1. پیژندنه
The Elation Professional SDC-6 v2 is a compact and versatile 6-channel DMX controller designed for easy operation of DMX-compatible lighting fixtures. It features six individual channel faders and one master fader, providing intuitive control over various lighting effects. This manual provides essential information for the safe and efficient use of your SDC-6 v2 controller, including setup, operation, maintenance, and troubleshooting.
2. د خوندیتوب لارښوونې
Please read these safety instructions carefully before operating the device. Failure to comply may result in damage to the unit, property, or personal injury.
- وسیله تل د بریښنا له یوې ځمکې سره وصل کړئ.
- Ensure the power adapter's voltage د محلي بریښنا رسولو سره سمون لري.
- واحد د باران، رطوبت، یا ډیر رطوبت سره مه مخ کوئ.
- د تودوخې سرچینو ته نږدې یا مستقیم لمر وړانګو کې د واحد له ایښودلو څخه ډډه وکړئ.
- که چیرې د بریښنا تار خراب شوی وي نو واحد مه چلوئ.
- Refer all servicing to qualified service personnel. There are no user-serviceable parts inside.
- د پاکولو یا هر ډول ساتنې ترسره کولو دمخه بریښنا قطع کړئ.
3. د بسته محتويات
د بسته بندۍ د پرانیستلو پر مهال ډاډ ترلاسه کړئ چې لاندې ټول لیست شوي توکي شتون لري او په ښه حالت کې دي:
- Elation Professional SDC-6 v2 DMX Controller
- د 9V ځواک اډیپټر
- د کارونکي لارښود (دا لاسوند)
4. ترتیب کول
Follow these steps to set up your SDC-6 v2 DMX controller:
- ځای په ځای کول: Place the controller on a stable, flat surface away from excessive heat, moisture, or dust.
- د DMX پیوستون: Connect the 3-pin DMX output connector of the SDC-6 v2 to the DMX input of your first DMX-compatible lighting fixture. If you have multiple fixtures, daisy-chain them by connecting the DMX output of the first fixture to the DMX input of the second, and so on.
- د بریښنا پیوستون: Insert the 9V power adapter into the power input jack on the controller. Plug the power adapter into a suitable electrical outlet. The power indicator LED on the controller should illuminate.
شکل 4.1: پورته view of the Elation SDC-6 v2 DMX Controller, showing the six channel faders, master fader, and power indicator.
شکل 4.2: اړخ view of the Elation SDC-6 v2 DMX Controller, illustrating the battery compartment for optional portable power (battery not included for primary operation).
5. عملیاتي لارښوونې
The SDC-6 v2 provides straightforward control over your DMX lighting fixtures.
5.1. Channel Faders (1-6)
Each of the six numbered faders (1 through 6) corresponds to a DMX channel. Moving a fader up increases the DMX value for that channel (from 0 to 255), while moving it down decreases the value. The specific function of each channel (e.g., dimmer, color, strobe) depends on the DMX address and mode settings of your connected lighting fixture.
5.2. Master Fader
The Master fader controls the overall output level of all active DMX channels. Moving the Master fader down will dim or turn off all lights controlled by the individual channel faders, regardless of their individual settings. Moving it up will restore the output to the levels set by the individual channel faders.
5.3. د بریښنا شاخص
The Power indicator LED illuminates when the unit is receiving power, indicating it is ready for operation.
6. ساتنه
Proper maintenance ensures the longevity and reliable operation of your SDC-6 v2 controller.
- پاکول: Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, solvents, or harsh chemicals.
- ذخیره کول: کله چې د اوږدې مودې لپاره نه کارول کیږي، کنټرولر په یخ، وچ ځای کې وساتئ، د دوړو او سختو تودوخې څخه خوندي وساتئ.
- ځواک: Always disconnect the power adapter when the unit is not in use or before cleaning.
7. ستونزه حل کول
If you encounter issues with your SDC-6 v2 controller, refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| د بریښنا شاخص رڼا نشته | د بریښنا اډاپټر وصل شوی نه دی یا خراب دی؛ د بریښنا آوټ لیټ فعال نه دی. | Ensure power adapter is securely connected to the unit and a working outlet. Test the outlet with another device. |
| Lights not responding to faders | Incorrect DMX connection; Master fader is down; DMX address mismatch on fixtures; fixture not in DMX mode. | Check DMX cable connections. Ensure Master fader is up. Verify DMX addresses on fixtures match the channels being controlled. Confirm fixtures are set to DMX mode. |
| په وقفه يي ډول کنټرول | Loose DMX cable connection; DMX signal interference. | Secure all DMX cable connections. Use high-quality DMX cables. Avoid running DMX cables parallel to power cables. |
8. مشخصات
| ماډل | SDC6 |
| برانډ | Elation Professional (ADJ) |
| چینلونه | 6 DMX Channels + 1 Master Fader |
| د DMX نښلونکی | 3-pin XLR DMX Output |
| د بریښنا رسول | 9V DC (via included power adapter) |
| ابعاد (L x W x H) | 173 mm x 153 mm x 55 mm ( 6.81 in x 6.02 x 2.17 in ) |
| وزن | ۷.۰ کیلو ګرامه (۱۵.۵ پونډه) |
| رنګ | تور |
| د اصلي هیواد | چین |
9. تضمین او ملاتړ
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elation Professional webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
For further assistance, you may contact the seller or manufacturer directly. Contact details are typically available on their respective websites or on your purchase invoice.
