Deca 300300 Matic 116 Traditional Electronic Battery Charger User Manual

1. پیژندنه

This manual provides comprehensive instructions for the safe and efficient use of your Deca 300300 Matic 116 traditional electronic battery charger. Please read all instructions carefully before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. د خوندیتوب معلومات

Always observe the following safety precautions when using the battery charger:

• بریښنایی خوندیتوب: Ensure the charger is connected to a grounded outlet. Do not operate the charger with damaged cords or plugs. Avoid contact with water or wet surfaces.
• چاودیدونکي ګازونه: Batteries can produce explosive gases during charging. Ensure adequate ventilation in the charging area. Avoid open flames, sparks, and smoking near the battery.
• د سترګو او پوستکي ساتنه: Wear appropriate eye protection (safety glasses) and protective clothing when working with batteries. Battery acid is corrosive.
• ماشومان او غیر مجاز پرسونل: Keep the charger and battery out of reach of children. Do not allow untrained individuals to operate the charger.
• د بیټرۍ مطابقت: Only charge 12V lead-acid batteries (wet, AGM, gel) within the specified capacity range (5 Ah to 90 Ah). Do not attempt to charge non-rechargeable batteries or batteries with different voltages.
• وینټیلیشن: Ensure the charger itself has adequate ventilation during operation to prevent overheating.
• قطع کول: Always disconnect the AC power from the charger before disconnecting the battery clamps.

3. محصول ختم شوview

The Deca 300300 Matic 116 is a traditional electronic battery charger designed for 12V lead-acid automotive batteries. It features electronic control for charging current, automatic charge termination, and an automatic reset function. The charger is supplied with clamp connectors for easy attachment to battery terminals.

3.1. Charger Components

شکل 1: مخکی view of the Deca 300300 Matic 116 Battery Charger. This image shows the black, rectangular electronic battery charger with an integrated handle on top. The front panel features a prominent yellow and red label displaying 'MATIC 116', 'ELECTRONIC BATTERY CHARGER', '12V', 'min 5Ah', 'MAX 90Ah', and the 'deca' logo. To the left of the label are three LED indicators: a red LED (top) for error/reverse polarity, a yellow LED (middle) indicating charging ('CHARGE'), and a green LED (bottom) indicating charge complete ('OK'). Icons representing car and van batteries are also visible on the label.

The front panel includes indicator lights to show the charging status:

• سره LED: Indicates an error, such as reverse polarity connection or a faulty battery.
• Yellow LED (CHARGE): Illuminates when the battery is actively charging.
• Green LED (OK): Illuminates when the battery is fully charged and the charging process has terminated.

4. ترتیب کول

Follow these steps to set up your Deca 300300 Matic 116 charger:

1. چمتووالی: Ensure the battery is clean and free of corrosion on its terminals. If charging a wet lead-acid battery, check the electrolyte level and top up with distilled water if necessary, following the battery manufacturer's instructions.
2. وینټیلیشن: Place the battery and charger in a well-ventilated area.
3. Cl وصل کړئamps:
   • سره وصل کړئ سور (+) clamp ته مثبت (+) ټرمینل د بیټرۍ.
   • سره وصل کړئ تور (-) clamp ته منفي (-) ترمینل د بیټرۍ.

   مهم: Ensure correct polarity. Reverse polarity will trigger the red error LED.
4. د بریښنا سره نښلول: Plug the charger's power cord (CEE 7/16 Europlug) into a standard 230V AC, 50/60 Hz grounded electrical outlet.

5. عملیاتي لارښوونې

Once the charger is set up and connected, it will automatically begin the charging process:

1. چارج کول پیل کړئ: After connecting to the battery and power, the charger will automatically detect the battery and start charging. The yellow 'CHARGE' LED will illuminate.
2. د چارج څارنه: Allow the charger to operate until the green 'OK' LED illuminates. This indicates that the battery is fully charged and the charger has automatically terminated the charging process.
3. Charge Termination: The electronic control system ensures that the battery is not overcharged. Once the 'OK' LED is lit, the charger maintains the battery at an optimal level.
4. قطع کول:
   • لومړی، چارجر د AC بریښنا سایټ څخه خلاص کړئ.
   • Next, disconnect the black (-) clamp from the battery's negative terminal.
   • Finally, disconnect the red (+) clamp from the battery's positive terminal.

6. ساتنه

Regular maintenance ensures the longevity and optimal performance of your charger:

• پاکول: Disconnect the charger from both AC power and the battery before cleaning. Wipe the exterior of the charger with a dry or slightly damp ټوکر سخت کیمیاوي او محلول مه کاروئ.
• کیبل او Clamp معاینه: Periodically inspect the power cord, charging cables, and clamps for any signs of damage, fraying, or corrosion. Replace damaged components immediately.
• ذخیره کول: Store the charger in a cool, dry place when not in use. Keep it away from direct sunlight, moisture, and extreme temperatures.

7. ستونزه حل کول

If you encounter issues with your Deca 300300 Matic 116 charger, refer to the following table:

8. مشخصات

Key technical specifications for the Deca 300300 Matic 116 charger:

• نښه: ډیکا
• د ماډل شمیره: 300300
• د بریښنا رسول: ۱ ساعت - ۲۳۰ وولټ - ۵۰/۶۰ هرټز
• ننوتۍ جلدtage: 230 وولټ (AC)
• د بیټرۍ Voltage: 12 وی
• Average Charging Current: 4 A
• د مطابقت وړ بیټرۍ ډولونه: Lead-acid (wet, AGM, gel)
• د بیټرۍ د وړتیا حد: 5 Ah (minimum) to 90 Ah (maximum)
• د پلګ ډول: CEE 7/16 Europlug
• جوړونکی: ډیکا سپا

9. تضمین او ملاتړ

Information regarding specific warranty terms for the Deca 300300 Matic 116 is not available in this manual. For warranty claims, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly. Information on spare parts availability and software updates is not provided.