دستورالعملونه+

AMAZON CON4

AMAZON CON4 Sauna Stove Controller Instruction Manual

Model: CON4

Brand: AMAZON

1. پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of the AMAZON CON4 Sauna Stove Controller. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of your sauna heater.

2. د خوندیتوب معلومات

خبرداری: د بریښنا نصب کول باید یوازې د یو وړ بریښنایی متخصص لخوا د ټولو محلي او ملي بریښنا کوډونو سره سم ترسره شي.

  • Always disconnect power to the sauna heater before performing any installation, maintenance, or troubleshooting.
  • Do not operate the controller with wet hands or in wet conditions.
  • ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي او په سمه توګه موصل شوي دي.
  • Keep the control panel and control box away from water and high humidity.
  • This device is intended for controlling sauna stoves. Do not use it for other purposes.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

  • AMAZON CON4 Control Panel
  • Control Box (Power Unit)
  • Temperature Probe Cable
AMAZON CON4 Sauna Stove Controller components
شکل 1: پایview of the CON4 Sauna Stove Controller components, including the control panel, control box, and temperature probe cable.

4. مشخصات

فیچرتفصیل
ماډلCON4
ډولHand Tool Parts (Sauna Stove Controller)
اصلمینلینډ چین
جوړونکیQianwang sauna swimming pool equipment
Control Panel Dimensions (approx.)24.5 cm x 21 cm x 10 cm
د بستې وزن (تقریبا)7.0 کیلو ګرامه
د بسته بندۍ ابعاد (تقریبا)45 cm x 45 cm x 45 cm
CON4 Control Panel Dimensions
Figure 2: Image indicating the model CON4 and its approximate dimensions (24.5*21*10cm for the single controller).

5. نصب او تنظیم کول

Proper installation is crucial for the safe and effective operation of the sauna stove controller. It is highly recommended that installation be performed by a certified electrician.

5.1 د اجزاو پیژندنه

د اصلي برخو سره ځان آشنا کړئ:

  • د تضمین اداره: The user interface for setting time and temperature.
  • د کنټرول بکس: The main power unit that connects to the sauna heater and power supply.
  • د حرارت درجه څیړنه: Measures the room temperature in the sauna.
CON4 Control Panel with Temperature Probe
Figure 3: The CON4 control panel shown with its temperature probe cable. The probe cable connects to the control panel.

5.2 د تارونو نښلول

The control box handles the main electrical connections to the sauna heater and the power supply. The control panel connects to the control box, and the temperature probe connects to the control panel.

  1. پورته کول: Securely mount the control box and control panel in appropriate locations. The control panel should be easily accessible to the user, while the control box can be mounted in a less visible, but well-ventilated area.
  2. د بریښنا رسول: Connect the main power supply to the control box. Ensure the voltage and current ratings match your sauna heater and local electrical standards.
  3. Sauna Heater Connection: Connect the sauna heater's power cables to the designated terminals within the control box.
  4. د کنټرول پینل پیوستون: Connect the control panel to the control box using the provided cable.
  5. Temperature Probe Installation: Install the temperature probe inside the sauna room, typically on a wall at a recommended height (refer to your sauna heater's manual for specific placement). Connect the temperature probe cable to the designated port on the control panel.

CAUTION: Incorrect wiring can lead to electric shock, fire, or damage to the equipment. Always consult a professional for electrical installation.

6. عملیاتي لارښوونې

The CON4 control panel features an intuitive interface for managing your sauna experience.

CON4 Control Panel Interface
4 شکل: تړل view of the CON4 control panel, showing digital displays and control buttons.

6.1 د کنټرول پینلview

د کنټرول پینل کې شامل دي:

  • ډیجیټل نندارې: Two displays show "Time Remaining" and "Room Temperature".
  • تڼۍ:
    • وخت ټاکل: Adjusts the sauna operating time.
    • د حرارت درجه تنظیم کړئ: Adjusts the desired sauna room temperature.
    • Mode A/B: Selects between different operating modes (details may vary, refer to specific sauna heater manual).
    • ر Lightا آن/آف: Controls the sauna room lighting.
    • آن/بند: Powers the sauna heater on or off.
    • پورته/ښکته تیرونه: Used to increase or decrease time and temperature settings.

6.2 بنسټیز عملیات

  1. پاور آن/بند: فشار ورکړئ آن/بند button to turn the sauna heater system on or off.
  2. د وخت ټاکل:
    1. فشار ورکړئ وخت ټاکل تڼۍ
    2. د کارولو پورته / ښکته تیرونه to adjust the desired operating time.
    3. The display will show the remaining time during operation.
  3. د حرارت درجه تنظیم کول:
    1. فشار ورکړئ د حرارت درجه تنظیم کړئ تڼۍ
    2. د کارولو پورته / ښکته تیرونه to adjust the desired room temperature.
    3. نندارتون به د خونې اوسنی تودوخې وښیې.
  4. Controlling Light: فشار ورکړئ څراغ فعال/بند button to toggle the sauna room light.
  5. د موډل انتخاب: If your sauna heater supports multiple modes, press the Mode A/B button to switch between them.

7. ساتنه

Regular maintenance ensures the longevity and proper functioning of your sauna stove controller.

  • پاکول: Wipe the control panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • معاینه: په دوره یي ډول د تارونو ټولې اړیکې د ټینګښت او د اغوستلو یا زیان نښو لپاره وګورئ.
  • چاپیریال: Ensure the control panel and control box are kept in a dry environment, free from excessive dust or moisture.

WARNING: Always disconnect power before cleaning or inspecting the control box or any electrical components.

8. ستونزه حل کول

If you encounter issues with your sauna stove controller, try the following basic troubleshooting steps:

  • ځواک نشته:
    • Check the main power supply to the control box.
    • ډاډ ترلاسه کړئ چې ټول بریښنایی اړیکې خوندي دي.
    • تایید کړئ چې د آن/بند تڼۍ فشارول کیږي.
  • د تودوخې ناسم لوستل:
    • Ensure the temperature probe is correctly installed and connected to the control panel.
    • Check for any obstructions around the temperature probe that might affect its reading.
  • Sauna Heater Not Heating:
    • Verify that the desired temperature is set higher than the current room temperature.
    • Check the operating time setting; ensure sufficient time is allocated.
    • Confirm that the sauna heater itself is functioning correctly (refer to the sauna heater's manual).

د دوامداره ستونزو لپاره، مهرباني وکړئ د پیرودونکو ملاتړ سره اړیکه ونیسئ.

9. د کارن لارښوونې

To enhance your sauna experience and ensure the longevity of your equipment:

  • For optimal sauna experience, allow the sauna heater to preheat for at least 30-60 minutes before use.
  • Always ensure proper ventilation in the sauna room.
  • Regularly check the sauna stones and replace them if they are cracked or crumbling.

10. تضمین او ملاتړ

10.1 د تضمین معلومات

The AMAZON CON4 Sauna Stove Controller comes with the following warranty:

  • Main Electrical Components: One (1) year free warranty from the date of purchase for material and quality issues. This warranty does not cover accessories or other non-electrical parts.
  • د تودوخې ټیوب: Three (3) months or ninety (90) days warranty.

The company reserves the right to choose between repair or replacement. Any returns for repair must be pre-approved by the company. Return shipping costs are the responsibility of the customer.

تضمین هغه زیانونه نه پوښي چې پایله یې لري:

  • Incorrect use or operation.
  • Negligence or accidental breakage.
  • Improper power connection.
  • Modification or repair by unauthorized personnel.

After the warranty period, paid repair services are available, covering material costs for parts and travel expenses.

After-sales service policy in Chinese
Figure 5: Original after-sales service policy document (in Chinese).

10.2 د پیرودونکي ملاتړ

For any questions, technical assistance, or warranty claims, please contact us:

  • WhatsApp: +۴۵۷۴۸۸
  • بریښنالیک: 1434250503@qq.com
  • WeChat: 15576650740