پیژندنه
This manual provides detailed instructions for the setup, operation, and maintenance of your Casio PQ-30B-1EF Alarm Clock. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your device.
ځانګړتیاوې
- Case / bezel material: Resin, ensuring durability and a lightweight design.
- LED څراغ: Provides illumination for easy viewپه کم رڼا شرایطو کې.
- Beeper sound alarm: A clear and effective alarm sound to wake you up.
- د سنوش فعالیت: Allows for temporary silencing of the alarm for a few extra minutes of rest.
- 12/24-hour format: د کارونکي لخوا د انتخاب وړ وخت ښودلو بڼه.
- دقت: Approximately ±60 seconds per month.
- Approx. battery life: 12 months on LR44×2 batteries.
- د تړون اندازه: Dimensions of 57 × 55 × 15 mm and a total weight of 35 g, making it ideal for travel.
چمتو کول
د بیټرۍ نصب کول
The Casio PQ-30B-1EF Alarm Clock requires two LR44 batteries for operation. These batteries are typically included with the product, often packaged separately within the box.
- د الارم ساعت په شا کې د بیټرۍ د برخې پوښ ومومئ.
- Using a small screwdriver or a coin, carefully open the battery compartment cover.
- Insert the two LR44 batteries, ensuring the positive (+) and negative (-) terminals are aligned correctly as indicated inside the compartment.
- د بیټرۍ کمپارټ پوښ بدل کړئ او خوندي یې کړئ.
شکل 1: شاته view of the alarm clock, illustrating the battery compartment and its cover. Ensure correct battery polarity when inserting.
د ابتدايي وخت ترتیب
After installing the batteries, the display will activate. You will need to set the current time.
شکل 2: مخکی view of the alarm clock, highlighting the display and control buttons for time and alarm settings.
- Locate the mode switch on the front panel. It typically has positions like "NORM", "TM SET", and "AL SET".
- Slide the mode switch to the "TM SET" position. The hour digits on the display will begin to flash.
- Press the "HR" button repeatedly to advance the hour. Pay attention to the AM/PM indicator if using 12-hour format.
- Press the "MIN" button repeatedly to advance the minute.
- Once the correct time is set, slide the mode switch back to the "NORM" position to save the time and return to normal display mode.
عملیاتي لارښوونې
د الارم وخت تنظیم کول
- Slide the mode switch to the "AL SET" position. The alarm hour digits will flash.
- Press the "HR" button to set the desired alarm hour.
- Press the "MIN" button to set the desired alarm minute.
- Slide the mode switch back to the "NORM" position to save the alarm time.
د الارم فعالول/غیر فعالول
To turn the alarm on or off, use the "AL ON / AL OFF" switch, typically located near the mode switch.
- Slide the switch to "AL ON" to activate the alarm. An alarm indicator (e.g., a bell icon) will appear on the display.
- Slide the switch to "AL OFF" to deactivate the alarm. The alarm indicator will disappear.
د Snooze/Light Function کارول
The large "SNOOZE/LIGHT" button at the top of the clock serves two purposes:
- رڼا: Press this button briefly at any time to illuminate the display for a few seconds.
- سنوز: When the alarm is sounding, press this button to temporarily stop the alarm. The alarm will sound again after a few minutes (typically 5-10 minutes, depending on the model).
To stop the alarm completely after it sounds (without snoozing), slide the "AL ON / AL OFF" switch to "AL OFF" or change the mode switch to "TM SET" or "AL SET" and then back to "NORM".
Changing 12/24-Hour Format
To switch between 12-hour (with AM/PM indicator) and 24-hour (military time) display formats, press the "12HR/24HR" button, usually located on the front panel.
شکل 3: اړخ view of the alarm clock, demonstrating its compact design and the integrated foldable stand for easy placement.
ساتنه
پاکول
To clean the alarm clock, wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the casing and electronic components. Avoid exposing the clock to excessive moisture.
د بیټرۍ بدلول
When the display becomes dim or the alarm sound weakens, it is time to replace the batteries. Follow the "Battery Installation" steps outlined in the Setup section. Always replace both LR44 batteries at the same time with new ones. Dispose of old batteries according to local regulations.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| ښودنه خالي یا تیاره ده. | بیټرۍ مړه یا ټیټې دي. | Replace both LR44 batteries. Ensure correct polarity. |
| الارم نه غږېږي. | Alarm is not activated, or alarm volume is too low (if adjustable). | Ensure the "AL ON / AL OFF" switch is set to "AL ON". Check battery level. This model has a fixed volume. |
| وخت غلط دی. | Time was not set correctly, or batteries were removed/replaced. | Reset the time following the "Initial Time Setting" instructions. |
| تڼۍ بې ځوابه دي. | Low battery power or temporary malfunction. | Replace batteries. If problem persists, try removing batteries for a few minutes and reinserting them to reset the device. |
مشخصات
| فیچر | تفصیل |
|---|---|
| د ماډل شمیره | PQ-30B-1EF |
| برانډ | کاسیو |
| مواد | Resin (Case/Bezel), Plastic |
| د محصول ابعاد | 57 × 55 × 15 mm (approx. 0.99 x 0.99 x 0.99 cm) |
| ټول وزن | 35 g (approx. 33.4 g) |
| بیټرۍ ته اړتیا ده | ۱ x LR۴۴ (شامل دی) |
| د بیټرۍ ژوند تقریبا | 12 میاشتې |
| دقت | په میاشت کې ± 60 ثانیې |
| ځانګړتیاوې | LED light, Beeper alarm, Snooze function, 12/24-hour format |
تضمین او ملاتړ
د تضمین پوښښ، تخنیکي ملاتړ، یا خدماتو په اړه د معلوماتو لپاره، مهرباني وکړئ د خپل محصول سره شامل شوي تضمین کارت ته مراجعه وکړئ یا رسمي کاسیو ته مراجعه وکړئ. webسایټ. تاسو کولی شئ نور معلومات په په ایمیزون کې د کاسیو پلورنځی or the main Casio support portal.
مهرباني وکړئ د هر ډول تضمین ادعا لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.
