Performance Tool M619 Auto Recoil Reel with 50-Foot Hose User Manual

1. پیژندنه

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Performance Tool M619 Auto Recoil Reel with 50-Foot Hose. Please read this manual thoroughly before use and retain it for future reference.

The Performance Tool M619 is designed for convenient air hose management, featuring an auto-recoil mechanism and a positive latching system to secure the hose at the desired length. It includes a 50-foot, 3/8-inch air hose capable of handling up to 300 PSI.

2. د خوندیتوب معلومات

خبرداری: د دې خوندیتوب لارښوونو په تعقیب کې پاتې راتلل ممکن د جدي ټپي کیدو یا ملکیت زیان لامل شي.

• Always wear appropriate personal protective equipment, including eye protection, when operating air tools.
• Ensure the hose reel is securely mounted to a stable surface before connecting to an air supply.
• Do not exceed the maximum operating pressure of 300 PSI for the included air hose.
• Inspect the hose for cuts, abrasions, or damage before each use. Replace damaged hoses immediately.
• ماشومان او لیدونکي د کاري ساحې څخه لرې وساتئ.
• Disconnect the air supply before performing any maintenance or adjustments to the hose reel.
• Avoid sudden release of the hose during retraction to prevent injury or damage.
• د نلی ریل د هغې د ټاکل شوي کارونې پرته د نورو موخو لپاره مه کاروئ.

3. د بسته محتويات

Upon unpacking, verify that all components are present and undamaged. The package includes:

• Performance Tool M619 Auto Recoil Reel (pre-assembled with 50-foot, 3/8-inch air hose)

Note: Mounting hardware is not included and must be sourced separately based on your installation surface.

4. ترتیب او نصب کول

The Performance Tool M619 Auto Recoil Reel is designed for wall mounting. Proper installation is crucial for safe and reliable operation.

4.1 پورته موقعیت

Select a sturdy wall or overhead beam capable of supporting the weight of the hose reel and the forces exerted during hose extension and retraction. Ensure the mounting location allows for unrestricted movement of the hose and easy access to the air supply connection.

4.2 د نصب کولو طرزالعمل

1. Position the hose reel against the chosen mounting surface and mark the locations for the mounting holes.
2. Drill pilot holes appropriate for your chosen mounting hardware (e.g., lag bolts for wood studs, anchor bolts for concrete).
3. Securely fasten the hose reel to the mounting surface using suitable hardware. Ensure all fasteners are tightened to prevent movement.

4.3 د هوا د رسولو اتصال

Connect your air compressor's main air line to the inlet swivel fitting on the hose reel. Ensure all connections are tight and leak-free. The reel features four-direction rollers to guide the hose smoothly during use.

Image: The Performance Tool M619 Auto Recoil Reel, illustrating its wall-mounted design and the path of the 50-foot air hose.

5. عملیاتي لارښوونې

۵.۱ د نلی غځول

To extend the air hose, simply pull the hose gently to the desired length. The positive latching mechanism will engage, locking the hose in place. You will hear a clicking sound as the latch engages.

۶.۲ د نلی بیرته اخیستل

To retract the hose, pull the hose out slightly further until the latching mechanism disengages. Then, guide the hose back into the reel. Allow the auto-recoil mechanism to slowly and evenly retract the hose. Do not release the hose abruptly, as this can cause damage or injury.

۵.۲ د هوا وسایلو نښلول

Attach your air tools to the end of the 3/8-inch air hose using appropriate quick-connect fittings (not included). Ensure a secure connection before operating any air tools.

6. ساتنه

Regular maintenance ensures the longevity and safe operation of your hose reel.

• د نلی معاینه: Periodically inspect the entire length of the air hose for signs of wear, cuts, bulges, or leaks. Replace the hose if any damage is found.
• Reel Cleaning: Keep the reel housing and rollers clean from dirt, dust, and debris. A damp ټوکر د پاکولو لپاره کارول کیدی شي.
• غوړول: The main shaft features permanently lubricated all-brass components, requiring no additional lubrication under normal operating conditions.
• د خوندیتوب نصبول: Regularly check the mounting hardware to ensure it remains tight and secure.

7. ستونزه حل کول

If you encounter issues with your hose reel, refer to the following common problems and solutions:

• Hose does not retract:
  • Ensure the hose is pulled out slightly to disengage the latching mechanism before attempting to retract.
  • Check for obstructions around the hose or within the reel mechanism.
  • Verify that the spring mechanism is not damaged. If damaged, contact customer support.
• Hose does not latch:
  • Ensure the hose is pulled out far enough for the latching mechanism to engage.
  • Inspect the latching mechanism for debris or damage.
• د هوا لیک:
  • Check all connections (inlet, tool connection) for tightness.
  • Inspect the hose for punctures or cracks. Replace damaged hose sections or the entire hose if necessary.

8. مشخصات

9. تضمین او ملاتړ

For warranty information, please refer to the documentation provided with your purchase or contact Performance Tool customer support directly. Keep your purchase receipt as proof of purchase.

For technical assistance or replacement parts, please contact the manufacturer or your retailer.