د ټربو ټارچ PL-8ADLX-MC هوا اسیتیلین مشعل کټ کارونکي لارښود

1. پیژندنه

This manual provides essential information for the safe and effective operation, setup, and maintenance of your TurboTorch PL-8ADLX-MC Air Acetylene Torch Kit. Please read this manual thoroughly before using the product to ensure proper handling and to prevent injury or damage.

The TurboTorch 0386-0834 PL-8ADLX-MC Torch Kit is designed for high-capacity and HVAC applications, delivering high heat rapidly to reduce brazing time and fuel consumption. It is an air acetylene kit suitable for use with MC tanks.

۱.۱. د خوندیتوب مهم معلومات

خبرداری: د دې خوندیتوب لارښوونو په تعقیب کې پاتې راتلل ممکن د جدي ټپي کیدو، مړینې یا ملکیت زیان لامل شي.

• Always wear appropriate personal protective equipment (PPE), including safety glasses or face shield, gloves, and protective clothing.
• د کار په ساحه کې د مناسب هوا ورکولو ډاډ ترلاسه کړئ ترڅو د خطرناکو بخاراتو راټولیدو مخه ونیول شي.
• Never use the torch near flammable materials or in explosive atmospheres.
• Inspect all components for damage before each use. Do not use damaged equipment.
• Ensure all connections are tight and leak-free before igniting the torch.
• د اور وژنې وسیله په اسانۍ سره وساتئ.
• Store acetylene cylinders upright in a well-ventilated area, away from heat sources and ignition sources.
• Do not modify the torch kit or its components. Use only genuine replacement parts.
• Refer to local regulations and safety standards for welding and brazing operations.

3. د بسته محتويات

The TurboTorch PL-8ADLX-MC Torch Kit includes the following components:

Image 1: The TurboTorch PL-8ADLX-MC Torch Kit, showing the hose, regulator, handle, and tip within its retail packaging.

• AR-MC (CGA 200) Regulator
• G-4 لاسي
• AH-12 Hose
• PL-8A Tip
• Gauge Guards
• Cylinder Wrench
• د لارښود لارښود (دا سند)

۴. د تنظیم لارښوونې

1. د کار ساحه چمتو کړئ: Ensure the work area is clean, well-ventilated, and free of flammable materials.
2. Connect the Regulator: Attach the AR-MC (CGA 200) regulator to the MC acetylene tank. Use the provided cylinder wrench to tighten the connection securely. Ensure the gauge guards are properly positioned.
3. نلی سره نښلول: Connect one end of the AH-12 hose to the regulator outlet and the other end to the G-4 handle. Tighten all connections firmly.
4. لارښوونه ضمیمه کړئ: Securely attach the PL-8A tip to the G-4 handle. This kit features quick-disconnect handles and tips for ease of assembly.
5. د لیکونو لپاره چیک کړئ: Before opening the acetylene cylinder valve, apply a leak detection solution (e.g., soapy water) to all connections. Slowly open the acetylene cylinder valve. If bubbles appear, close the valve immediately and re-tighten the connection. Repeat until no leaks are detected.
6. Adjust Regulator: With the cylinder valve open, slowly open the torch handle valve slightly to purge air from the hose, then close it. Adjust the regulator to the desired working pressure according to your application requirements.

5. عملیاتي لارښوونې

5.1 Lighting the Torch

1. ډاډ ترلاسه کړئ چې ټول خوندیتوب احتیاطي تدابیر نیول شوي.
2. Slowly open the acetylene valve on the torch handle.
3. The torch is self-lighting. The gas flow will automatically ignite upon opening the valve.
4. Adjust the acetylene flow at the torch handle to achieve the desired flame size and intensity. The PL-8A tip is designed for a swirl flame, providing high heat.

5.2 Shutting Down the Torch

1. Close the acetylene valve on the torch handle.
2. Close the main valve on the acetylene cylinder.
3. Open the torch handle valve briefly to bleed any remaining gas from the hose and regulator, then close it.
4. Turn the regulator adjusting screw counter-clockwise until it is loose, relieving pressure from the regulator.

6. ساتنه

• منظم معاینه: Periodically inspect the hose for cuts, abrasions, or leaks. Check the torch handle, tips, and regulator for any signs of damage or wear.
• د پاکولو لارښوونه: If the flame becomes erratic or blocked, clean the torch tip using appropriate tip cleaners. Do not use hard objects that could damage the tip orifice.
• د لیک چکونه: Perform leak checks regularly, especially after changing cylinders or reassembling components.
• ذخیره کول: Store the torch kit in a clean, dry place, away from extreme temperatures and direct sunlight. Disconnect the regulator from the cylinder when not in use for extended periods.
• د او- حلقې: The kit features color-coded "O" rings for quick gas identification. Inspect these for wear and replace if necessary to maintain a proper seal.

7. ستونزه حل کول

8. مشخصات

• د ماډل شمیره: 0386-0834
• د محصول ابعاد: 12 x 12 x 4 انچه
• د توکي وزن: ۲.۴۵ پونډه
• مواد: پیتل
• رنګ: سور
• نښه: ESAB (TurboTorch)
• د ګاز ډول: Air Acetylene
• Tank Compatibility: MC tank
• تنظیم کوونکی: AR-MC (CGA 200)
• د لارښوونې ډول: Swirl (PL-8A)
• Soft Solders Capacity: تر 2 انچو پورې
• Silver Brazes Capacity: Up to 1 inch

9. تضمین او ملاتړ

For specific warranty information, please refer to the documentation provided with your purchase or contact ESAB customer support. This product is manufactured by Victor, a brand under ESAB.

If you encounter any issues not covered in the troubleshooting section or require technical assistance, please contact the manufacturer's customer service department. Keep your purchase receipt and model number (0386-0834) handy when contacting support.

Protection plans may be available for purchase separately. For details, please refer to your retailer or the product listing page.