1. پیژندنه
د Amprobe LAN-1 LAN Cable Tester is a diagnostic tool designed to identify and trace data cables and connectors. It helps detect common wiring issues such as shorts, miswirings, and open circuits in various cable types. This manual provides detailed instructions for the proper use, setup, and maintenance of your LAN-1 tester.
The LAN-1 evaluates most common cable types, including 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, and Token Ring cables, as well as RJ45 and BNC connectors. It can test cables up to 300 meters long and uses LED indicators and an audible buzzer to signal cable status and errors.
2. د خوندیتوب معلومات
مهرباني وکړئ د کار کولو دمخه د خوندیتوب ټولې لارښوونې ولولئ او پوه شئ Amprobe LAN-1 LAN Cable Tester. Failure to follow these instructions may result in injury or damage to the device.
- که چیرې وسیله خرابه ښکاري یا په سمه توګه کار نه کوي نو مه یې کاروئ.
- ډاډ ترلاسه کړئ چې د نصبولو پرمهال د بیټرۍ سم ډول او قطبي والی کارول کیږي.
- د وسیلې د خورا تودوخې ، رطوبت یا مستقیم لمر وړانګو ته د افشا کولو څخه ډډه وکړئ.
- د وسیلې د ترمیم یا ترمیم هڅه مه کوئ. ټولې خدمتونه وړ پرسونل ته راجع کړئ.
- Always disconnect the cable tester from any active network or power source before performing maintenance or battery replacement.
3. د بسته محتويات
ډاډ ترلاسه کړئ چې لاندې ټول لیست شوي توکي ستاسو په کڅوړه کې شتون لري:
- LAN-1 LAN Cable Tester
- (1) Remote terminator
- (1) RJ45 to female BNC cable
- (1) RJ45 to male BNC cable
- (1) RJ45 to RJ45 cable
- (1) Female BNC to female BNC cable
- (1) 9V battery (installed)
- لارښوونې (دا لارښود)
4. محصول ختم شوview
د Amprobe LAN-1 features a compact design with intuitive controls and clear LED indicators for efficient cable testing.
4.1 کلیدي ځانګړتیاوې
- Cable Testing: Locates and traces data cables and connectors to identify shorts, miswiring, and opens.
- څو اړخیز مطابقت: Evaluates 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, and Token Ring cables, along with RJ45 and BNC connectors.
- د تېروتنې اشاره: An audible buzzer indicates an error condition in the cable.
- پراخ شوی حد: Tests cables up to 300 meters long.
- ښکاره کول: Eighteen red and green LEDs indicate the source or test results.
- د ازموینې طریقې: Supports Loopback Test and Remote Test functions.
- د خوندیتوب اطاعت: CE - EMC certified.
4.2 د اجزاو پیژندنه
شکل 1: مخکی view د Amprobe LAN-1 LAN Cable Tester. This image displays the main unit with its LED pin-out indicator, battery status light, and control buttons including AUTO, MAN, HOLD, TEST, BATT, and the power button.
شکل 2: Amprobe LAN-1 LAN Cable Tester showing the main unit and the remote terminator module. This view highlights how the remote unit connects to the main tester for comprehensive cable testing.
- PIN-OUT INDICATOR LEDs: Displays the wiring status for each pin (1-8) and ground (G).
- د بیټ ایل ای ډي: د بیټرۍ حالت په ګوته کوي.
- د اتومات تڼۍ: Initiates automatic scanning of cable pins.
- MAN Button: Allows manual step-through of cable pins.
- تڼۍ ونیسئ: Pauses the current test result display.
- د ازموینې تڼۍ: Starts a test cycle.
- POWER Button (Yellow): وسیله چالان او بندوي.
- RJ45 بندر: For connecting RJ45 cables.
- BNC Port: For connecting BNC cables.
- Remote Terminator: A separate module used for testing installed cables or long runs.
5. ترتیب کول
5.1 د بیټرۍ نصب کول
The LAN-1 tester is powered by one 9V battery, which is typically pre-installed. If replacement is needed:
- ډاډ ترلاسه کړئ چې وسیله بنده ده.
- د اصلي واحد په شا کې د بیټرۍ د برخې پوښ ومومئ.
- Remove the screw(s) securing the cover and carefully open it.
- Remove the old 9V battery and disconnect it from the terminals.
- Connect a new 9V battery, ensuring correct polarity (+ to + and - to -).
- بیټرۍ په کڅوړه کې واچوئ او پوښ یې بدل کړئ، د سکرو سره یې خوندي کړئ.
The battery provides power for up to 20 hours of testing.
۴.۲ د ازموینې لپاره د کیبلونو نښلول
Before testing, ensure the cable is disconnected from any active network equipment.
- For patch cables (short cables not installed in walls): Connect one end of the cable to the RJ45 or BNC port on the main unit and the other end to the corresponding port on the remote terminator.
- For installed cables (e.g., wall plates, patch panels): Connect one end of the cable to the RJ45 or BNC port on the main unit. Connect the remote terminator to the other end of the installed cable (e.g., at the wall plate in another room).
6. عملیاتي لارښوونې
6.1 بریښنا کول / بندول
ژیړ فشار ورکړئ پاور button to turn the device on. Press it again to turn the device off.
6.2 د ازموینې ترسره کول
Once the cable is connected, you can perform a test:
- فشار ورکړئ ټیسټ button to initiate a cable test.
- Automatic Scan (AUTO mode): فشار ورکړئ آټو button. The tester will automatically scan through each pin (1-8 and G) and display the results sequentially. This is suitable for quick checks.
- Manual Scan (MAN mode): فشار ورکړئ سړی button. Each press of the سړی button will advance the test to the next pin, allowing for a detailed examination of each connection.
- د فعالیت ساتل: فشار ورکړئ هوډ button to pause the current display of the pin-out indicator. Press it again to resume scanning.
۵.۳ د LED شاخصونو تشریح کول
The 18 red and green LEDs on the PIN-OUT INDICATOR provide visual feedback on the cable's status:
- شنه LED: Indicates a correct connection for the corresponding pin.
- سره LED: Indicates an error for the corresponding pin (e.g., open circuit, short circuit, miswiring).
- نه LED: May indicate an open circuit or a broken wire for that pin.
- بزګر: An audible buzzer will sound when an error condition is detected, providing an additional alert.
The LEDs on the remote module will mirror the main unit's display for the corresponding pins, allowing for verification of end-to-end continuity.
6.4 د بیټرۍ حالت چک کول
فشار ورکړئ بیټ button to check the battery level. The BATT LED will illuminate if the battery has sufficient power. If the BATT LED does not light up or is dim, replace the 9V battery.
7. ساتنه
7.1 پاکول
To ensure the longevity and proper functioning of your LAN-1 tester, keep it clean and free from dust and debris.
- د وسیلې بهرنۍ برخه په نرم سره پاک کړئ ، دamp ټوکر د کثافاتو پاکوونکي یا محلول مه کاروئ.
- Ensure no moisture enters the ports or battery compartment.
7.2 د بیټرۍ بدلول
Replace the 9V battery when the BATT LED indicates low power or if the device fails to power on. Refer to Section 5.1 for detailed battery installation instructions.
تل د ځایی مقرراتو سره سم کارول شوي بیټرۍ تصفیه کړئ.
8. ستونزه حل کول
که تاسو د خپلو ستونزو سره مخ شئ Amprobe LAN-1 LAN Cable Tester, refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| وسیله فعاله نه ده. | ټیټ یا مړ بیټرۍ؛ د بیټرۍ ناسم نصب. | د ۱۲ ولټ بیټرۍ بدله کړئ، د سم قطبیت ډاډ ترلاسه کړئ. |
| No LED activity during test. | Cable not properly connected; faulty cable; remote terminator not connected. | Ensure cables are securely connected to both the main unit and remote terminator. Test with a known good cable. |
| Buzzer sounds continuously or unexpectedly. | Short circuit or severe miswiring detected. | Examine the cable for physical damage or incorrect wiring. Check connectors for bent pins. |
| Inconsistent test results. | Loose connections; intermittent cable fault; low battery. | Ensure all connections are tight. Replace battery. Try wiggling the cable during test to identify intermittent faults. |
9. مشخصات
| ماډل | LAN-1 |
| د بریښنا رسول | (1) 9V battery |
| د بیټرۍ ژوند | Up to 20 hours of tests |
| د کیبل ډولونه ازمول شوي | 10/100 base-T, 10 base-2, RJ45 modular, AT&T 258A, EIA/TIA 568A/568B, Token Ring cables |
| Cable Connector Types | RJ45 and BNC |
| د کرښې اعظمي اوږدوالی | 300m |
| وزن | 0.6 lb. / 0.27 kg (approx. 9.5 ounces) |
| ابعاد (H x W x D) | 5.1 x 2.2 x 1.5 in. / 130 x 56 x 38mm |
| ښودل | 18 LEDs (9 Red and 9 Green), 9 LEDs on Remote module |
| د خوندیتوب اطاعت | CE - EMC |
10. د تضمین معلومات
د Amprobe LAN-1 LAN Cable Tester comes with a یو کال محدود تضمین. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, neglect, or unauthorized repair.
For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Amprobe customer support.
11. د پیرودونکي ملاتړ
If you have any questions, require technical assistance, or need to report a problem with your Amprobe LAN-1 LAN Cable Tester, please contact Amprobe customer support.
مهرباني وکړئ له چارواکو څخه لیدنه وکړئ Ampجامې webد اړیکو د خورا تازه معلوماتو او ملاتړ سرچینو لپاره سایټ.
آنلاین سرچینې: www.amprobe.com
