پیژندنه
The Sherwood RX-4105 is a 2-channel remote-controlled stereo receiver designed to provide integrated preampجواز او amplification for various audio source components. It features advanced radio tuning capabilities and delivers 100 watts RMS per channel x 2, ensuring clear sound reproduction. This manual provides comprehensive instructions for setting up, operating, and maintaining your receiver.
په بکس کې څه دي
- Sherwood RX-4105 receiver
- ریموټ کنټرول
- د AC بریښنا رسولو تار
- د FM داخلي انتن
- AM loop antenna set
- د مالک لارښود (دا سند)
چمتو کول
Follow these steps to properly set up your Sherwood RX-4105 stereo receiver.
1. ځای پرځای کول
Place the receiver on a stable, flat surface with adequate ventilation. Ensure there is enough space around the unit for heat dissipation. Avoid placing it near heat sources or in direct sunlight.
۱. د انتنونو نښلول
Connect the supplied FM indoor antenna to the FM 75Ω terminal and the AM loop antenna to the AM LOOP terminals on the rear panel. For optimal reception, extend the FM antenna fully and position the AM loop antenna away from the receiver.
۲. د سپیکرو نښلول
The RX-4105 supports two pairs of loudspeakers (A and B). Use 16-gauge or thicker speaker wire for best results. Connect the positive (+) terminal of the receiver to the positive (+) terminal of the speaker, and the negative (-) terminal of the receiver to the negative (-) terminal of the speaker. Ensure correct polarity for both channels.
- سپیکر الف: Connect your primary pair of speakers to the SPEAKER A terminals.
- سپیکر ب: Connect a secondary pair of speakers (e.g., for another room) to the SPEAKER B terminals.
- دوه تارونه: If your speakers support bi-wiring, you can use both A and B outputs for a single pair of speakers for more efficient amplification (e.g., A for woofers, B for tweeters). Ensure your speakers are compatible.
Speaker Impedance: A, B - 8Ω MIN / SPEAKERS; A+B - 16Ω MIN / SPEAKERS
4. Connecting Audio Components
Connect your audio source components to the corresponding RCA input jacks on the rear panel. The receiver provides inputs for CD, TAPE (In/Out), TV/AUX, and VCR (In/Out).
- سي ډي: For CD players.
- TAPE (IN/OUT): For cassette decks or other recording devices.
- TV/AUX: For televisions or other auxiliary audio sources.
- VCR (IN/OUT): For VCRs or other video recording devices with audio output.
5. د بریښنا پیوستون
Once all audio and speaker connections are made, connect the AC power supply cord to the AC INPUT (120V~60Hz 2.5A) on the rear panel and then to a standard wall outlet.
د انځور تفصیل: This image displays both the front and rear panels of the Sherwood RX-4105 Stereo Receiver. The top portion shows the front panel with controls for power, input selection (FM/AM, CD, TAPE, AUX, PHONO, TONE DIRECT), tuning/preset, memory, tone/balance, and a large volume knob. A digital display shows current settings like "FM 87.50". The bottom portion shows the rear panel, detailing connection ports. From left to right, it includes antenna terminals (AM LOOP, FM 75Ω), various RCA input/output jacks (CD, TV/AUX, TAPE IN/OUT, VCR IN/OUT), speaker terminals (A and B), and the AC power input. Safety warnings and product model information are also visible.
عملیاتي لارښوونې
پاور آن/بند
فشار ورکړئ پر / سټینډبای switch on the front panel to turn the receiver on or off. The تيارسئ indicator will illuminate when the unit is in standby mode.
د داخلولو انتخاب
Press the desired input button (FM/AM, CD, ټاپي, AUX, فونو, TONE DIRECT) on the front panel to select your audio source.
د حجم کنټرول
لوی وګرځوئ حجم knob on the right side of the front panel to adjust the sound level. The digital display will show the current volume setting. The receiver includes a safety feature that may shut down the system if the volume is set too high or if the unit overheats, preventing damage.
Tone and Balance Controls
د کارولو ټون (Bass/Treble) and بیلانس controls to fine-tune the audio output to your preference. The TONE DIRECT button bypasses these controls for a pure audio signal.
د تونر عملیات (FM/AM)
- مطبوعاتي FM/AM to select the desired band.
- د کارولو ټونینګ/پریسیټ buttons (up/down arrows) to manually tune to a station or cycle through preset stations.
- To store a station as a preset, tune to the station, then press MEMORY T/P MODE. د کارولو ټونینګ/پریسیټ arrows to select a preset number, and press MEMORY T/P MODE again to confirm. The receiver supports 30 station presets.
- The built-in AM/FM tuner features auto station setup for convenience.
هیډفون جیک
هیډفونونه سره وصل کړئ تلیفونونه jack on the front panel for private listening. When headphones are connected, speaker output will be muted.
د سپیکر بدلول
د کارولو A SPEAKER B buttons on the front panel to switch between Speaker A, Speaker B, or both (A+B) outputs.
ساتنه
To ensure the longevity and optimal performance of your Sherwood RX-4105 receiver, follow these maintenance guidelines:
- پاکول: د ریسیور بهرنۍ برخه د پاکولو لپاره نرم، وچ ټوکر وکاروئ. د مایع پاکوونکو یا ایروسول سپرې څخه کار مه اخلئ، ځکه چې دوی ممکن پای یا داخلي برخو ته زیان ورسوي.
- وینټیلیشن: ډاډ ترلاسه کړئ چې د ریسیور په پورتنۍ او اړخونو کې د هوا د جریان خلاصې بندې نه وي. د ډیر تودوخې مخنیوي لپاره مناسب هوا جریان خورا مهم دی.
- اړیکې: په دوره یي ډول د کیبل ټولې اړیکې وګورئ ترڅو ډاډ ترلاسه شي چې دوی خوندي او له زنګ څخه پاک دي.
- ذخیره کول: If storing the receiver for an extended period, disconnect it from power and cover it to protect against dust.
د ستونزو حل کول
If you experience issues with your receiver, consult the following table for common problems and their solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| هیڅ ځواک نشته | د برېښنا تار په خوندي ډول نه دی تړل شوی؛ د برېښنا رسۍ فعاله نه ده. | د بریښنا د تار اتصال وګورئ؛ د بل وسیلې سره آوټ لیټ ازموینه وکړئ. |
| د سپیکرو څخه هیڅ غږ نشته | Incorrect input selected; Speaker wires loose or incorrectly connected; Speaker A/B not selected; Volume too low. | Select correct input; Check all speaker wire connections and polarity; Ensure Speaker A or B (or A+B) is selected; Increase volume. |
| د راډیو ضعیف استقبال | Antenna not connected or poorly positioned; Interference from other electronics. | Connect and adjust antenna position; Move receiver away from other electronic devices. |
| ریموټ کنټرول کار نه کوي | بیټرۍ مړه شوي یا په غلط ډول داخل شوي دي؛ د ریموټ او ریسیور ترمنځ خنډ. | Replace batteries, check polarity; Remove any obstructions. |
| Receiver shuts down unexpectedly | Overheating due to poor ventilation; Speaker impedance too low; Volume too high. | Ensure proper ventilation; Check speaker impedance compatibility; Reduce volume. |
مشخصات
| د ماډل شمیره | RX-4105 |
| د تولید بریښنا | 100 Watts RMS per channel x 2 |
| چینلونه | 2-چینل سټیریو |
| د تعدد ځواب | 20-20,000Hz |
| تحریف | له 0.08٪ څخه کم |
| تونر | AM/FM with 30 station presets |
| د سپیکر محصولات | A and B clip-type speaker outputs |
| هیډفون جیک | 0.25 انچه (6.35mm) |
| ابعاد (W x H x D) | 17-3/8 in x 5-7/16 in x 13 in (440mm x 138mm x 332mm) |
| د توکي وزن | ۲.۴۵ پونډه |
تضمین او ملاتړ
د تضمین معلومات
The Sherwood RX-4105 receiver typically comes with a two-year warranty. Please note that the warranty does not cover misuse of the product. For specific warranty terms and conditions, refer to the warranty card included with your purchase or contact Sherwood customer service.
د پیرودونکي ملاتړ
For technical assistance, service, or further inquiries, please visit the official Sherwood website or contact their customer support line. Keep your purchase receipt and product serial number (located on the rear panel) handy when contacting support.
