1. پیژندنه
This manual provides detailed instructions for the installation, operation, and maintenance of your JGINYUE B760M Snow Dream D4 motherboard. Designed to support Intel's 12th and 13th generation LGA1700 platform processors, this motherboard offers robust performance with dual-channel DDR4 memory support, multiple high-speed M.2 NVMe interfaces, and comprehensive connectivity options. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.
2. د خوندیتوب معلومات
د مور بورډ د سمبالولو او نصبولو پر مهال تل لاندې خوندیتوب احتیاطي تدابیر په پام کې ونیسئ:
- د الیکتروسټیک خارج کیدو (ESD) احتیاطي تدابیر: Always wear an anti-static wrist strap or frequently touch a grounded metal object (like the computer case) before handling components.
- بندول: ډاډ ترلاسه کړئ چې د بریښنا رسولو د دیوال له سایټ څخه منحل شوی دی مخکې له دې چې کوم اجزا نصب یا لرې کړئ.
- په احتیاط سره سمبالول: د سرو زرو د تماسونو د لمس کولو څخه ډډه وکړئ. د سرکټ بورډونه د هغوی د څنډو سره ونیسئ.
- وینټیلیشن: د ډیر تودوخې مخنیوي لپاره د خپل کمپیوټر په قضیه کې د هوا مناسب جریان ډاډمن کړئ.
- د اجزاو مطابقت: Verify that all components (CPU, RAM, GPU, PSU) are compatible with this motherboard.
3. ترتیب او نصب کول
3.1 اجزا ختمview
Familiarize yourself with the layout of your JGINYUE B760M Snow Dream D4 motherboard. The diagram below highlights key components and connectors.
۴.۲ د CPU نصب کول (LGA ۲۰۱۱)
- د LGA1700 CPU ساکټ په مور بورډ کې ومومئ.
- Gently push down the load lever and move it sideways to open the CPU socket cover.
- Carefully align the notches on your Intel 12th/13th Gen processor with the keys on the socket.
- Place the CPU into the socket without applying force. The CPU should sit flush.
- Close the socket cover and push the load lever back into its original position until it clicks.
- په CPU کې حرارتي پیسټ واچوئ او د CPU کولر د جوړونکي لارښوونو سره سم نصب کړئ.
۴.۳ د حافظې (RAM) نصب کول
The motherboard supports dual-channel DDR4 memory across four slots. For optimal dual-channel performance, install memory modules in slots 1A and 2A (G1 mode) first, then 1B and 2B if using four modules.
- د DIMM سلاټ په دواړو سرونو کې کلپونه خلاص کړئ.
- د DDR4 حافظې ماډل کې نوچ د DIMM سلاټ کې کیلي سره سم کړئ.
- ماډل په کلکه په سلاټ کې دننه کړئ تر هغه چې کلپونه په خپل ځای کې راشي.
- Repeat for additional modules, following the dual-channel configuration.
3.4 د ذخیره کولو وسیله نصب کول
M.2 NVMe SSDs:
The motherboard features three M.2 NVMe interfaces (two PCIe 4.0, one PCIe 3.0).
- Locate the M.2 slots, often covered by heatsinks. Remove the heatsink and screw.
- د M.2 SSD په سلاټ کې د 30 درجې زاویه کې دننه کړئ.
- په نرمۍ سره SSD ښکته کړئ او د سکرو سره یې خوندي کړئ.
- د غوره حرارتي فعالیت لپاره M.2 هیټسینک بیا وصل کړئ.
د SATA ډرایوونه:
Connect up to four SATA 3.0 6Gbps devices (HDDs/SSDs) using SATA data cables to the SATA ports on the motherboard. Ensure power cables from the PSU are also connected to the drives.
۲.۵ د توسعې کارت نصبول
The motherboard provides two PCI Express X16 4.0 slots (one operating at x16, the other at x4).
- Align your graphics card or other PCIe expansion card with the desired PCIe x16 slot.
- Press down firmly until the card is seated correctly and the retention clip at the end of the slot locks into place.
- کارت د سکرو سره چیسس ته خوندي کړئ.
3.6 د بریښنا اتصال
- د ۲۴ پن ATX ځواک: Connect the main 24-pin power cable from your power supply unit (PSU) to the corresponding connector on the motherboard.
- 8-pin CPU Power: Connect the 8-pin CPU power cable (EPS12V) from your PSU to the connector near the CPU socket.
- 4-pin CPU Power: If your PSU has an additional 4-pin CPU power cable, connect it to the supplementary 4-pin connector near the CPU socket.
3.7 Fan and RGB Connections
- د پرستار سرلیکونه: Connect your CPU cooler fan to the CPU_FAN header. Connect case fans to the available 4-pin (x2) or 3-pin (x3) fan headers.
- د RGB سرلیکونه: Connect compatible RGB lighting strips or devices to the two 5V3 pin RGB headers.
۲.۷ د مخکینۍ پینل او شاته I/O اتصالونه
- د مخکینۍ پینل نښلونکي: Connect your case's front panel USB (1x USB 2.0, 1x USB 3.2), audio, power switch, reset switch, and LED indicators to the corresponding headers on the motherboard.
- شاته I/O: Connect peripherals such as keyboard, mouse, monitor (via HDMI or DisplayPort), Ethernet cable, and audio devices to the rear I/O panel.
- د وائی فای انتن: Screw in the provided WiFi antenna(s) to the WiFi interface connectors on the rear I/O panel.
4. عملیاتي لارښوونې
۵.۶ د پیل پیل او د BIOS تنظیم کول
- د ټولو برخو د راټولولو وروسته، خپل مانیټر، کیبورډ او موږک سره وصل کړئ.
- Connect the power cable to the PSU and turn on the power switch on the PSU.
- د خپل کمپیوټر په قضیه کې د بریښنا تڼۍ فشار ورکړئ.
- During startup, repeatedly press the 'DEL' or 'F2' key (common BIOS entry keys) to enter the BIOS/UEFI setup utility.
- In the BIOS, you can configure boot order, enable XMP for memory, adjust fan speeds, and set other system parameters.
- The motherboard features a One-key Clear BIOS button on the rear I/O panel. This can be used to reset BIOS settings to default if you encounter boot issues due to incorrect configurations.
4.2 د ډرایور نصب کول
After installing your operating system (Windows 10 or Windows 11 recommended), install the necessary drivers for the motherboard's chipset, LAN, audio, and any other integrated components. These drivers are typically provided on a support CD/USB or can be downloaded from the manufacturer's webسایټ
۵.۴ د RGB رڼا کنټرول
Utilize compatible RGB software (often provided by the motherboard manufacturer or third-party utilities) to customize the lighting effects of devices connected to the 5V3 pin RGB headers.
5. ساتنه
- پاکول: په منظم ډول د خپل کمپیوټر د قضیې دننه دوړې پاکې کړئ، په ځانګړې توګه د فینونو او هیټسینکونو څخه، د فشار شوي هوا په کارولو سره. ډاډ ترلاسه کړئ چې سیسټم د پاکولو دمخه بند او پلګ شوی دی.
- د BIOS تازه معلومات: په دوره یي ډول د تولید کونکي معاینه وکړئ website for BIOS/UEFI updates. Updating the BIOS can improve system stability, compatibility, and performance. Follow the update instructions carefully to avoid damaging the motherboard.
- حرارتي مدیریت: The motherboard features a "Full coverage heat dissipation armor" to enhance heat transfer. Ensure proper case airflow to maximize its effectiveness.
6. ستونزه حل کول
The motherboard includes a DEBUG diagnostic light on the rear I/O panel to assist with troubleshooting boot issues. These LEDs typically indicate the status of CPU, DRAM, VGA, and BOOT during startup.
- ځواک نشته: Check all power connections (24-pin, 8-pin CPU, 4-pin CPU) from the PSU to the motherboard. Ensure the PSU is switched on and connected to a working power outlet.
- نه ښودنه: Verify that the monitor is connected to the correct display output (HDMI or DisplayPort) on the graphics card or motherboard (if using integrated graphics). Reseat the graphics card and memory modules. Check the DEBUG LEDs for VGA or DRAM errors.
- د سیسټم بې ثباتي/خرابی: This could be due to incompatible RAM, overheating, or outdated drivers. Check memory compatibility, monitor temperatures, and update drivers.
- Boot Loop: If the system enters a boot loop, try clearing the CMOS using the One-key Clear BIOS button or by removing the CMOS battery for a few minutes.
- پردی نه دی موندل شوی: Ensure USB devices are properly connected. For M.2 or SATA drives, check connections and ensure they are enabled in BIOS.
7. مشخصات
Below are the detailed specifications for the JGINYUE B760M Snow Dream D4 Motherboard:
| فیچر | مشخصات |
|---|---|
| ماډل | B760M Snow Dream D4 |
| چپسیټ | Intel B760 |
| د CPU ساکټ | LGA 1700 (Supports Intel 12th/13th Gen i3/i5/i7/i9 Processors) |
| حافظه | 4x DDR4 DIMM slots, Dual Channel, 2133-4000MHz (XMP support), Max 128GB |
| Power Supply Phases | DR MOS 14+1+1 phase |
| د PCIe توسیع سلاټونه | 2x PCI Express X16 4.0 slots (one is 4.0 x4) |
| د SATA انٹرفیس | 4x SATA3.0 6Gbps interfaces |
| M.2 انٹرفیس | 3x M.2 NVMe protocol interfaces (2x PCIe 4.0, 1x PCIe 3.0) |
| USB Interface (Rear) | 4x USB 2.0، 2x USB 3.2 |
| USB Interface (Front) | 1x USB 2.0، 1x USB 3.2 |
| برسیر ښودل | ۲x HDMI، ۱x ډیسپلی پورټ |
| د شبکې کارت | 2.5G network card interface |
| بيسيم برسیر | 1x WiFi interface (compatible with PCIE/CNVI protocols) |
| آډیو | Realtek ALC897 |
| فین سرلیکونه | 2x 4-pin, 3x 3-pin |
| RGB Headers | 2x 5V3 pin RGB |
| نورې خبرې | 1x Type-C, 1x One-key Clear BIOS button, DEBUG diagnostic light, 1x SPK1 buzzer pin |
| د فارم فکتور | M-ATX (24.5cm x 24.5cm) |
| ملاتړ شوی OS | وینډوز 10، وینډوز 11 |
8. د کارن لارښوونې
- د اجزاو مطابقت: Always double-check the compatibility of your CPU, RAM, and other components with the B760M chipset and LGA1700 socket before purchase and installation.
- د BIOS تازه معلومات: While not always necessary, keeping your BIOS updated can resolve compatibility issues and improve performance. Always follow the official update procedure.
- د کیبل مدیریت: Good cable management not only makes your build look cleaner but also improves airflow, contributing to better cooling and system stability.
9. تضمین او ملاتړ
For warranty information, technical support, or service inquiries, please refer to the official JGINYUE webسایټ یا د خپل پیرود ځای سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
