1. پیژندنه
This manual provides instructions for the safe and effective use of the Performance Tool W233 12-Inch Long Reach Extension Scraper. This tool is designed for removing various materials from hard-to-reach surfaces, utilizing both plastic and carbon steel razor blades.
2. د خوندیتوب معلومات
خبرداری: تیغونه خورا تیز دي. د ټپي کیدو مخنیوي لپاره په خورا احتیاط سره یې سمبال کړئ.
- Always wear appropriate personal protective equipment, including safety glasses and gloves, when handling blades and operating the scraper.
- د ماشومانو د لاسرسي څخه لرې وساتئ.
- Ensure the blade is securely fastened before use.
- Do not apply excessive force, which could cause the blade to break or slip.
- Scrape away from your body and other people.
- Dispose of used blades safely in a puncture-resistant container.
3. د بسته محتويات
ډاډ ترلاسه کړئ چې ټول توکي شتون لري:
- 1 x Performance Tool W233 12-Inch Long Reach Extension Scraper
- 3 x Double-edged plastic razor scraper blades
- 3 x Carbon steel razor scraper blades
4. Setup: Blade Installation
- Unscrew the retaining screw: Locate the small screw on the scraper head that holds the blade in place. Use a suitable screwdriver (not included) to loosen and remove this screw.
- Insert the desired blade: Carefully slide either a plastic or carbon steel blade into the slot on the scraper head. Ensure the blade is centered and flush against the internal stop.
- Secure the blade: Reinsert the retaining screw and tighten it firmly. Do not overtighten, but ensure the blade is held securely and does not wobble.
Blade Type Selection:
- پلاستيکي تیغونه: Ideal for delicate surfaces where scratching is a concern, such as painted surfaces, plastic, or glass (e.g., removing stickers from windshields).
- Carbon Steel Blades: Suitable for tougher materials and surfaces that can withstand a more aggressive scrape, such as dried paint, caulk, or heavy residue on metal or concrete.
5. عملیاتي لارښوونې
The 12-inch long reach design allows access to confined spaces. Always test on an inconspicuous area first if unsure about surface compatibility.
- سطح چمتو کړئ: For best results, ensure the surface is clean of loose debris. For some stubborn materials, applying a softening agent (e.g., solvent, water, heat) may aid removal.
- Position the scraper: Hold the scraper firmly. Position the blade at a shallow angle (typically 15-30 degrees) to the surface you are scraping. A shallower angle generally provides more control and reduces the risk of gouging.
- Apply even pressure: Apply steady, even pressure as you push or pull the scraper across the material to be removed. Avoid jerky movements.
- په برخو کې کار: For larger areas, work in small, manageable sections.
- Clean as you go: Periodically remove scraped material to maintain visibility and prevent re-adhesion.
6. ساتنه
- پاکول: After each use, wipe the scraper handle and head clean with a damp cloth. Ensure no residue remains on the blade or in the blade slot.
- د تیغ بدلول: Replace blades when they become dull or damaged. Dull blades require more force and increase the risk of injury or surface damage. Follow the "Blade Installation" steps in Section 4 to replace blades.
- د تیغ ذخیره: The scraper handle is designed with internal storage for extra blades. Unscrew the end cap of the handle to access this compartment. Store unused blades safely within the handle.
- ذخیره کول: Store the scraper in a dry place, away from moisture and corrosive materials. Ensure a blade is either safely stored in the handle or removed from the head before storing the tool.
7. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Blade slips or wobbles | Retaining screw is loose; blade not seated correctly. | Tighten the retaining screw. Re-seat the blade, ensuring it is flush. |
| Ineffective scraping | Dull blade; incorrect blade type for material; insufficient pressure or angle. | Replace the blade. Use a carbon steel blade for tougher materials. Adjust pressure and scraping angle. |
| Surface scratching | Using carbon steel blade on delicate surface; excessive force; incorrect angle. | Use a plastic blade for delicate surfaces. Reduce force. Adjust scraping angle to be shallower. |
8. مشخصات
- ماډل: W233
- ټولیز اوږدوالی: 12 انچه
- Blade Types Included: Double-edged plastic razor blades (3 pcs), Carbon steel razor blades (3 pcs)
- د تیغ ذخیره: Integrated into handle
- جوړونکی: د فعالیت وسیله
9. تضمین او ملاتړ
This Performance Tool product is backed by a د ټول عمر تضمین. For warranty claims, technical support, or replacement parts, please contact Performance Tool customer service directly. Refer to the official Performance Tool webد اړیکو د تازه معلوماتو لپاره سایټ یا د محصول بسته بندي.
تاسو کولی شئ لیدنه وکړئ Performance Tool Store on Amazon د دوی د محصول لړۍ په اړه د نورو معلوماتو لپاره.
