1. پیژندنه
The CADDXFPV Eclipse Thermal Camera is an advanced thermal imaging solution designed for various applications, including FPV (First Person View) drones. This manual provides essential information for the proper setup, operation, and maintenance of your thermal camera system. Please read this manual thoroughly before using the product to ensure safe and optimal performance.
2. د خوندیتوب معلومات
- Do not expose the camera to extreme temperatures, direct sunlight for prolonged periods, or corrosive environments.
- د قوي تاثیراتو سره د وسیله له مینځه وړلو یا تابع کولو څخه ډډه وکړئ.
- ډاډ ترلاسه کړئ چې صحیح حجمtage is supplied to the device as specified in the 'Specifications' section. Incorrect voltage کولی شي دایمي زیان لامل شي.
- وسیله د اوبو او رطوبت څخه لرې وساتئ.
- Do not attempt to disassemble or modify the camera system. This will void the warranty and may cause damage.
- Use only original or approved accessories.
3. اجزاوو ختمview
The CADDXFPV Eclipse Thermal Camera system typically includes the following main components:
- د حرارتي کیمرې ماډل: The primary unit responsible for capturing thermal images.
- Main Processing Unit: Handles video processing, power management, and interfaces.
- انتن: For video transmission (if applicable to your specific variant).
- د کیبلونو نښلول: For power, video, and data transmission between modules.
4. مشخصات
The following specifications apply to the Eclipse Camera-640HD model. Specifications may vary slightly for other variants (384, 256).
| فیچر | تفصیل |
|---|---|
| د کشف کولو ډول | نه یخ شوی وینډیم آکسایډ |
| قرارداد | ۲۵۶x۱۹۲ @ ۱۲µm |
| د طول موج سلسله | 8 ~ 14µm |
| NETD | ≤40mk @ F1 25°C |
| لینس | F1.0/4mm/50°(H)*37.2°(V)*62.3°(D) |
| د چوکاټ نرخ | 50 fps |
| د بریښنا مصرف | <1.5w |
| محصول | پال |
| عرضه کولtage | 5v~20v |
| لینس | 4mm |
| د عملیاتي حرارت درجه | -20°C~60°C |
| انګیزې برسیر | CVBS |
| HD انٹرفیس | MIPI-CSI/Walksnail Avatar |
| ځنډ | د منځنۍ مودې ځنډ ۲۰ ملیونه ثانیې |
| د انځور کیفیت | د مصنوعي ذهانت انځور لوړول |
| مواد | سټینلیس سټیل |
| د کنټرول وړ واټن | 200~800 (units not specified, typically meters for FPV) |
5. سیټ اپ او ویرینګ
Carefully follow the wiring diagrams below to connect your CADDXFPV Eclipse Thermal Camera system. Incorrect wiring can damage the device and connected components.
5.1 UART پیوستون
This connection is typically used for data communication, such as OSD (On-Screen Display) control or flight controller integration.
| پن | فعالیت |
|---|---|
| TX2 | UART Transmit 2 |
| RX2 | UART Receive 2 |
| GND | ځمکه |
| 5V0 | د 5V بریښنا تولید |
5.2 Main Power and Video Output
This connection provides power to the unit and outputs the video signal. Ensure the power supply is within the specified voltage رینج (9V-26V).
| پن | فعالیت |
|---|---|
| CVBS | د انلاګ ویډیو محصول |
| Power 9V-26V | Main Power Input (9V to 26V) |
| GND | ځمکه |
| OSD | په پرده د ښودلو کنټرول |
| V-BUS | والیtage Bus (Power Output) |
یادونه: Always double-check your wiring before applying power to prevent damage to the camera or other electronic components.
6. عملیاتي لارښوونې
6.1 فعالول
Once correctly wired, apply power within the specified voltage range (5V-20V for the camera module, 9V-26V for the main unit). The system should initialize, and thermal video output will be available via the CVBS (Analog) or MIPI-CSI/Walksnail Avatar (HD) interfaces.
6.2 د ویډیو محصول
The camera outputs a PAL video signal. Ensure your display device or video receiver is compatible with PAL format. The HD interface supports MIPI-CSI and Walksnail Avatar systems for high-definition thermal video.
۲.۴ حرارتي انځورګري
The camera utilizes an uncooled vanadium oxide detector to capture thermal radiation. The AI Image Enhancement feature helps improve the clarity and detail of the thermal feed. The latency is approximately 20ms, providing a responsive experience for FPV applications.
7. ساتنه
- پاکول: Gently clean the camera lens and housing with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- ذخیره کول: کیمره په یخ او وچ ځای کې وساتئ، د مستقیم لمر وړانګو او سختې تودوخې څخه لرې.
- معاینه: په منظمه توګه کیبلونه او نښلونکي معاینه کړئ ترڅو د هر ډول اغوستو یا زیان نښو لپاره.
8. ستونزه حل کول
- ځواک نشته: Check all power connections and ensure the supply voltage is within the specified range (9V-26V for the main unit). Verify that the power source is functioning correctly.
- د ویډیو محصول نشته: Confirm that the video output cable (CVBS or HD interface) is securely connected to your display device or video receiver. Ensure your display is set to the correct input and supports PAL format for analog output.
- د عکس ضعیف کیفیت: Check for any obstructions on the camera lens. Ensure the camera is operating within its specified temperature range (-20°C to 60°C).
- وقفه ای سیګنال: Inspect antenna connections for tightness and ensure they are not damaged. Check for potential interference sources in your operating environment.
9. د کارن لارښوونې
- For optimal thermal performance, allow the camera a few moments to stabilize after powering on, especially in varying ambient temperatures.
- Experiment with different mounting positions on your drone or platform to find the best field of view and minimize vibrations.
- Keep the lens clean to ensure clear thermal imagery. Dust or smudges can significantly degrade performance.
- When using the HD interface, ensure your digital FPV system (e.g., Walksnail Avatar) is updated to the latest firmware for best compatibility and features.
10. تضمین او ملاتړ
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, please reach out to the CADDXFPV customer service channels.
11. د اړیکو معلومات
For further assistance or inquiries, please contact CADDXFPV customer support through their official webسایټ یا مجاز توزیع کونکي.
