Sealey SA621 Drill 13mm Ø - Instruction Manual

1. محصول ختم شوview

The Sealey SA621 is a robust 13mm Ø air drill designed for professional and demanding applications. It features a composite lightweight moulded housing that reduces the effects of chill on the operator's hands, enhancing comfort during prolonged use. The drill is fully reversible with a convenient thumb control located above the motor housing, allowing for easy direction changes. Its air motor is equipped with quality bearings, ensuring smooth and powerful operation. A built-in muffler in the handle exhaust helps to reduce noise levels, contributing to a quieter working environment. The drill is fitted with a Jacobs keyless chuck, enabling fast and efficient bit changes.

شکل 1.1: مخکی view of the Sealey SA621 Air Drill, showcasing its ergonomic design, keyless chuck, and auxiliary handle.

2. د خوندیتوب لارښوونې

Always adhere to general workshop safety practices when using this equipment. Ensure that all safety warnings and instructions are read and understood before operating the drill. Failure to do so may result in electric shock, fire, and/or serious injury.

۲. شخصي محافظتي تجهیزات (PPE)

• Always wear approved eye protection (safety glasses or goggles) to protect against flying debris.
• Wear hearing protection (earplugs or earmuffs) to prevent noise-induced hearing loss, especially during prolonged use.
• Wear appropriate work gloves to improve grip and protect hands.
• Do not wear loose clothing, ties, or jewelry that could get caught in moving parts. Tie back long hair.

2.2. Air Supply Safety

• Ensure the air supply is clean and dry. Moisture in the air line can damage the tool.
• Do not exceed the maximum recommended air pressure for the tool (refer to specifications).
• تل د لوازمو بدلولو، ساتنې ترسره کولو، یا کله چې وسیله په کار نه وي، د هوا رسولو قطع کړئ.
• Never point the air tool or air hose at yourself or others.

2.3. د کار ساحې خوندیتوب

• د کار ساحه پاکه، ښه روښانه او له ګډوډۍ څخه پاک وساتئ.
• د هوا مناسبه هوا ورکول ډاډمن کړئ، په ځانګړې توګه کله چې د هغو موادو سره کار کوئ چې دوړې یا بخار تولیدوي.
• Secure the workpiece firmly to prevent movement during drilling.

3. د بسته محتويات

د بسته بندۍ د پرانیستلو پر مهال، مهرباني وکړئ ډاډ ترلاسه کړئ چې ټولې برخې شتون لري او زیانمنې شوې نه دي. که کوم توکي ورک یا زیانمن شوي وي، سمدلاسه خپل عرضه کوونکي سره اړیکه ونیسئ.

• 1 x Sealey SA621 Air Drill with 13mm Keyless Chuck

4. ترتیب کول

۱. د هوا رسولو سره نښلول

1. Ensure your air compressor is capable of providing the required air pressure and volume (refer to specifications).
2. Connect a suitable air hose (minimum 3/8" I.D.) to the air inlet of the drill. It is recommended to use an in-line air filter/lubricator unit to ensure clean, lubricated air supply.
3. Secure all connections to prevent air leaks.
4. Set the air compressor regulator to the recommended operating pressure.

4.2. Installing Drill Bits (Keyless Chuck)

1. Ensure the air supply is disconnected from the drill.
2. د چک کالر د ساعت په مقابل لوري وګرځوئ ترڅو د چک ژامې خلاصې کړئ.
3. د ډرل بټ په بشپړه توګه په چک کې دننه کړئ، ډاډ ترلاسه کړئ چې دا په مرکز کې دی.
4. Rotate the chuck collar clockwise to tighten the jaws firmly around the drill bit. Hand-tighten only; do not use tools to overtighten.
5. Verify the bit is securely held before reconnecting the air supply.

شکل 4.1: اړخ view of the Sealey SA621 Air Drill, showing the auxiliary handle attachment point and the keyless chuck.

5. عملیاتي لارښوونې

5.1. پیل او ودرول

• To start the drill, depress the trigger. The speed is controlled by the amount of trigger depression.
• د ډرل د بندولو لپاره، ټریګر خوشې کړئ.

5.2. Reversible Function

The drill features a reversible function for driving screws or extracting bits. The direction control is a thumb switch located above the motor housing.

• سویچ د مخکینۍ (ساعت په لور) څرخولو لپاره کیڼ اړخ ته فشار ورکړئ.
• د بیرته (د ساعت په مقابل کې) ګرځیدو لپاره سویچ ښي خوا ته فشار ورکړئ.
• Always ensure the drill has come to a complete stop before changing the direction of rotation.

۳. د برمه کولو تخنیکونه

• Always apply steady, even pressure. Do not force the drill, allow the tool to do the work.
• For drilling into metal, use a center punch to mark the drilling point to prevent the bit from wandering.
• Use appropriate drill bits for the material being drilled.
• Clear chips regularly, especially when drilling deep holes, to prevent overheating and binding.
• When drilling through thin materials, place a scrap piece of wood underneath to prevent splintering or tearing.

Figure 5.1: The Sealey SA621 Air Drill in operation, demonstrating its use for precision drilling in automotive applications.

شکل 5.2: بل view of the Sealey SA621 Air Drill being used on a vehicle panel, highlighting its maneuverability.

6. ساتنه

Regular maintenance ensures the longevity and optimal performance of your Sealey SA621 Air Drill. Always disconnect the air supply before performing any maintenance.

6.1. غوړول

• Air tools require regular lubrication. Add a few drops of good quality air tool oil into the air inlet before and after each use, or if the tool is stored for an extended period.
• If using an in-line lubricator, ensure it is filled with air tool oil and adjusted correctly.

6.2. پاکول او ذخیره کول

• Clean the exterior of the drill with a damp ټوکر سخت محلول مه کاروئ.
• Store the drill in a dry, secure location, away from direct sunlight and extreme temperatures.
• If storing for an extended period, apply a light coat of oil to metal parts to prevent corrosion.

۳. د چک ساتنه

• Periodically inspect the chuck jaws for wear or damage. Replace if necessary.
• د چک ژامې پاکې او له کثافاتو څخه پاک وساتئ ترڅو د ډرل بټونو سمه گرفت ډاډمن شي.

7. ستونزه حل کول

This section addresses common issues you might encounter with your Sealey SA621 Air Drill. For problems not listed here, contact qualified service personnel.

8. مشخصات

The following table provides the technical specifications for the Sealey SA621 Air Drill.

9. تضمین او ملاتړ

Sealey products are manufactured to high standards and, subject to proper use and maintenance, will give years of trouble-free performance. This product is covered by a manufacturer's warranty.

9.1. د تضمین معلومات

The EU Spare Part Availability Duration for this product is 1 year. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sealey webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

9.2. د پیرودونکي ملاتړ

For technical assistance, spare parts, or service inquiries, please contact your authorized Sealey dealer or visit the official Sealey website for contact information. When contacting support, please have your product model number (SA621) and serial number (if applicable) ready.