ګیرا 010600 10600 معیاري سویچ کارونکي لارښود

پیژندنه

This manual provides essential instructions for the safe installation, operation, and maintenance of your Gira 010600 10600 Standard Switch. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for intelligent building technology applications.

د خوندیتوب معلومات

WARNING: Installation must be carried out by a qualified electrician in accordance with national wiring regulations and local safety standards. Always disconnect the main power supply before commencing any electrical work.

• Ensure the power supply is completely off before installation or maintenance.
• په D کې نصب مه کوئamp or wet conditions unless the product is specifically rated for such environments.
• Verify correct wiring connections to prevent electrical hazards.
• This switch is rated for 250V. Do not exceed specified voltage.

تنظیم او نصب کول

The Gira 010600 10600 Standard Switch is designed for flush-mounted installation. Ensure you have the necessary tools and a suitable flush-mounted box.

اجزاوو ختمview

شکل 1: شاته view of the Gira 010600 switch mechanism, showing terminals and mounting points. The transparent housing allows for visual inspection of internal components.

د تار لګولو لارښوونې

Refer to the following diagrams for correct wiring. The Gira 010600 is compatible with Gira 0106 00 devices and supports various switching configurations.

شکل 2: Wiring diagram for a cross switch configuration (Kreuzschalter). This diagram illustrates the connections for AC 230V~, including live (L) and neutral (N) lines, and the lamp connection. This setup is used for controlling a light from three or more locations.

شکل 3: Wiring diagram for a universal switch configuration (Universal Aus-Wechselschalter). This diagram shows connections for AC 230V~ and a lamp, suitable for controlling a light from one or two locations. It includes connections for two 0106 00 switches and one 0107 00 switch, demonstrating a multi-point control setup.

1. د بریښنا قطع کول: Turn off the main power supply at the circuit breaker before starting any work.
2. تارونه چمتو کړئ: Strip approximately 10-12mm of insulation from the ends of the electrical wires.
3. د تارونو نښلول: Following the appropriate wiring diagram (Figure 2 or Figure 3), insert the wires into the corresponding terminals on the switch mechanism. Ensure a secure connection. The switch is designed for 250V operation.
4. د ماونټ سویچ: Carefully place the switch mechanism into the flush-mounted box. Secure it using the screws provided with the box or switch.
5. Attach Cover Plate: Install the decorative cover plate and rocker (not included with the mechanism) onto the switch.
6. د بریښنا بیرته راګرځول: کله چې نصب بشپړ شي او ټولې اړیکې خوندي شي، په سرکټ بریکر کې بریښنا بیرته راوباسئ.

عملیاتي لارښوونې

The Gira 010600 10600 Standard Switch operates as a conventional electrical switch.

1. To turn on the connected electrical device (e.g., a light), press the rocker switch to the 'ON' position.
2. To turn off the connected electrical device, press the rocker switch to the 'OFF' position.

In multi-point switching configurations (e.g., cross switch or universal switch setups), the state of the connected device can be toggled from any connected switch.

ساتنه

The Gira 010600 10600 Standard Switch requires minimal maintenance.

• پاکول: To clean the surface of the switch, gently wipe it with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the transparent material.
• معاینه: په دوره یي ډول د زیان، تړلو نښو یا رنګ بدلولو لپاره سویچ وګورئ. که کومه ستونزه ولیدل شي، بریښنا قطع کړئ او د وړ بریښنایی متخصص سره مشوره وکړئ.
• د کارونکي د خدمت وړ برخې نشته: The internal components of the switch are not user-serviceable. Do not attempt to open or repair the switch mechanism.

د ستونزو حل کول

If you encounter issues with your Gira 010600 10600 Standard Switch, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact a qualified electrician or Gira customer support.

مشخصات

• نښه: ګیره
• د موډل نوم: 10600
• مطابقت لرونکي وسایل: Gira 0106 00
• مواد: فلزي
• د واحدونو شمېر: 1 ټول
• رنګ: شفاف
• والیtage درجه بندي: 250 وی
• جوړونکی: GIRA
• UPC: 740439921339

ملاتړ او تضمین

For technical support or warranty inquiries, please contact your local Gira distributor or visit the official Gira webسایټ. د پیرود ثبوت په توګه د پیرود رسید وساتئ.

Gira is committed to providing intelligent building technology solutions. For more information, visit www.gira.com.