Geberit Kombifix Öko Basic Concealed Cistern User Manual

1. پیژندنه

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Geberit Kombifix Öko Basic Concealed Cistern, model 110.100.00.1. This product is designed for use with compatible Delta flush plates and offers a dual-flush system for efficient water usage. Please read these instructions carefully before proceeding with installation or use to ensure proper function and longevity of the product.

2. د خوندیتوب معلومات

• Installation should only be performed by qualified plumbing professionals in accordance with local building and plumbing codes.
• ډاډ ترلاسه کړئ چې د نصب یا ساتنې کار پیل کولو دمخه د اوبو رسولو بند دی.
• د نصبولو پرمهال مناسب شخصي محافظتي تجهیزات (PPE) وکاروئ.
• Do not modify the product in any way, as this may void the warranty and compromise safety.
• ټولې کوچنۍ برخې د ماشومانو له لاسرسي لرې وساتئ.

3. ترتیب او نصب کول

The Geberit Kombifix Öko Basic Concealed Cistern is designed for secure installation within a wall structure. Professional installation is highly recommended due to the complexity of concealed systems.

3.1 پیک کول او تفتیش کول

• Carefully unpack all components and verify against the packing list.
• Inspect all parts for any signs of damage. Do not install damaged components.

3.2 Mounting the Cistern Frame

The robust frame must be securely anchored to the wall and floor. Refer to the technical drawing for precise measurements and mounting points.

شکل 1: Geberit Kombifix Öko Basic Concealed Cistern. This image displays the complete concealed cistern unit, including the frame, water tank, and connection points for water supply and waste. The Geberit logo is visible on the front of the tank.

شکل 2: Technical drawing with key dimensions for the Geberit Kombifix Öko Basic Concealed Cistern. This diagram illustrates the precise measurements (in centimeters) required for installation, including width, height, depth, and connection points for water inlet (R1/2) and waste outlet. The overall height is 108 cm, and the width is 42 cm.

۵.۵ د اوبو او فاضله موادو اړیکې

• Connect the water supply to the cistern's inlet valve (R1/2). Ensure all connections are watertight.
• Connect the waste pipe from the toilet bowl to the cistern's outlet.
• Perform a leak test before closing the wall.

3.4 Flush Plate Installation

This cistern is compatible with Geberit Delta flush plates. Follow the specific instructions provided with your Delta flush plate for proper installation and connection to the cistern's flushing mechanism.

4. عملیاتي لارښوونې

The Geberit Kombifix Öko Basic features a dual-flush system, allowing you to choose between a full flush and a partial flush for water conservation.

• بشپړ فلش: Press the larger button on your Delta flush plate for a complete flush cycle.
• جزوي فلش: Press the smaller button on your Delta flush plate for a reduced water volume flush.

Ensure the flush plate is properly installed and aligned for smooth operation of both flush options.

5. ساتنه

Regular maintenance ensures the optimal performance and longevity of your Geberit concealed cistern.

5.1 پاکول

• Clean the flush plate and visible parts with a mild, non-abrasive cleaner and a soft cloth.
• Avoid harsh chemicals, abrasive pads, or solvents, as these can damage the surface finish.

۳.۲ داخلي برخې

• Access to internal components is typically through the flush plate opening.
• Periodically check for any visible leaks or unusual noises during filling or flushing.
• If internal repairs are needed, it is strongly recommended to contact a qualified plumber. Use only genuine Geberit spare parts.

6. ستونزه حل کول

Below are common issues and basic troubleshooting steps. For complex problems, consult a professional plumber.

• Cistern not filling:
  • Check if the main water supply valve to the cistern is open.
  • Inspect the fill valve for obstructions or damage.
• Cistern continuously running:
  • This often indicates an issue with the flush valve seal.
  • Ensure the flush plate is not stuck in a partially pressed position.
  • The fill valve might be set too high, causing water to overflow into the flush pipe.
• Flush plate not activating flush:
  • Verify that the flush plate is correctly installed and its actuators are engaging with the cistern's mechanism.
  • Check for any obstructions behind the flush plate.
• کمزوری فلش:
  • Ensure the water level in the cistern is reaching the correct fill line.
  • Check for partial obstructions in the flush valve or waste pipe.

7. مشخصات

8. تضمین او ملاتړ

For warranty information, please refer to the documentation provided at the time of purchase or contact Geberit directly. For technical support or service, it is recommended to contact a qualified plumbing professional or an authorized Geberit service partner.