پیژندنه
This manual provides detailed instructions for the installation, operation, and maintenance of the Intermatic T1906 SPDT 24-Hour Time Switch. Please read all instructions carefully before installation and use to ensure proper function and safety.
د خوندیتوب مهم معلومات:
- Always disconnect power at the circuit breaker before installing or servicing the time switch.
- نصب کول باید د ټولو محلي او ملي بریښنایی کوډونو سره سم د وړ بریښنایی متخصص لخوا ترسره شي.
- This device is designed for indoor use within a 3R steel enclosure.
محصول پای ته ورسیدview
The Intermatic T1906 is a robust 24-hour time switch designed for automatic control of electrical loads. It features a single-pole, double-throw (SPDT) switch and operates on 208-277 Volts. Key features include:
- Up to 96 operations (48 ON/48 OFF) every 24 hours.
- 15-minute minimum ON/OFF intervals.
- Captive trippers for easy setting.
- Suitable for applications requiring daily repetitive scheduling.
نصب کول
د خوندیتوب احتیاطونه
- Ensure power is OFF at the main service panel before beginning installation.
- حجم تایید کړئtage supply matches the time switch rating (208-277V).
- Ground the enclosure properly.
پورته کول
- Select a suitable indoor location for the 3R steel enclosure, protected from direct weather and excessive moisture.
- Mount the enclosure securely using appropriate fasteners through the pre-drilled holes.
تارونه
Refer to the wiring diagram provided inside the enclosure cover. The T1906 is an SPDT switch, meaning it has one common terminal and two switched terminals (normally open and normally closed).
- د راتلوونکي کرښې سره وصل کړئ حجمtage to the designated line terminal.
- Connect the load(s) to the appropriate switched terminals (NO or NC) and the neutral/return line.
- ډاډ ترلاسه کړئ چې ټولې اړیکې ټینګې او خوندي دي.
- احتیاط: Make sure non-operating trippers (if any) clear the switch lever.
- مهم: The insulator must be replaced after wiring to prevent shock.
شکل 1: داخلي view of the Intermatic T1906 Time Switch. This image displays the 24-hour clock dial with numerous small, gold-colored captive trippers around its circumference. A central silver hand indicates the current time. Below the dial, a translucent plastic insulator covers wiring terminals, with a warning label visible: "CAUTION: MAKE SURE NON-OPERATING TRIPPERS (IF ANY) CLEAR SWITCH LEVER" and "THIS INSULATOR MUST BE REPLACED AFTER WIRING TO PREVENT SHOCK."
عملیاتي لارښوونې
د وخت تنظیم کول
- ډایل وګرځوئ clockwise only until the current time aligns with the time indicator arrow. The dial is marked with AM and PM hours.
د وخت د فعالولو/بندولو تنظیم کول
The T1906 uses captive trippers around the dial to set ON and OFF times. Each tripper represents a 15-minute interval.
- To set an ON period, push the trippers outwards for the desired duration.
- To set an OFF period, leave the trippers in their inward position for the desired duration.
- Ensure that the trippers are firmly set in their respective positions (in or out).
- For models with a skipper wheel (if applicable), operations can be omitted on selected days of the week. Refer to the specific instructions for skipper wheel adjustment if your model includes this feature.
لاسي اوورډ
The time switch may include a manual override lever. Consult the specific product diagram for its location and operation. This allows for temporary ON/OFF control without affecting the programmed schedule.
ساتنه
- The Intermatic T1906 is designed for minimal maintenance.
- Periodically inspect the enclosure for any signs of damage or corrosion.
- ډاډ ترلاسه کړئ چې د تارونو ټولې اړیکې خوندي پاتې شي.
- Keep the internal components free from dust and debris.
- Do not lubricate any internal parts.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Time switch does not operate. | No power supply; incorrect wiring; faulty motor. | Check circuit breaker and power connections. Verify wiring against diagram. If motor is faulty, contact Intermatic support. |
| بار په پروګرام شوي وختونو کې نه فعال/بند کیږي. | Trippers incorrectly set; time dial not set to current time; faulty switch mechanism. | Ensure trippers are pushed in/out firmly. Verify current time setting. Check for obstructions to the switch lever. |
| Motor hums but dial does not turn. | Obstruction in gear train; motor issue. | Disconnect power and inspect for obstructions. If problem persists, contact Intermatic support. |
If troubleshooting steps do not resolve the issue, contact Intermatic customer support or a qualified electrician.
مشخصات
- ماډل: T1906
- ډول: 24-Hour SPDT Time Switch
- والیtage: 208-277 وولټونه
- احاطه: 3R Indoor Steel Enclosure
- ابعاد (محصول): نږدې 5.5 x 3.5 x 8.25 انچه
- وزن: تقریبا 2 پونډه
- Maximum Operations: 96 (48 ON / 48 OFF) per 24 hours
- Minimum ON/OFF Time: 15 دقيقو
- مواد: فولاد
- تصدیق: CSA (Canada and US)
د تضمین معلومات
For detailed warranty information, please refer to the manufacturer's official documentation or visit the Intermatic webسایټ. د تضمین شرایط معمولا د پیرود نیټې څخه د یوې ټاکلې مودې لپاره د موادو او کاریګرۍ نیمګړتیاوې پوښي.
د پیرودونکي ملاتړ
For technical assistance, replacement parts, or further inquiries, please contact Intermatic customer support. You can find contact information on the official Intermatic webسایټ یا ستاسو د محصول پرچون پلورونکي له لارې.
انترماتیک Webسایټ: www.intermatic.com
