D-Link DGS-1210-48 48-Port Gigabit Smart Switch User Manual

1. پیژندنه

This manual provides detailed instructions for the installation, configuration, and operation of the D-Link DGS-1210-48 48-Port Gigabit Smart Switch. This device is a web-managed switch designed for small to medium-sized businesses, offering advanced management features and high-performance connectivity.

2. د محصول ب Featuresې

• 48 Gigabit Ethernet ports for high-speed network connectivity.
• 4 Combo SFP ports for flexible fiber optic uplink connections.
• Web-based management interface for easy configuration and monitoring.
• Advanced Layer 2 features including VLANs, QoS, and Link Aggregation.
• D-Link Green technology for energy efficiency.
• Switching capacity of 96 Gbps.
• MAC Address Table Size: 8K.
• Packet Forwarding Rate: 71.4 Mpps.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې لاندې توکي ستاسو په بسته کې شامل دي:

• D-Link DGS-1210-48 48-Port Gigabit Smart Switch
• د بریښنا تار
• د ریک ماونټ کټ (بریکٹونه او پیچونه)
• د ربړ پښې (د ډیسټاپ نصبولو لپاره)
• د چټک نصبولو لارښود
• CD-ROM د لارښود او سافټویر سره

که کوم توکي ورک یا زیانمن شوي وي، مهرباني وکړئ د مرستې لپاره خپل سیمه ایز D-Link پلورونکي سره اړیکه ونیسئ.

4. سپړنه

4.1 مخکښ پینل

شکل 4.1: Front Panel of DGS-1210-48 Switch. This image displays the front of the D-Link DGS-1210-48 switch, featuring 48 RJ45 Gigabit Ethernet ports and 4 SFP (Small Form-Factor Pluggable) ports, along with LED indicators for power, system status, and port activity.

The front panel of the DGS-1210-48 switch features 48 10/100/1000BASE-T Gigabit Ethernet ports for connecting network devices. Additionally, there are 4 Combo SFP ports, which can be used for fiber optic uplinks by inserting compatible SFP transceivers. LED indicators provide visual status for power, system activity, and individual port link/activity.

4.2 شاته پینل

شکل 4.2: Rear Panel of DGS-1210-48 Switch. This image shows the rear panel of the D-Link DGS-1210-48 switch, highlighting the AC power input connector and a grounding screw for electrical safety.

The rear panel includes the AC power input connector for connecting the power cord to an electrical outlet. A grounding screw is also present for connecting the switch to an earth ground, which is recommended for electrical safety and protection against static discharge.

5. ترتیب او نصب کول

5.1 د خوندیتوب احتیاطونه

• Ensure the power cord is disconnected before installation or maintenance.
• Install the switch in a cool, dry place away from direct sunlight and heat sources.
• Ensure proper ventilation around the switch.
• Connect the grounding wire to an appropriate earth ground.

5.2 د ډیسټاپ نصب کول

For desktop installation, attach the included rubber feet to the bottom of the switch to prevent scratching and provide stability. Place the switch on a flat, stable surface.

5.3 د ریک ماونټ نصب کول

The DGS-1210-48 can be mounted in a standard 19-inch equipment rack. Use the provided rackmount brackets and screws to secure the switch to the rack. Ensure adequate space for airflow.

۲.۲ د سویچ سره نښلول

1. Connect your network devices (computers, servers, access points) to the RJ45 ports using standard Ethernet cables.
2. If using fiber optic uplinks, insert compatible SFP transceivers into the SFP ports and connect fiber optic cables.
3. Connect the power cord to the switch's AC power input and then to a power outlet.
4. Verify the Power LED illuminates, indicating the switch is receiving power.

6. عملیاتي لارښوونې

۶.۱ ته لومړنی لاسرسی Web سمبالښت برسیر

By default, the DGS-1210-48 switch is configured with a default IP address (e.g., 192.168.0.1) and no password. Refer to the Quick Installation Guide for the exact default IP address.

1. Connect a computer directly to any of the switch's RJ45 ports.
2. Configure your computer's IP address to be in the same subnet as the switch (e.g., if switch is 192.168.0.1, set computer to 192.168.0.10 with subnet mask 255.255.255.0).
3. خلاص a web browser and enter the switch's default IP address in the address bar.
4. Log in using the default username and password (usually 'admin' and no password, or 'admin' for both).
5. It is highly recommended to change the default password immediately after initial login for security purposes.

6.2 بنسټیز ترتیب

یوځل چې ننوتل web د انٹرفیس په کارولو سره، تاسو کولی شئ مختلف ترتیبات تنظیم کړئ:

• IP پته: Change the switch's IP address to match your network's addressing scheme.
• VLANs: Create and configure Virtual Local Area Networks to segment network traffic.
• QoS (د خدماتو کیفیت): Prioritize critical network traffic for optimal performance.
• د لینک مجموعه: د بینډ ویت او بې ځایه کیدو د زیاتوالي لپاره ډیری فزیکي لینکونه په یوه منطقي لینک کې یوځای کړئ.
• د بندر ترتیبات: Configure individual port speed, duplex mode, and enable/disable ports.

Refer to the full user manual on the provided CD-ROM for detailed configuration instructions for advanced features.

7. ساتنه

7.1 د فرم ویئر تازه معلومات

په دوره یي ډول د ډي-لینک ملاتړ وګورئ webد فرم ویئر تازه معلوماتو لپاره سایټ. د فرم ویئر تازه معلومات کولی شي نوي ځانګړتیاوې، د فعالیت ښه والی، او د امنیت ښه والی چمتو کړي. د فرم ویئر تازه کولو کڅوړې سره چمتو شوي لارښوونې په دقت سره تعقیب کړئ.

7.2 Cleaning the Switch

To clean the switch, disconnect the power cord. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

۶.۴ د فابریکې ډیفالټ ته بیا تنظیم کول

If necessary, the switch can be reset to its factory default settings. This typically involves pressing and holding a reset button (often recessed) for a specified duration. Refer to the full user manual for the exact procedure, as this will erase all custom configurations.

8. ستونزه حل کول

This section provides solutions to common issues you may encounter with the DGS-1210-48 switch.

۷.۱ د بریښنا LED بند دی

• ډاډ ترلاسه کړئ چې د بریښنا تار په خوندي ډول د سویچ او د کار کولو بریښنا سایټ سره وصل دی.
• د بل وسیلې په لګولو سره د بریښنا آوټ لیټ فعال دی تصدیق کړئ.
• د هر ډول زیان لپاره د بریښنا تار چیک کړئ.

۶.۲ د شبکې اتصال نشته

• Check the Link/Act LEDs on the switch for the connected ports. A solid green or blinking LED indicates a valid link and activity.
• Ensure Ethernet cables are properly connected and not damaged.
• Verify the network settings (IP address, subnet mask, gateway) on your connected devices.
• If using SFP ports, ensure the SFP transceivers are compatible and correctly inserted, and fiber cables are intact.

۴.۲ لاسرسی نشم کولی Web سمبالښت برسیر

• ډاډ ترلاسه کړئ چې ستاسو د کمپیوټر IP پته د سویچ د IP پتې په څیر په ورته فرعي شبکه کې ده.
• Ensure you are using the correct IP address for the switch. If you changed it and forgot, you may need to reset the switch to factory defaults.
• یو بل هڅه وکړئ web براوزر
• په خپل کمپیوټر کې د فایر وال هر سافټویر په لنډمهاله توګه غیر فعال کړئ.

9. مشخصات

10. د خوندیتوب معلومات

• وسیله مه خلاصوئ casinج. ټول خدمات وړ خدماتو پرسونل ته راجع کړئ.
• د بریښنا رسولو حجم ډاډمن کړئtage د ټاکل شوي حد (240V) دننه دی.
• د بریښنا تار د چلولو یا پنچ کیدو څخه خوندي کړئ.
• Avoid placing the switch near water or in excessively humid environments.
• یوازې د وسیلې سره چمتو شوي بریښنا اډاپټر وکاروئ.

11. تضمین او تخنیکي ملاتړ

د تضمین معلوماتو او تخنیکي ملاتړ لپاره، مهرباني وکړئ د خپل محصول سره شامل شوي تضمین کارت ته مراجعه وکړئ یا رسمي ډي-لینک ته مراجعه وکړئ. webسایټ. د ملاتړ سرچینو کې معمولا FAQs، د ستونزو حل کولو لارښوونې، او د تخنیکي مرستې لپاره د اړیکو معلومات شامل دي.

د ډي لینک رسمي Webسایټ: www.dlink.com