پیژندنه
د پیرودلو لپاره مننهasing the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
د بسته محتويات
- Lexon On/Off 3 Position LCD Alarm Clock (LR98-B)
- د AAA بیټرۍ x 2
- د کارونکي لارښود (دا لاسوند)
محصول پای ته ورسیدview
The Lexon LR98-B is a unique digital alarm clock designed for intuitive use. Its innovative "on/off" mechanism allows you to activate or deactivate the alarm simply by rotating the clock to one of its three positions. The clear LCD display shows the time, and an EL backlight provides visibility in low-light conditions.
This image displays the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B, in its black finish. The clock is shown in an angled position, with the digital display clearly visible, indicating '12:30 PM'. The unique 'on/off' design is evident in its angled structure, where rotating the clock changes its operational state.
چمتو کول
1. د بیټرۍ نصب کول
- د الارم ساعت په شا کې د بیټرۍ د برخې پوښ ومومئ.
- پوښ د سلایډ کولو یا په نرمۍ سره د خلاصولو له لارې لرې کړئ.
- دوه (2) AAA بیټرۍ دننه کړئ، ډاډ ترلاسه کړئ چې سم قطبي (+ او -) لکه څنګه چې د خونې دننه ښودل شوي.
- د بیټرۍ کمپارټ پوښ په خوندي ډول بدل کړئ.
۴. لومړنی بریښنا فعالول
Once batteries are installed, the LCD display should activate. If not, check battery placement or replace with fresh batteries.
عملیاتي لارښوونې
The Lexon LR98-B features a unique "on/off" function controlled by its physical orientation. The clock has buttons on the back for setting time and alarm.
د وخت تنظیم کول
- Locate the time setting buttons on the back of the clock (usually labeled "SET" or "TIME" and "+" / "-").
- د "SET" یا "TIME" تڼۍ فشار ورکړئ او ونیسئ تر هغه چې د ساعت شمیرې روښانه شي.
- Use the "+" and "-" buttons to adjust the hour. Pay attention to the AM/PM indicator if present.
- Press the "SET" or "TIME" button again to move to the minute setting.
- Use the "+" and "-" buttons to adjust the minutes.
- Press "SET" or "TIME" one last time to confirm and exit time setting mode.
د الارم تنظیم کول
- Locate the alarm setting buttons on the back of the clock (usually labeled "ALARM" and "+" / "-").
- د "الارم" تڼۍ فشار ورکړئ او ونیسئ تر هغه چې د الارم ساعت شمیرې فلش پیل نشي.
- Use the "+" and "-" buttons to adjust the alarm hour.
- Press the "ALARM" button again to move to the alarm minute setting.
- Use the "+" and "-" buttons to adjust the alarm minutes.
- Press "ALARM" one last time to confirm and exit alarm setting mode.
Using the On/Off Function
The Lexon LR98-B features a unique physical on/off switch. The clock has three positions:
- Alarm ON Position: When the clock is oriented in a specific way (e.g., with "ON" facing upwards or a designated side), the alarm function is active. A small indicator (e.g., an alarm icon) may appear on the display.
- Alarm OFF Position: When the clock is rotated to another specific orientation (e.g., with "OFF" facing upwards or a different designated side), the alarm function is deactivated. The alarm indicator will disappear from the display.
- Time Display Position: A third position might exist for simply displaying the time without alarm functionality being explicitly on or off, or it might be a neutral position. Refer to the markings on your specific device.
To activate or deactivate the alarm, simply rotate the clock to the desired position. The display will visually confirm the alarm status.
د EL شاليد
To illuminate the display in dark conditions, press the "EL" button located on the back of the clock. The backlight will typically stay on for approximately 3 seconds.
Hourlد وخت سیګنال (چایم)
The clock is equipped with an hourly time signal function. To activate or deactivate this feature, refer to the specific button or combination of buttons on the back of your device, often labeled "CHIME" or integrated with the "SET" button. Consult the markings on your clock for precise control.
ساتنه
- پاکول: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or display.
- د بیټرۍ بدلول: Replace batteries when the display dims or the clock functions become erratic. Always replace both batteries simultaneously with new AAA batteries.
- ذخیره کول: که چیرې ساعت د اوږدې مودې لپاره ذخیره کوئ، نو د لیکیدو مخنیوي لپاره بیټرۍ لرې کړئ.
- چاپیریال: ساعت د سختې تودوخې، مستقیم لمر وړانګو، لوړې رطوبت، یا قوي مقناطیسي ساحو سره د مخ کیدو څخه ډډه وکړئ.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| ښودنه خالي یا تیاره ده. | ټیټ یا مړه بیټرۍ؛ د بیټرۍ ناسم نصب. | Replace batteries with new AAA batteries; ensure correct polarity. |
| الارم نه غږېږي. | Alarm is not set; clock is in "OFF" position; alarm volume is too low (if adjustable). | Ensure alarm time is set correctly; rotate clock to "ON" position; check for volume controls if applicable. |
| وخت غلط دی. | Time was not set correctly; power interruption (if not battery-backed). | د "وخت ټاکل" لارښوونو سره سم وخت بیا تنظیم کړئ. |
مشخصات
- ماډل: LR98-B (Manufacturer Model Number: 2910200 LR98-B)
- نښه: لیکسن
- د ښودلو ډول: ډیجیټل LCD
- د بریښنا سرچینه: 2 x AAA بیټرۍ
- مواد: ABS (Acrylonitrile Butadiene Styrene)
- ابعاد (W x D x H): 5.3 x 1.4 x 3.1 انچه (13.5 x 3.5 x 8 سانتي متره)
- وزن: 0.13 کیلو ګرامه (4.6 اونس)
- ځانګړي ځانګړتیاوې: On/Off 3 Position Function, EL Backlight, Hourlد وخت سیګنال
- د نصب کولو ډول: ټابلیټ
- د اصلي هیواد: چین
تضمین او ملاتړ
Lexon products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Lexon webسایټ. مهرباني وکړئ د هر ډول تضمین ادعا لپاره د پیرود ثبوت وساتئ.
For further assistance, you may contact Lexon customer support through their official channels.
