| اصل | مینلینډ چین |
4. ترتیب کول
4.1 مجلس
- لاسي سره ضمیمه کړئ: Insert the handle into the main unit until it clicks securely into place.
- Install Roller Brush: If not pre-installed, align the roller brush with its slot in the main unit's cleaning head and push until it locks.
- Prepare for Handheld Use (Optional): To use as a handheld vacuum or mite remover, detach the main unit from the floor washing head. Attach the extension rod and desired accessory (e.g., two-in-one brush head, bed brush) to the main unit.
Image 4.1: The Roborock A10 UltraE with its main unit and various attachments for different cleaning tasks.
4.2 چارج کول
- د چارج کولو په اساس کې ځای: Position the main unit onto the drying charging base. Ensure the charging contacts align.
- بریښنا وصل کړئ: Plug the power cord into the charging base and then into a suitable power outlet (220V).
- د چارج کولو شاخص: The device will indicate charging status, typically via an LED light or screen display. Allow for a full charge before first use.
5. عملیاتي لارښوونې
5.1 Floor Washing Mode
- د اوبو ټانک ډک کړئ: Fill the clean water tank with water and, if desired, the provided cleaning solution.
- پاور آن: د وسیله د چالانولو لپاره د بریښنا تڼۍ فشار ورکړئ.
- حالت غوره کړئ: Use the controls on the handle or the Roborock App to select the desired cleaning mode (e.g., Auto, Max, Water absorption, Light mop).
- پاکول پیل کړئ: Begin moving the device across the floor. The front-drive booster will assist in movement. The device intelligently detects dirt and adjusts cleaning power.
- د څنډې پاکول: Utilize the device's design for close-to-wall cleaning, reaching within 0.30cm of edges.
Image 5.1: High torque and extreme edge cleaning capabilities.
Image 5.2: Maneuverability with 80° rotation and precise wall-edge cleaning.
5.2 Vacuuming Mode
- Assemble Handheld Unit: Detach the main unit from the floor washing head. Attach the extension rod and the floor brush attachment or the two-in-one brush head.
- پاور آن: د بریښنا تڼۍ فشار ورکړئ.
- خلا: Use the device to vacuum dry debris from floors, carpets, or other surfaces. The 17000Pa suction power is effective for various tasks.
Image 5.3: Powerful 17000Pa suction for effective vacuuming.
5.3 Mite Removal Mode
- Attach Mite Remover: Detach the main unit and attach the bed brush (mite remover attachment).
- پاور آن: د بریښنا تڼۍ فشار ورکړئ.
- د سطحې پاکول: Use the mite remover on mattresses, sofas, and other fabric surfaces to effectively remove dust mites and allergens.
Image 5.4: Effective mite removal with four-fold filtration system.
5.4 Smart Features and App Control
- Auto Smart Escrow: The device automatically senses dirt levels and adjusts cleaning parameters for optimal results.
- اصلاح کول: Download the Roborock App to customize cleaning modes, set timed cleaning schedules, and monitor cleaning status.
- Intelligent Timed Cleaning: Set a specific time for the device to automatically perform self-cleaning and drying cycles.
Image 5.5: App interface showing intelligent dirt detection and customizable settings.
Image 5.6: Setting intelligent timed washing and drying.
6. ساتنه
Regular maintenance ensures the longevity and optimal performance of your Roborock A10 UltraE.
6.1 Self-Cleaning and Drying
- Initiate Self-Cleaning: After each use, place the main unit on the drying charging base. The device will automatically initiate a two-way self-cleaning cycle for the roller brush.
- په ګرمه هوا کې وچول: Following self-cleaning, the centrifugal hot air drying system will activate, drying the roller brush at 55°C to prevent odors and bacterial growth.
Image 6.1: Two-way self-cleaning and centrifugal hot air double drying.
Image 6.2: RevoBrush™ two-way deep self-cleaning process.
6.2 Cleaning the Dust Bin and Filters
- د دوړو خالي کول: Regularly empty the 465mL dust bin, especially after vacuuming.
- پاک فلټرونه: The device features a four-fold filtration system. Periodically remove and clean the filters according to the instructions in the app or on the device. Ensure filters are completely dry before re-installing.
Image 6.3: Antibacterial roller brush and filter for enhanced hygiene.
6.3 Roller Brush and Cleaning Head Maintenance
- Inspect Roller Brush: Check the roller brush regularly for tangled hair or debris. Use the provided cleaning brush to remove any obstructions.
- Clean Cleaning Head: Wipe down the cleaning head and surrounding areas to remove any accumulated dirt or residue. The removable tray on the charging base can be detached for easier cleaning.
7. ستونزه حل کول
If you encounter issues with your Roborock A10 UltraE, please refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| وسیله فعاله نه ده | Low battery; Power cord not connected; Device malfunction | Charge the device fully; Ensure power cord is securely connected; Contact support if issue persists. |
| ضعیف سکشن ځواک | Dust bin full; Filter clogged; Obstruction in nozzle/brush | Empty dust bin; Clean or replace filters; Remove any obstructions from the cleaning path. |
| Ineffective floor washing | Clean water tank empty; Dirty water tank full; Roller brush tangled/worn; Nozzle clogged | Refill clean water tank; Empty dirty water tank; Clean roller brush; Clear nozzle. |
| Unpleasant odor after cleaning | Roller brush not dried properly; Dirty water tank not cleaned | Ensure hot air drying cycle completes; Regularly clean the dirty water tank and roller brush. |
| Device not self-cleaning | Not placed correctly on charging base; Insufficient water in clean tank for self-cleaning | Ensure device is properly docked; Fill clean water tank. |
8. د کارن لارښوونې
- Utilize Timed Cleaning: Set up timed self-cleaning and drying cycles via the Roborock App to ensure your device is always fresh and ready for use, preventing odors and maintaining brush hygiene.
- Customize Cleaning Modes: Experiment with the different cleaning modes and customization options in the app to find the perfect settings for various floor types and dirt levels in your home.
- Leverage Edge Cleaning: For thorough cleaning along walls and furniture, guide the device slowly to allow its specialized edge cleaning feature to work effectively.
- د فلټر منظم معاینات: Although the device has a robust filtration system, regularly checking and cleaning the filters will maintain optimal suction and air quality.
- Handheld Versatility: Don't forget the versatility of the handheld vacuum and mite remover attachments for cleaning upholstery, car interiors, and hard-to-reach spots.
9. تضمین او ملاتړ
Your Roborock A10 UltraE is covered by a manufacturer's warranty. Please refer to the warranty card included in your original packaging for specific terms and conditions, including warranty period and coverage details.
For technical support, service, or inquiries regarding your product, please contact the official Roborock customer service or the authorized seller from whom you purchased the device. Keep your proof of purchase handy when contacting support.
