د ګارډنر بینډر B343S هیدرولیک یو شاټ بینډر لارښوونې لارښود

1. پیژندنه او وروستهview

The Gardner Bender B343S is a robust hydraulic one-shot bender designed for efficiently bending 1 1/4 to 4 inch rigid steel and rigid aluminum conduit. This manual provides essential information for the safe and effective setup, operation, and maintenance of your B343S bender.

Image of the Gardner Bender B343S Hydraulic One-Shot Bender, a robust tool designed for bending rigid conduit.

2. د خوندیتوب معلومات

Always prioritize safety when operating any heavy-duty equipment. Failure to follow these safety guidelines can result in serious injury or property damage.

• لارښود ولولئ: Thoroughly read and understand all instructions and warnings in this manual before operating the bender.
• شخصي محافظتي تجهیزات (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toe boots.
• د کار ساحه: Ensure your work area is clean, well-lit, and free from obstructions. Keep bystanders away from the operating area.
• د بریښنا سرچینه: If using an external hydraulic pump (not included with B343S), ensure it is properly grounded and connected to a suitable power source. Disconnect power before performing any maintenance or adjustments.
• خوندي کاري ټوټه: Always ensure the conduit is properly secured in the bender before initiating a bend.
• د تجهیزاتو معاینه کول: Before each use, inspect the bender for any signs of damage, wear, or loose components. Do not operate damaged equipment.
• هیدرولیک مایع: Handle hydraulic fluid with care. Refer to the pump manufacturer's instructions for safe handling and disposal.

3. د محصول ب Featuresې

The Gardner Bender B343S Hydraulic One-Shot Bender offers several key features designed for efficiency and ease of use:

• Bends 1 1/4 to 4 inch rigid steel and rigid aluminum conduit.
• Eject-O-Matic feature retains conduit with a T-pin while the bending shoe is hydraulically retracted.
• Once the bend is complete, the conduit automatically pops free, saving time.
• Optional 5-inch conversion kit (B350) is available for segment bending (segment only).

4. ترتیب کول

Follow these steps to set up your Gardner Bender B343S bender for operation:

1. اجزا خلاص کړئ: Carefully remove all components from the packaging. Verify that all parts are present and undamaged.
2. Assemble Bender: Refer to the assembly diagrams (if provided with your unit) to connect the main bender frame, bending shoe, and any other necessary components. The included screwdriver may be required for this step.
3. Connect Hydraulic Pump (Sold Separately): The B343S is supplied without a pump. Connect your compatible hydraulic pump to the bender's hydraulic cylinder according to the pump manufacturer's instructions. Ensure all connections are secure and leak-free.
4. Position Bender: Place the bender on a stable, level surface capable of supporting its weight (approximately 364 pounds) and the forces generated during bending.
5. Select Bending Shoe: Choose the appropriate bending shoe for the size of conduit you intend to bend. Install it securely onto the bender.

5. عملیات

Once the bender is set up, follow these steps for safe and effective conduit bending:

1. Mark Conduit: Accurately mark the conduit at the desired bend point.
2. Load Conduit: Carefully place the conduit into the bending shoe, aligning the mark with the bender's reference point. Ensure the conduit is seated firmly.
3. Engage Eject-O-Matic: If using the Eject-O-Matic feature, ensure the T-pin is correctly engaged to retain the conduit.
4. Initiate Bend: Activate the hydraulic pump to extend the cylinder and begin the bending process. Monitor the bend angle closely.
5. Stop Bend: Once the desired bend angle is achieved, release the hydraulic pressure.
6. Retract Cylinder: Retract the hydraulic cylinder. The Eject-O-Matic feature will automatically release the conduit as the shoe retracts.
7. Remove Conduit: Carefully remove the bent conduit from the bender.
8. تکرار کړئ: For multiple bends, repeat the process, ensuring proper alignment and safety for each bend.

6. ساتنه

Regular maintenance ensures the longevity and optimal performance of your Gardner Bender B343S bender.

• پاکول: After each use, clean the bender to remove any dirt, debris, or metal shavings. Use a dry cloth or soft brush.
• معاینه: Periodically inspect all moving parts, hydraulic connections, and structural components for wear, damage, or corrosion. Replace any worn or damaged parts immediately.
• هیدرولیک سیسټم: Check hydraulic fluid levels and condition regularly according to your pump's manual. Replace fluid as recommended. Inspect hoses and fittings for leaks.
• غوړول: Apply a light coat of appropriate lubricant to pivot points and sliding surfaces as needed to ensure smooth operation.
• ذخیره کول: Store the bender in a clean, dry environment when not in use.

7. ستونزه حل کول

دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو یې د عملیاتو په جریان کې ورسره مخ کیدی شئ.

8. مشخصات

Key specifications for the Gardner Bender B343S Hydraulic One-Shot Bender:

• ماډل: B343S
• Bending Capacity: 1 1/4 to 4 inch rigid steel and rigid aluminum conduit
• د توکي وزن: نږدې 364 پونډه (165 کیلو ګرامه)
• مواد: المونیم
• د بریښنا سرچینه: Requires external Corded Electric Hydraulic Pump (not included)
• شاملې برخې: سکرو ډرایور
• UPC: 032076152581

9. تضمین او ملاتړ

For information regarding product warranty, technical support, or replacement parts for your Gardner Bender B343S Hydraulic One-Shot Bender, please contact Gardner Bender customer service directly or visit their official website. Keep your purchase receipt and product serial number handy for faster service.

Gardner Bender Official Webسایټ: Visit the Gardner Bender Store on Amazon