د فعالیت وسیله M872 1/2 انچه ډرایو 6-پوائنټ 22mm ژور دیوال اغیز ساکټ لارښود لارښود

پیژندنه

This manual provides essential information for the proper use and maintenance of your Performance Tool M872 1/2-inch Drive 6-Point 22mm Deep Wall Impact Socket. Designed for durability and efficiency, this socket is suitable for various automotive and mechanical applications. Please read these instructions carefully before use.

Image: The Performance Tool M872 22mm Deep Wall Impact Socket, showcasing its robust design and clear size markings.

د محصول ځانګړتیاوې

• قوي او دوامدار: Constructed from high-quality drop-forged chrome vanadium steel for lasting performance and resistance to heavy use.
• Tighter Grip: Features rounded corners that enhance grip on fasteners, minimizing the risk of slipping and rounding off edges.
• اسانه پیژندنه: Equipped with large laser-etched size markings for quick and clear identification, even in low-light conditions.
• څو اړخیز: This 6-point impact socket is designed to accommodate a wide range of fastener types and sizes, making it a valuable addition to any toolkit.
• ښه فعالیت: The 22mm socket size is optimized for various automotive and mechanical tasks, ensuring enhanced efficiency.

Image: A detailed graphic highlighting the 22mm size, 1/2-inch drive, CR-V material, and recessed edges of the socket.

مشخصات

تنظیم او ابتدايي کارول

Removing Packaging (Hang Tabs)

If your socket comes with an anti-theft hang tab, follow these steps to remove it safely:

1. Use cutting pliers to snip the plastic above the "Close/Open" icons on the hang tab. Always wear safety glasses when using tools.
2. Twist the hang tab 90 degrees counterclockwise.
3. Pull the hang tab upwards to remove it from the socket.

Attaching to a Drive Tool

The M872 socket is designed for a 1/2-inch drive system. To attach the socket:

1. Ensure your impact wrench, ratchet, or breaker bar has a 1/2-inch square drive.
2. Align the square opening of the socket with the drive anvil of your tool.
3. Push the socket firmly onto the drive anvil until it clicks into place, indicating a secure connection.

عملیاتي لارښوونې

The Performance Tool M872 22mm Deep Wall Impact Socket is engineered for use with impact tools to loosen or tighten fasteners.

1. سمه اندازه غوره کړئ: Verify that the 22mm socket size matches the fastener you intend to work on. Using the incorrect size can damage both the fastener and the socket.
2. خوندي ضمیمه: Ensure the socket is securely attached to your 1/2-inch drive impact tool.
3. موقعیت: Place the socket squarely onto the fastener head. Ensure full engagement to prevent slippage and rounding.
4. عملیات: Activate your impact tool. For tightening, apply appropriate torque as specified by the fastener manufacturer. For loosening, apply steady power until the fastener breaks free.
5. لومړی خوندیتوب: Always wear appropriate personal protective equipment, including safety glasses and gloves, when operating impact tools.

Image: A mechanic using an impact wrench with a socket to work on a car wheel, demonstrating typical application.

Image: A mechanic using an impact wrench with a socket to access a fastener in a confined space under a vehicle.

ساتنه

Proper maintenance will extend the life and performance of your impact socket.

• پاکول: After each use, wipe the socket clean of any dirt, grease, or debris. A clean cloth is usually sufficient. For stubborn grime, a mild degreaser can be used, followed by thorough drying.
• معاینه: Regularly inspect the socket for any signs of wear, cracks, or damage. Pay close attention to the drive end and the hex opening. Discontinue use if any damage is observed.
• ذخیره کول: Store the socket in a dry environment to prevent rust. Keeping it in a tool tray or box will protect it from impacts and loss.
• غوړول: While not typically required for sockets themselves, ensure the drive anvil of your impact tool is clean and lightly lubricated as per its manufacturer's recommendations.

د ستونزو حل کول

If you encounter issues while using your impact socket, consider the following:

• ساکټ چې فټینګ نه کوي:
  • Double-check that the fastener size is indeed 22mm.
  • Ensure the fastener head is not stripped or damaged, which could prevent proper seating.
• په فاسټینر باندې د ساکټ سلیپ کول:
  • Confirm the socket is fully seated on the fastener.
  • Inspect the socket's hex opening for wear or damage. A worn socket may lose its grip.
  • Ensure the impact tool is operating correctly and providing sufficient, consistent power.
• Socket Not Attaching to Drive Tool:
  • Verify your drive tool has a 1/2-inch square drive.
  • Check for debris or damage in the socket's drive opening or on the tool's drive anvil.

د تضمین معلومات

Performance Tool products are backed by a world-class lifetime warranty. For specific details regarding warranty claims, coverage, and procedures, please refer to the official Performance Tool webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکو ملاتړ سره اړیکه ونیسئ.

ملاتړ

For further assistance, technical questions, or to provide feedback, please visit the official Performance Tool webسایټ یا د دوی د پیرودونکي خدماتو څانګې سره اړیکه ونیسئ.

Visit the Performance Tool Store on Amazon