د جونیپر EX2200-C-12T-2G پرت 3 سویچ کارن لارښود

1. پیژندنه

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your Juniper EX2200-C-12T-2G Layer 3 Switch. Please read this manual thoroughly before using the device to ensure proper functionality and safety. The Juniper EX2200-C-12T-2G is a compact, fanless, and power-efficient platform designed for low-density micro branch deployments, commercial access, or enterprise workgroup environments.

2. محصول ختم شوview

2.1. کلیدي ځانګړتیاوې

• Silent and power-efficient operation.
• Compact and fanless form factor.
• Layer 3 switching capabilities.
• 12 x 1000Base-T RJ-45 ports.
• 2 x SFP ports.
• Runs on Junos Operating System.

2.2. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

• Juniper EX2200-C-12T-2G Layer 3 Switch
• د بریښنا کیبل
• 12 x 1000Base-T RJ-45 cables (Ethernet cables)
• 2 x SFP cables

2.3. سپړنه

The Juniper EX2200-C-12T-2G switch features a robust design with various ports and indicators on its front panel.

شکل 1: مخکی view of the Juniper EX2200-C-12T-2G Layer 3 Switch. This image displays the front panel of the switch, highlighting the 12 RJ-45 Ethernet ports, two SFP uplink ports, console ports (RJ45 and Mini-USB), and various status LEDs including SYS, SPD, ALM, DX, CON, EN, and PoE indicators.

شکل ۲: بدیل جبهه view of the Juniper EX2200-C-12T-2G Layer 3 Switch. This perspective offers a clearer view of the port numbering (0-11 for RJ-45 ports) and the labeling of the SFP ports and management interfaces.

3. ترتیب کول

3.1. د سایټ چمتو کول

• چاپیریال: Place the switch in a clean, dry, and well-ventilated area. Ensure the ambient temperature does not exceed 40 degrees Celsius.
• پورته کول: The compact design allows for desktop placement or wall mounting (mounting hardware not included).
• د بریښنا سرچینه: Connect the switch to a reliable power outlet using the provided power cable. The switch operates on 230 Volts.

۵. د سویچ سره نښلول

1. د بریښنا پیوستون: Connect the power cable to the switch's power inlet and then to an appropriate electrical outlet.
2. د شبکې اړیکې:
   • RJ-45 بندرونه: Use the provided 1000Base-T RJ-45 cables to connect network devices (computers, servers, other switches) to the 12 Ethernet ports (labeled 0-11) on the front panel.
   • د SFP بندرونه: Insert SFP transceivers (if required) into the two SFP ports and connect fiber optic cables for uplink or high-speed connections.
3. Console Connection (Initial Configuration): For initial configuration and management, connect a serial cable from your management workstation to the CON (console) port on the switch. Alternatively, a Mini-USB console port is also available.

4. عملیاتي لارښوونې

4.1. په بریښنا چالانول

Once the power cable is connected, the switch will automatically power on. The boot process for the Junos OS may take several minutes.

4.2. د LED شاخصونه

د عملیاتي حالت لپاره د مخکینۍ پینل LEDs څارنه وکړئ:

• SYS (سیسټم): Indicates the overall system status. Typically solid green for normal operation.
• SPD (سرعت): Indicates the link speed of the connected port.
• ALM (Alarm): Indicates an alarm condition. Refer to the Junos OS documentation for specific alarm codes and troubleshooting.
• DX (Duplex): Indicates the duplex mode of the connected port.
• CON (Console): Indicates activity on the console port.
• EN (Enable): د وضعیت شاخص.
• PoE (په ایترنیټ باندې بریښنا): If applicable, indicates PoE status for ports. (Note: This model does not explicitly list PoE as a feature, but the LED is present).

4.3. ترتیب کول

The Juniper EX2200-C-12T-2G switch is managed using the Junos Operating System via a Command Line Interface (CLI). Access the CLI through the console port or via SSH after initial network configuration. Refer to the official Juniper Networks Junos OS documentation for detailed configuration procedures, including VLAN setup, routing protocols, and security settings.

5. ساتنه

5.1. عمومي پاملرنه

• سویچ پاک او له دوړو څخه پاک وساتئ. د پاکولو لپاره نرم او وچ ټوکر وکاروئ.
• Ensure adequate airflow around the device, even though it is fanless, to prevent heat buildup.
• د سویچ د سختې تودوخې، رطوبت، یا مستقیم لمر وړانګو سره د مخ کیدو څخه ډډه وکړئ.

5.2. د فرم ویئر تازه معلومات

په دوره یي ډول د جونیپر شبکې ملاتړ وګورئ website for available Junos OS updates. Applying updates can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided by Juniper Networks for safe firmware upgrade procedures.

6. ستونزه حل کول

۵. د برېښنا ستونزې

• ځواک نشته: Verify the power cable is securely connected to both the switch and the power outlet. Check the power outlet with another device.

۳. د اتصال ستونزې

• لینک نشته: Check the Ethernet or fiber optic cables for secure connections and damage. Verify the connected device is powered on and functioning correctly. Observe the port's Link/Activity LED.
• ورو اړیکه: Ensure cables are appropriate for the desired speed (e.g., Cat5e/6 for Gigabit Ethernet). Check for duplex mismatches or network congestion.

6.3. Alarm LED On

If the ALM LED is illuminated, it indicates a system alarm. This could be due to various reasons such as hardware failure, environmental issues, or configuration errors. Access the switch's CLI via the console port to view detailed alarm messages and logs. Consult the Junos OS documentation or Juniper Networks support for specific alarm interpretations and resolution steps.

7. تخنیکي مشخصات

8. تضمین او ملاتړ

8.1. د تضمین معلومات

For detailed warranty information regarding your Juniper EX2200-C-12T-2G switch, please refer to the warranty card included with your product or visit the official Juniper Networks webسایټ. د تضمین شرایط او مقررات ممکن د سیمې او پیرود نیټې سره سم توپیر ولري.

8.2. تخنیکي ملاتړ

If you encounter issues that cannot be resolved using the troubleshooting steps in this manual, or require advanced assistance, please contact Juniper Networks technical support. Support resources, including documentation, knowledge bases, and contact information, are available on the official Juniper Networks support portal.