د WEN 2305 روټري وسیلې کټ د فلیکس شافټ کارونکي لارښود سره

1. پیژندنه

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your WEN 2305 Rotary Tool Kit with Flex Shaft. Please read this manual thoroughly before initial use and retain it for future reference.

2. د خوندیتوب معلومات

Always wear appropriate personal protective equipment, including safety glasses and a dust mask, when operating the rotary tool. Ensure the workpiece is securely clamped. Disconnect the tool from the power source before changing accessories or performing maintenance. Keep hands and loose clothing away from rotating parts. Do not operate the tool in damp یا لوند شرایط.

3. د بسته محتويات

Your WEN 2305 Rotary Tool Kit includes the following items:

• WEN 2305 Rotary Tool
• Flexible Shaft Attachment
• 80-Piece Accessory Set (including various bits, sanding discs, polishing pads, mandrels, and more)
• Bit Changing Spanner Wrench
• د ذخیره کولو قضیه

Image: The WEN 2305 Rotary Tool Kit, including the main tool, flexible shaft, and various accessories, stored within its black carrying case.

4. ترتیب کول

4.1 د لوازمو ضمیمه کول

1. Ensure the rotary tool is unplugged.
2. Press and hold the spindle lock button located on the tool's head.
3. د کولټ مغز خلاص کړئ.
4. Insert the desired accessory shank into the collet. Ensure the shank is fully seated.
5. Tighten the collet nut securely using the provided spanner wrench while holding the spindle lock button.

4.2 Attaching the Flexible Shaft

1. Ensure the rotary tool is unplugged.
2. Unscrew the collet nut and remove any installed accessory from the main tool.
3. Insert the flexible shaft's drive end into the collet of the main rotary tool.
4. Tighten the collet nut securely.
5. Attach the desired accessory to the handpiece of the flexible shaft following the same procedure as for the main tool.

Image: The flexible shaft attachment provides enhanced control for detailed tasks.

5. عملیاتي لارښوونې

۴.۱ د بریښنا او سرعت کنټرول

Plug the tool into a standard 120V, 60Hz AC outlet. The WEN 2305 features variable speed control, ranging from 8,000 to 30,000 RPM. Adjust the speed using the dial located on the tool body to match the requirements of your task and material. Lower speeds are generally suitable for polishing and delicate work, while higher speeds are for cutting and grinding.

5.2 غوښتنلیکونه

The WEN 2305 Rotary Tool is versatile and can be used for a variety of tasks:

• پرې کول: Use cut-off wheels for slicing through various materials.
• سانډینګ: Utilize sanding bands and discs for smoothing surfaces and shaping.
• پالش کول: Apply polishing pads and compounds to achieve a high-gloss finish.
• Shaping & Grinding: Employ grinding stones for material removal and contouring.
• برمه کول: Use drill bits for creating small holes.
• د اوبو ایستل: Remove sharp edges or excess material after cutting or grinding.
• نقاشي: Use specialized bits for detailed engraving on various surfaces.

Image: The rotary tool being used for polishing a brass instrument, demonstrating its precision capabilities.

Image: A selection of grinding stones from the 80-piece accessory set.

Image: Various sanding bands included in the accessory kit for smoothing and shaping.

6. ساتنه

Regular cleaning of the tool and its accessories is recommended to ensure optimal performance and longevity. Remove dust and debris from the ventilation slots. Store the tool and accessories in the provided case in a dry, clean environment. Periodically inspect the power cord for any damage.

7. ستونزه حل کول

• وسیله نه پیل کیږي: Ensure the tool is properly plugged into a functioning power outlet and the power switch is in the 'ON' position.
• زیات فشار: Check that the accessory is correctly installed and securely tightened in the collet. Ensure the accessory is not bent or damaged.
• کم شوی فعالیت: The accessory may be dull or worn and needs replacement. Ensure the correct speed setting is selected for the task.

8. مشخصات

9. تضمین او ملاتړ

The WEN 2305 Rotary Tool Kit is backed by a 1-year limited warranty. For warranty claims, technical assistance, or to inquire about replacement parts, please contact WEN customer support. Refer to the product packaging or the official WEN webد اوسني اړیکو معلوماتو لپاره سایټ.