محصول پای ته ورسیدview
The AEM DryFlow Air Filter is a high-performance, washable, and reusable synthetic air filter designed to optimize airflow and filtration for your vehicle. It requires no oil for maintenance, simplifying the cleaning process and ensuring durable service.
Image: AEM AE-07082 DryFlow Air Filter, showcasing its rectangular shape and red filter media.
کلیدي ځانګړتیاوې
- Designed to increase horsepower and throttle response.
- Captures up to 99% of harmful contaminants.
- Offers outstanding performance even in dusty racing conditions.
- په متحده ایالاتو کې تولید شوی.
انځور: تفصیلي view of the AEM DryFlow Air Filter highlighting its key components: 1. Dryflow Air Filter (synthetic media, no oil required), 2. OE Specific Molding (creates a tight seal), and 3. Aluminum Wire Meshing (straightens and smooths airflow).
Image: A white car on a road, representing the filter's design to increase horsepower.
Image: Close-up of the filter media, emphasizing that the product is 'MADE IN THE USA'.
نصب کول
This section provides general guidance for installing your AEM DryFlow Air Filter. For detailed, vehicle-specific instructions, please refer to the official installation manual provided by AEM.
د نصبولو رسمي لارښود (PDF) ډاونلوډ کړئ
د عمومي نصبولو مرحلې
- Locate your vehicle's airbox.
- Open the airbox and carefully remove the existing air filter.
- Insert the AEM DryFlow Air Filter into the airbox, ensuring the OE Specific Molding creates a tight seal.
- Close and secure the airbox lid.
- Verify all connections are secure before operating the vehicle.
Image: A hand demonstrating the ease of installation by placing the AEM DryFlow Air Filter into a vehicle's airbox.
ساتنه
The AEM DryFlow Air Filter is designed for easy maintenance and long service life. Unlike oiled filters, it requires no oil for cleaning.
د پاکولو لارښوونې
- Remove the air filter from the vehicle's airbox.
- Gently tap the filter to dislodge any loose debris.
- Rinse the filter with water from the clean side (inside) to the dirty side (outside) to push contaminants out.
- Use a mild, non-foaming detergent if necessary, and rinse thoroughly.
- Allow the filter to air dry completely before reinstallation. Do not use compressed air or heat to dry, as this may damage the filter media.
Image: The AEM DryFlow Air Filter being cleaned with water, demonstrating its washable and reusable nature without requiring oil.
Regular cleaning ensures optimal airflow and filtration performance.
مشخصات
| صفت | تفصیل |
|---|---|
| برانډ | AEM |
| ماډل | AE-07082 |
| د OEM برخې شمیره | AE-07082 |
| شکل | مستطیل |
| د توکي وزن | ۲.۴۵ پونډه |
| د فلټر مواد | Synthetic (Oil-Free) |
| د فلټر کولو موثریت | Captures up to 99% of harmful contaminants |
| د بیا کارولو وړتیا | د مینځلو او بیا کارولو وړ |
| د تولید ځای | USA |
انځور: نږدې انځور view of the thick 3D media, designed for increased airflow and dirt capacity.
د ستونزو حل کول
If you encounter issues with your AEM DryFlow Air Filter, consider the following common troubleshooting steps:
- کم شوی فعالیت: Ensure the filter is clean and free of excessive debris. A clogged filter can restrict airflow. Verify the filter is properly seated in the airbox, creating a tight seal.
- غیر معمولي غږونه: Check for proper installation. An improperly seated filter or airbox lid can cause air leaks and unusual sounds.
- د انجن څراغ وګورئ: While rare, an improperly installed air filter or a damaged Mass Air Flow (MAF) sensor during installation can trigger a check engine light. Re-check installation and consult a professional if the light persists.
- Filter Damage: Inspect the filter for any tears or damage to the media or molding. A damaged filter should be replaced to ensure proper filtration.
For persistent issues or specific technical support, please contact AEM customer service.
تضمین او ملاتړ
AEM products are manufactured to high standards. For information regarding product warranty, claims, or technical support, please refer to the official AEM webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکو خدماتو څانګې سره اړیکه ونیسئ.
