پیژندنه
This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject Audio Phono Box DC. This compact phono preamplifier is designed to enhance the audio signal from your turntable, making it compatible with line-level inputs on your amplifier or receiver. It supports both Moving Magnet (MM) and Moving Coil (MC) cartridges, offering versatility for various turntable setups.
شکل 1: مخکی view of the Pro-Ject Audio Phono Box DC in black.
د خوندیتوب معلومات
- Always disconnect the power adapter before cleaning or if the unit will not be used for an extended period.
- Do not expose the unit to rain or moisture. Avoid placing objects filled with liquid, such as vases, on the unit.
- د هوا مناسبه هوا ورکول ډاډمن کړئ. د هوا د بهېدو لارې مه بندوئ.
- Place the unit on a stable, level surface to prevent accidental falls.
- د تودوخې سرچینو لکه ریډیټرونو، د تودوخې راجسترونو، بخاریو، یا نورو وسایلو (په شمول د) ته نږدې د واحد له ځای پرځای کولو څخه ډډه وکړئ. ampلایفیر) چې تودوخه تولیدوي.
- یوازې د تولید کونکي لخوا چمتو شوي بریښنا رسولو څخه کار واخلئ.
- د واحد د خدمت کولو هڅه مه کوئ. ټول خدمتونه وړ خدماتو پرسونل ته راجع کړئ.
د بسته محتويات
مهرباني وکړئ وګورئ چې ستاسو په کڅوړه کې لاندې توکي شامل دي:
- Pro-Ject Audio Phono Box DC unit
- DC power adapter (18V)
- د لارښوونې لارښود
که کوم توکي ورک یا زیانمن شوي وي، مهرباني وکړئ سمدلاسه خپل پرچون پلورونکي سره اړیکه ونیسئ.
چمتو کول
Follow these steps to correctly set up your Phono Box DC:
- ځای په ځای کول: Position the Phono Box DC near your turntable and amplifier. Its compact size allows for flexible placement.
- Cartridge Type Selection: Locate the MM/MC switch on the rear panel of the Phono Box DC. Set it according to your turntable's cartridge type (Moving Magnet or Moving Coil). Ensure this is set correctly for optimal sound quality.
- Connect Turntable to Input: Connect the RCA output cables from your turntable to the "In" (Left and Right) RCA inputs on the rear of the Phono Box DC.
- د ځمکني تار سره نښلول: Connect the ground wire from your turntable to the ground terminal on the Phono Box DC. This is crucial for minimizing hum and noise.
- Connect Output to Ampژوندی: Connect the "Out" (Left and Right) RCA outputs from the Phono Box DC to a line-level input on your amplifier or receiver (e.g., "Aux", "CD", "Line In"). Do NOT connect it to an amplifier's dedicated "Phono" input, as this would result in over-amplification and distortion.
- بریښنا وصل کړئ: Connect the supplied 18V DC power adapter to the "Power 18V===" input on the rear of the Phono Box DC, then plug the adapter into a suitable power outlet.
شکل 2: شاته view showing input, output, MM/MC switch, ground terminal, and power input.
عملیات
Once all connections are made and the power is supplied, the Phono Box DC is ready for operation. There are no additional controls on the unit beyond the MM/MC switch. Simply select the correct cartridge type, and the unit will automatically process the audio signal from your turntable.
- خپل ځان ډاډمن کړئ amplifier is set to the correct input channel where the Phono Box DC is connected.
- د خپل په کارولو سره حجم تنظیم کړئ ampد ژوند کوونکي کنټرولونه.
ساتنه
The Pro-Ject Audio Phono Box DC requires minimal maintenance:
- پاکول: د واحد بهرنۍ برخه پاکولو لپاره نرم، وچ ټوکر وکاروئ. مایع پاکوونکي یا محلول مه کاروئ.
- دوړې: Keep the unit free from dust accumulation, which can affect performance and lifespan.
- اړیکې: په دوره یي ډول د کیبل ټولې اړیکې وګورئ ترڅو ډاډ ترلاسه شي چې دوی خوندي او له زنګ څخه پاک دي.
د ستونزو حل کول
If you encounter issues with your Phono Box DC, refer to the following common problems and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| هیڅ غږ یا ډیر ټیټ حجم | Incorrect connections, MM/MC switch setting, power issue, ampژوندی داخل. |
|
| تحریف شوی یا ناڅرګند غږ | Incorrect MM/MC switch setting, faulty cables, damaged cartridge. |
|
| د ګونګېدو یا ګونګېدو غږ | Improper grounding, interference, faulty cables. |
|
مشخصات
| فیچر | تفصیل |
|---|---|
| برانډ | پرو-جیکٹ |
| د ماډل شمیره | 13072 |
| د محصول ابعاد (L x W x H) | 2.95 x 4.21 x 2.83 انچه |
| د توکي وزن | ۲.۴۵ پونډه |
| مواد | فلزي |
| والیtage | 120V |
| اعظمي عرضه کول Voltage | 9.5 ولټه |
| لږترلږه عرضه کولtage | 9.5 وولټ (AC) |
| د چینلونو شمیر | 1 |
| د مشخصاتو ملاقات | RIAA Response Accuracy 0.5dB (20-20,000 Hz), THD 0.01% (MM), THD 0.05% (MC) |
د تضمین معلومات
Pro-Ject Audio Systems products are covered by a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For detailed warranty information, it is recommended to visit the official Pro-Ject Audio Systems webسایټ ته مراجعه وکړئ یا خپل مجاز پلورونکي سره اړیکه ونیسئ.
ملاتړ
Should you require further assistance or have questions not covered in this manual, please contact:
- Your authorized Pro-Ject Audio Systems retailer.
- Pro-Ject Audio Systems customer support via their official webسایټ: www.project-audio.com
کله چې د ملاتړ سره اړیکه ونیسئ، مهرباني وکړئ د خپل محصول ماډل شمیره (13072) او د پیرود توضیحات چمتو ولرئ.
