د اینهیل BT-TJ 2250 ټرالي جیک کارونکي لارښود

1. پیژندنه

This manual provides important information for the safe and proper operation, maintenance, and troubleshooting of your Einhell BT-TJ 2250 Trolley Jack. Please read this manual thoroughly before using the product and keep it for future reference.

The Einhell BT-TJ 2250 is a robust and stable trolley jack designed for lifting vehicles with a maximum load capacity of 2250 kg. It features two ball-bearing swivel castors for easy maneuverability, an extra-large support saddle, and a long, two-part lifting rod to ensure safe and easy lifting of loads. An integrated safety valve protects against overloading.

2. د خوندیتوب لارښوونې

تل د محصول د ټپي کیدو یا زیان څخه د مخنیوي لپاره لاندې خوندیتوب احتیاطي تدابیر په پام کې ونیسئ:

• لارښود ولولئ: د عملیاتو دمخه، پدې لارښود کې ټولې لارښوونې او اخطارونه ولولئ او پوه شئ.
• د بارولو ظرفیت: هیڅکله د 2250 کیلوګرام اعظمي بار ظرفیت څخه ډیر مه کوئ.
• باثباته سطحه: Always use the jack on a hard, level, and stable surface.
• د موټرو ملاتړ: After lifting, always support the vehicle with appropriate jack stands before working underneath it. Never rely solely on the jack for support.
• د مرکز بار: Ensure the load is centered on the saddle of the jack.
• پاکه سیمه: Keep hands, feet, and other body parts clear of moving parts and the area under the load.
• ساتنه: Regularly inspect the jack for damage or wear. Do not use if damaged.
• ماشومان او څاروي: ماشومان او څاروي د کاري ساحې څخه لرې وساتئ.
• د اوورلوډ محافظت: The jack is equipped with an overload safety valve. Do not attempt to bypass or adjust this valve.

3. د محصول اجزا

Familiarize yourself with the parts of your Einhell BT-TJ 2250 Trolley Jack:

1. اصلي بدن: The robust steel frame of the jack.
2. د لاس پورته کول: The movable arm that raises the support saddle.
3. Support Saddle: The circular pad at the top of the lifting arm where the load rests. It is extra-large for stability.
4. Swivel Castors: Two ball-bearing wheels at the rear for easy steering and positioning.
5. Fixed Wheels: Two wheels at the front for stability.
6. Lifting Rod (Handle): A two-part rod used to pump the jack and operate the release valve.
7. د خلاصون والو: Located at the base of the lifting mechanism, controlled by rotating the lifting rod.
8. Overload Safety Valve: Internal mechanism to prevent lifting beyond the rated capacity.

4. تنظیم او مجلس

The Einhell BT-TJ 2250 Trolley Jack typically comes pre-assembled, but the lifting rod may need to be attached.

• Attach the Lifting Rod: Insert the two parts of the lifting rod together. Then, insert the assembled rod into the handle socket on the jack. Ensure it is securely seated.
• Bleed Air (First Use): Before first use, it is recommended to bleed any air from the hydraulic system.
  1. Turn the lifting rod counter-clockwise to fully open the release valve.
  2. Pump the lifting rod vigorously several times.
  3. Turn the lifting rod clockwise to close the release valve.

5. عملیاتي لارښوونې

۴.۱. د بار پورته کول

1. موټر چمتو کړئ: موټر په یوه سخته او همواره سطحه ودروئ. د پارکینګ بریک ولګوئ او هغه څرخونه بند کړئ چې په ځمکه پاتې کیږي.
2. د جیک ځای ونیسئ: Locate the vehicle's designated lifting points (refer to your vehicle's owner's manual). Position the jack's support saddle directly under the lifting point.
3. د خوشې کولو والو بند کړئ: Turn the lifting rod clockwise until the release valve is fully closed. Do not overtighten.
4. Lift the Load: Pump the lifting rod up and down to raise the support saddle and lift the vehicle. Continue pumping until the vehicle reaches the desired height.
5. د جیک سټینډونو سره خوندي: Immediately place appropriately rated jack stands under the vehicle's designated support points. Slowly lower the vehicle onto the jack stands by carefully turning the lifting rod counter-clockwise. Once the vehicle is securely resting on the jack stands, remove the trolley jack.

۴.۲. د بار کمول

If the vehicle is on jack stands, first lift it slightly off the stands using the trolley jack before lowering.

1. ساحه پاکه کړئ: Ensure no one is under or near the vehicle.
2. د جیک ځای ونیسئ: If removed, reposition the jack's support saddle under the lifting point.
3. ورو ورو خلاص کړئ خوشې والو: Slowly and carefully turn the lifting rod counter-clockwise to open the release valve. The vehicle will begin to descend. Control the descent speed by adjusting how much you open the valve.
4. Fully Lower: Continue lowering until the vehicle is fully on the ground.
5. جیک لرې کړئ: Once the vehicle is stable on the ground, remove the trolley jack.

6. ساتنه او ذخیره کول

• پاکول: Clean the jack regularly with a damp ټوکر سخت کیمیاوي توکي مه کاروئ.
• غوړول: Periodically lubricate moving parts and pivot points with light machine oil.
• هیدرولیک تیل: Check the hydraulic oil level periodically. If low, refill with a high-quality hydraulic jack oil. Consult a qualified technician if unsure.
• معاینه: Before each use, inspect the jack for any signs of damage, leaks, or wear. Do not use a damaged jack.
• ذخیره کول: Store the jack in a dry, clean place, preferably with the ram fully retracted to protect the hydraulic cylinder.

7. ستونزه حل کول

8. مشخصات

9. تضمین او ملاتړ

For warranty information, please refer to the warranty card included with your product or visit the official Einhell website. For technical support or spare parts, please contact Einhell customer service. Keep your purchase receipt as proof of purchase.

د اینهیل پیرودونکي خدمت: Please refer to the contact details provided on the Einhell official webسایټ یا ستاسو د محصول بسته بندۍ کې.