LENOX Bi-Metal Speed Slot Hole Saw with T3 Technology, 1-3/4-Inch

پیژندنه

This manual provides essential information for the safe and effective use of your LENOX Bi-Metal Speed Slot Hole Saw with T3 Technology, 1-3/4-Inch. Please read these instructions thoroughly before operation to ensure proper performance and user safety. This hole saw is designed for cutting various materials, including wood and metal, offering enhanced durability and cutting efficiency.

د خوندیتوب معلومات

Always observe the following safety precautions when using the hole saw:

• مناسب شخصي محافظتي تجهیزات (PPE) واغوندئ, including safety glasses, gloves, and hearing protection.
• ډاډ ترلاسه کړئ چې ورک پیس په خوندي ډول cl دیampد پرې کولو پرمهال د حرکت مخنیوي لپاره ایډ.
• Always use the correct arbor for your hole saw size and drill type.
• Do not exceed the maximum recommended RPM for the hole saw and material being cut. Refer to your drill's manual for speed settings.
• Keep hands and loose clothing away from the rotating saw.
• د لوازمو بدلولو یا ساتنې ترسره کولو دمخه د بریښنا وسیله د بریښنا سرچینې څخه جلا کړئ.
• Avoid applying excessive force, which can cause the saw to bind or break.
• Clear chips and debris regularly, especially when cutting deep holes, to prevent overheating and binding.

اجزا

The LENOX Bi-Metal Speed Slot Hole Saw consists of the following primary components:

• Hole Saw Body: The main cylindrical cutting component with teeth.
• Bi-Metal Teeth: Designed for durability and efficient cutting in various materials.
• Speed Slot: A staircase-shaped slot for easy plug ejection.
• Arbor Connection: The threaded base for attaching to a compatible arbor (sold separately).

Image: The LENOX Bi-Metal Speed Slot Hole Saw, 1-3/4-Inch, showcasing its design and cutting teeth.

چمتو کول

Follow these steps to properly set up your hole saw:

1. Select the Correct Arbor: Choose an arbor compatible with your hole saw size and power drill. Ensure the pilot drill bit is sharp and securely fastened in the arbor.
2. Attach Hole Saw to Arbor: Thread the hole saw onto the arbor until it is hand-tight. Some arbors may require a wrench for final tightening. Ensure it is secure to prevent wobbling during operation.
3. Insert Arbor into Drill: Open the chuck of your power drill and insert the arbor shaft. Tighten the chuck firmly to prevent the arbor from slipping.
4. امنیت تایید کړئ: Before starting, gently tug on the hole saw to ensure it is securely attached to both the arbor and the drill.

Image: A LENOX hole saw securely attached to a drill, highlighting its robust construction and readiness for use.

عملیاتي لارښوونې

Proper operation ensures efficient cutting and extends the life of your hole saw.

General Cutting Procedure:

1. Mark the Center: Clearly mark the center point for your desired hole on the workpiece.
2. د پیلوټ بټ ځای په ځای کړئ: Place the pilot drill bit directly on the marked center.
3. ورو پیل وکړئ: Begin drilling at a slow speed to allow the pilot bit to penetrate and the hole saw teeth to engage the material.
4. سرعت زیات کړئ (که مناسب وي): Once the hole saw is stable and cutting, gradually increase the drill speed. Maintain consistent pressure.
5. پاک چپس: For deeper cuts, periodically withdraw the saw to clear chips and allow the saw to cool. This is especially important for metal cutting.
6. پرې کول بشپړ کړئ: Continue drilling until the hole is fully cut through the material.

Cutting Metal:

When cutting metal, use a lower RPM and apply cutting fluid to reduce heat and extend saw life. The T3 Technology and optimized tooth design are specifically engineered for efficient metal penetration.

Image: A LENOX hole saw actively cutting through a metal pipe, illustrating the effectiveness of T3 Technology for metal applications.

Image: The LENOX hole saw engaged in cutting metal, demonstrating its durability during demanding tasks.

Image: A close-up of the LENOX hole saw's optimized tooth design as it penetrates metal, ensuring clean and efficient cuts.

د لرګیو پرې کول:

For wood, a higher RPM can generally be used. The larger, sharper teeth facilitate fast and efficient cutting through various wood types, including two-by lumber.

Image: A LENOX hole saw cutting through a wooden beam, showcasing its larger, sharper teeth designed for fast and efficient wood cutting.

Plug Ejection (Speed Slot):

The unique Speed Slot design allows for easy removal of cut material plugs. After completing a cut, use a screwdriver or similar tool to leverage the plug out through the wide staircase slot. This prevents plugs from becoming stuck and speeds up your work.

Image: A visual demonstration of the LENOX Speed Slot design, illustrating how a screwdriver can be used to easily eject a cut plug from the hole saw.

ساتنه

Regular maintenance ensures optimal performance and longevity of your hole saw.

• پاکول: After each use, clean the hole saw to remove any accumulated debris, chips, or residue. A wire brush can be effective for cleaning the teeth.
• معاینه: Periodically inspect the teeth for wear, damage, or missing segments. A dull or damaged saw can lead to inefficient cutting and potential safety hazards.
• غوړول: For metal cutting, ensure adequate lubrication is used during operation.
• ذخیره کول: Store the hole saw in a dry place to prevent rust. Consider using a protective case or organizer to prevent damage to the teeth.

د ستونزو حل کول

د عامو ستونزو او د هغوی د حل لارو لپاره دې برخې ته مراجعه وکړئ.

مشخصات

• نښه: لینوکس
• د ماډل شمیره: 1771967
• سټایل: ۴-۱/۲ انچه
• مواد: Bi-Metal (Metal)
• د محصول ابعاد: ۴.۴"لیتر x ۲.۲"واټه
• د توکي وزن: 3.59 اونس
• شاملې برخې: Hole Saw (Arbor sold separately)
• UPC: 885363002256، 082472121735

تضمین او ملاتړ

LENOX products are manufactured to high-quality standards. For information regarding product warranty, please refer to the official LENOX webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکو ملاتړ سره اړیکه ونیسئ. د پیرود ثبوت په توګه د پیرود رسید وساتئ.

For technical assistance or further inquiries, please visit the Lenox Store on Amazon or the official LENOX webسایټ