د الټرونکس OLS120 بریښنا رسولو / چارجر کارونکي لارښود

پیژندنه

This manual provides instructions for the installation, operation, and maintenance of the Altronix OLS120 Power Supply/Charger. The OLS120 is designed to provide regulated 12VDC or 24VDC power at 4 amps, with integrated AC and battery monitoring capabilities, utilizing a 115VAC input.

د خوندیتوب مهمې لارښوونې

• نصب او خدمت باید یوازې د وړ خدماتو پرسونل لخوا ترسره شي.
• To reduce the risk of electric shock, disconnect AC power before servicing.
• د ډیر تودوخې مخنیوي لپاره مناسب هوا ورکول ډاډمن کړئ.
• واحد باران یا رطوبت ته مه ښکاره کوئ.
• Use only recommended battery types for backup power.

محصول پای ته ورسیدview

The Altronix OLS120 is a robust power supply/charger unit engineered for reliable performance in various applications requiring stable DC power and battery backup.

کلیدي ځانګړتیاوې

• Selectable 12VDC or 24VDC output.
• 4 amp continuous supply current.
• Integrated AC and battery monitoring.
• 115VAC input for power.

د اجزاوو پیژندنه

This image displays the Altronix OLS120 circuit board, highlighting various components essential for its operation. Familiarize yourself with these components before installation.

مهمې برخې:

• والیtagد انتخاب کونکي سویچ: Located at the top right, labeled "OFF 24VDC ON 12VDC". This switch allows selection between 12VDC and 24VDC output.
• د AC ان پټ ټرمینلونه: Positioned at the bottom left, marked for 115VAC input connections.
• د DC محصول ټرمینالونه: Located at the bottom right, these terminals are for connecting devices that require 12VDC or 24VDC power.
• د بیټرۍ ټرمینلونه: Found at the bottom right, near the PTCs, for connecting backup batteries.
• AC Fail Indicator (LED): An LED near the "AC FAL" label, which illuminates upon loss of AC power.
• Low Battery Indicator (LED): An LED near the "LOW BAT" label, indicating a low battery condition.
• ټرانسفارمر: A central component, often labeled with part numbers like "P POL-30030", responsible for stepping down the AC voltage.
• کیپسیټرونه: Large cylindrical components (e.g., "C2", "C29A") used for filtering and energy storage.
• Fuses/PTCs: Overcurrent protection devices (e.g., "PTC1", "PTC2") to safeguard the circuit.

تنظیم او نصب کول

1 ګام: نصب کول

Securely mount the OLS120 in a suitable enclosure or location, ensuring adequate ventilation to prevent heat buildup.

مرحله 2: والیتtage انتخاب

حجم پیدا کړئtage selector switch (labeled "OFF 24VDC ON 12VDC") on the circuit board. Set the switch to the desired output voltage (12VDC or 24VDC) before connecting any power.

Step 3: AC Power Connection

Connect the 115VAC input power to the designated AC input terminals. Ensure proper polarity and secure connections. Refer to local electrical codes for wiring practices.

Step 4: DC Output Connection

Connect your devices requiring DC power to the DC output terminals. Observe correct polarity to prevent damage to the connected equipment.

Step 5: Battery Connection (Optional)

For battery backup functionality, connect a suitable rechargeable battery to the battery terminals. Ensure correct polarity. The OLS120 will charge the battery and automatically switch to battery power upon AC failure.

عملیات

پاور کول

Once all connections are secure and verified, apply 115VAC power to the unit. The unit will power on and begin providing regulated DC output.

د وضعیت شاخصونه

• AC Fail (LED): This indicator illuminates when the AC input power is lost, signaling that the unit is operating on battery backup (if connected).
• Low Bat (LED): This indicator illuminates when the connected battery voltage drops below a pre-set threshold, indicating that the battery requires charging or replacement.

ساتنه

عمومي پاملرنه

Keep the unit clean and free from dust accumulation. Ensure that all ventilation openings are not obstructed to maintain optimal operating temperature.

د بیټرۍ ساتنه

If a backup battery is used, periodically check its condition and charge level. Replace the battery as recommended by the battery manufacturer or when its performance degrades.

د ستونزو حل کول

For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact Altronix technical support for further assistance.

مشخصات

• د محصول ابعاد: 8.4 x 5.7 x 2.9 انچه
• د توکي وزن: ۲.۴۵ پونډه
• د محصول Voltage: 12VDC or 24VDC (selectable)
• اوسنی تولید: 4 amp
• ننوتۍ جلدtage: 115VAC
• جوړونکی: ALTRONIX
• د ماډل شمیره: OLS120D2X
• د لومړي شتون نیټه: د ۲۰۲۴ کال د جولای ۹ مه

تضمین او تخنیکي ملاتړ

Altronix products are backed by a manufacturer's warranty. For specific warranty details, terms, and conditions, please refer to the official Altronix webسایټ یا هغه اسناد چې ستاسو د پیرود سره شامل دي.

For technical assistance, product inquiries, or support, please contact Altronix customer service directly. Contact information can typically be found on the manufacturer's webسایټ

Manufacturer: Altronix Corp.