1. محصول ختم شوview
The IDEC RJ1S-C-D12 is a compact and efficient RJ Series Slim Power Relay designed for various industrial control applications. This single-pole double-throw (SPDT) relay operates on a 12 VDC coil voltage and features blade terminals for plug-in mounting, typically used with SJ sockets. It is engineered for reliable switching of electrical circuits, handling currents up to 12 Amps at 250 VAC or 30 VDC.
شکل 1: لید view of the IDEC RJ1S-C-D12 Slim Power Relay, showing its compact design and transparent casing.
شکل 2: لاندې view of the IDEC RJ1S-C-D12 relay, illustrating the blade terminals and coil voltage marking (12VDC).
2. د خوندیتوب معلومات
Always observe the following safety precautions to prevent injury or damage to the product and associated equipment:
- ډاډ ترلاسه کړئ چې بریښنا د نصبولو، تار لګولو، یا ساتنې دمخه قطع شوې ده.
- Verify that the relay's voltage and current ratings match the application requirements.
- Do not exceed the specified contact ratings (12 Amps, 250 VAC, 30 VDC).
- Install the relay in an appropriate enclosure to protect it from environmental factors and accidental contact.
- یوازې وړ پرسونل باید نصب او تارونه ولګوي.
- Avoid touching terminals when power is applied.
3. ترتیب او نصب کول
The RJ1S-C-D12 relay is designed for plug-in mounting, typically into compatible SJ sockets (sold separately). Follow these steps for proper installation:
- د بریښنا قطع کول: Before beginning, ensure all power to the circuit is turned off and locked out to prevent accidental energization.
- د ساکټ چمتو کول: If not already installed, mount the appropriate SJ socket securely in your control panel or enclosure. Ensure wiring to the socket terminals is correct according to your circuit diagram.
- Relay Insertion: Align the blade terminals of the RJ1S-C-D12 relay with the corresponding slots in the SJ socket. Gently but firmly push the relay into the socket until it is fully seated. The relay should click into place if the socket has a locking mechanism.
- تایید: Double-check that the relay is securely seated and that all terminals are properly engaged.
- د بریښنا بیا رغونه: Once installation is complete and verified, power can be safely restored to the circuit.
یادونه: The relay's coil is rated for 12 VDC. Ensure the control voltage applied to the coil terminals matches this specification to prevent damage or improper operation.
۴. د کار اصول
The IDEC RJ1S-C-D12 is a Single-Pole Double-Throw (SPDT) relay. This means it has one common contact that can switch between two other contacts (normally open and normally closed).
- بې انرژي حالت: کله چې هیڅ والی نه ويtage is applied to the 12 VDC coil, the common contact is connected to the Normally Closed (NC) contact.
- انرژي لرونکی حالت: When 12 VDC is applied to the coil, an electromagnetic field is generated, which pulls the common contact away from the NC contact and connects it to the Normally Open (NO) contact.
- د اړیکو درجه: The relay contacts are rated for switching loads up to 12 Amps. The maximum voltage for AC loads is 250 VAC, and for DC loads, it is 30 VDC. Adhering to these ratings is crucial for the longevity and safe operation of the relay.
5. ساتنه
The RJ1S-C-D12 relay is designed for long-term reliability with minimal maintenance. However, periodic inspection can help ensure optimal performance:
- بصری معاینه: Periodically inspect the relay and its socket for any signs of physical damage, discoloration, or loose connections. Ensure the transparent casing is intact.
- Terminal Integrity: Check that the blade terminals are clean and free from corrosion. If necessary, gently clean them with a non-abrasive, electrical contact cleaner (with power off).
- د چاپیریال شرایط: ډاډ ترلاسه کړئ چې عملیاتي چاپیریال د ټاکل شوي تودوخې او رطوبت حدودو کې پاتې کیږي ترڅو د وخت څخه مخکې اغوستلو مخه ونیول شي.
- بدلول: Relays have a finite mechanical and electrical life. If the relay exhibits inconsistent operation, excessive heat, or visible contact pitting, it should be replaced.
6. ستونزه حل کول
If the RJ1S-C-D12 relay is not functioning as expected, consider the following common issues and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| د ریلې کویل انرژي نه ورکوي. | No 12 VDC power to coil; incorrect voltage; faulty coil. | Verify 12 VDC supply to coil terminals. Check wiring. Replace relay if coil is faulty. |
| Contacts do not switch or are intermittent. | Overload condition; worn contacts; insufficient coil voltage; dirty terminals. | Check load current against relay rating. Replace relay if contacts are worn. Verify stable 12 VDC coil voltage. Clean terminals. |
| Relay makes buzzing noise. | AC voltage applied to DC coil; loose connection; mechanical issue. | Ensure only 12 VDC is applied to the coil. Check for secure seating in socket. Replace relay if mechanical issue persists. |
| Relay overheats. | Overcurrent on contacts; excessive coil voltage; poor ventilation. | Reduce load current to within specifications. Verify coil voltage is 12 VDC. Ensure adequate airflow around the relay. |
7. مشخصات
| صفت | ارزښت |
|---|---|
| برانډ | ایډییک |
| د ماډل شمیره | RJ1S-C-D12 |
| Coil Voltage | 12 VDC |
| د اړیکو ډول | SPDT (واحد قطب دوه ګونی غورځول) |
| اوسنۍ درجه بندي | 12 Amps |
| اعظمي AC حجمtage | 250 VAC |
| Max DC Voltage | 30 VDC |
| د نصب کولو ډول | پلګ ان ماونټ |
| د نښلونکي ډول | Plug-In (Blade Terminals) |
| د توکي وزن | 3.2 اونس |
| جوړونکی | IDEC Corp. |
| نیټه لومړی شتون لري | د مارچ 16، 2014 |
8. تضمین او ملاتړ
For information regarding warranty, technical support, or service for your IDEC RJ1S-C-D12 Slim Power Relay, please contact IDEC Corp. directly through their official website or customer service channels. Keep your purchase receipt and product model number (RJ1S-C-D12) available when seeking support.
