د LUX Pro PSD111B غیر پروګرام وړ ترموسټاټ کارونکي لارښود

1. پیژندنه

This manual provides comprehensive instructions for the installation, operation, and maintenance of your LUX Pro PSD111B Non-Programmable Thermostat. This device is designed for residential use to control 1 Heat, 1 Cool HVAC systems, offering reliable and straightforward temperature management.

Figure 1: LUX Pro PSD111B Thermostat Front View

2. کلیدي ځانګړتیاوې

• څو اړخیز نصب: Can be installed in either horizontal or vertical orientation.
• ښکاره کول: د اسانه ځانګړتیاوو سره-view backlit display for enhanced readability.
• د بیټرۍ چلول: Operates on 2 included AA alkaline batteries, ensuring reliable power.
• د تودوخې واحدونه: Choose between Fahrenheit or Celsius temperature display options.
• دقیق کنټرول: Adjustable temperature swing settings with 9-step control for accurate temperature management.
• Safety Limits: Offers adjustable high and low temperature limits for customized comfort control.

شکل ۲.۱: د محصول ځانګړتیاوېview

3. د سیسټم مطابقت

The LUX Pro PSD111B thermostat is designed for use with most 24-volt gas, oil, or electric heating and air conditioning systems, gas millivolt heating systems, and single-stagد تودوخې پمپونه. دا د 120 ولټ تودوخې سیسټمونو یا دوه ثانیو سره مطابقت نلريtagد تودوخې پمپونه.

Figure 3: System Compatibility Chart

۲. په بکس کې څه دي؟

Your LUX Pro PSD111B Non-Programmable Thermostat package includes the following items:

• PSD111B Thermostat Unit
• 2 ST screws
• 2 دیوال لنگرونه
• د تار لیبلونه
• د لارښوونې لارښود
• 2 AA الکلین بیټرۍ

شکل ۱۱: شاملې برخې

5. ترتیب او نصب کول

Before beginning installation, ensure the power to your HVAC system is turned off at the circuit breaker to prevent electrical shock or damage to the system.

۴.۱ د ترموسټاټ نصبول

1. Carefully remove your old thermostat. Take a photo of the existing wiring connections for reference.
2. Mount the new thermostat base plate to the wall using the provided screws and anchors. The thermostat can be installed in either horizontal or vertical orientation.
3. Feed wires through the back of the thermostat base and securely mount to the wall with supplied screws and anchors.

شکل ۱: د نصبولو اختیارونه

5.2 د تار لګولو لارښوونې

Refer to the wiring diagrams below for typical hookups. Use the provided wire labels to correctly identify and connect wires from your HVAC system to the corresponding terminals on the thermostat base.

Figure 6: Typical Wiring Diagrams

Figure 7: Detailed Wiring Hookups

5.3 Gas/Electric System Selection

Locate the small switch inside the thermostat unit. Slide the switch to the 'GAS' position for gas heating systems or 'ELEC' for electric heating systems (including heat pumps).

5.4 د بیټرۍ نصب کول

Insert the two AA alkaline batteries into the battery compartment located at the bottom of the thermostat. Ensure correct polarity. Remove any protective tabs if present.

5.5 وروستۍ مجلس

Once wiring and settings are complete, carefully snap the thermostat front cover onto the mounted base plate. Restore power to your HVAC system at the circuit breaker.

6. عملیاتي لارښوونې

The PSD111B is a non-programmable thermostat, offering simple manual control over your home's temperature.

۵.۲ د تودوخې تنظیم کول

Use the UP (▲) and DOWN (▼) arrow buttons on the front of the thermostat to set your desired temperature. The display will show the current room temperature and your set temperature.

Figure 8: Simple and Intuitive Control Panel

۵.۲ د سیسټم حالت انتخاب

Use the SYSTEM switch located on the side of the thermostat to select the operating mode:

• تودوخه: Activates the heating system when the room temperature falls below your set temperature.
• بند: د تودوخې او یخولو سیسټمونه دواړه بندوي.
• ارام: Activates the cooling system when the room temperature rises above your set temperature.

۵.۳ د فین حالت انتخاب

Use the FAN switch located on the side of the thermostat to select the fan operation mode:

• اتو: فین یوازې هغه وخت چلیږي کله چې د تودوخې یا یخولو سیسټم په فعاله توګه کار کوي.
• په: فین په دوامداره توګه چلیږي، پرته له دې چې د تودوخې یا یخولو سیسټم فعال وي.

7. ساتنه

7.1 د بیټرۍ بدلول

When the battery indicator appears on the display, replace the two AA alkaline batteries promptly. Open the battery compartment at the bottom of the thermostat, remove old batteries, and insert new ones, ensuring correct polarity. The thermostat retains settings during battery changes.

7.2 پاکول

د ترموسټاټ بهرنۍ برخه د نرم، ډ سره پاکه کړئamp ټوکر د کثافاتو پاکوونکي یا محلول مه کاروئ.

8. ستونزه حل کول

If your thermostat is not functioning as expected, consider the following:

• نه ښودنه: وګورئ چې بیټرۍ په سمه توګه نصب شوي او کافي چارج لري. که اړتیا وي نو بدل یې کړئ.
• سیسټم ځواب نه ورکوي: Ensure the SYSTEM switch is set to HEAT or COOL, not OFF. Verify the fan switch is in the desired position (AUTO or ON). Check your circuit breaker for the HVAC system.
• د تودوخې ناسم لوستل: Allow the thermostat to acclimate to the room temperature for at least 15 minutes after installation or significant temperature changes.
• Heating/Cooling Cycles Too Frequently/Infrequently: Adjust the temperature swing settings (9-step control) to fine-tune the cycle frequency.

9. مشخصات

10. تضمین او ملاتړ

The LUX Pro PSD111B Non-Programmable Thermostat comes with a 5-year limited warranty. For support or warranty claims, please refer to the contact information provided in your owner's manual or visit the official LUX webسایټ