1. محصول ختم شوview
The Graco 288489 Contractor Airless Paint Spray Gun and Hose Kit is designed as an accessory package for a complete airless paint spray unit. This kit provides essential components for efficient and professional paint application.
It includes a high-quality spray gun, an airless hose, a built-in swivel on the handle for improved maneuverability, an in-line filter to prevent clogs, and a whip hose for added flexibility during operation.

انځور 1.1: Components of the Graco 288489 Contractor Airless Paint Spray Gun and Hose Kit. This image displays the airless spray gun, the long airless hose, and a smaller whip hose, along with a spray tip, illustrating the complete kit contents.
2. د خوندیتوب معلومات
WARNING: Read and understand all safety warnings and instructions before operating this equipment. Failure to follow warnings and instructions may result in electric shock, fire, serious injury, or death.
- د لوړ فشار خطر: Airless spray equipment operates at extremely high pressures. Paint can inject into the skin and cause severe injury. Never point the gun at yourself or others. Always engage the trigger lock when not spraying.
- د اور وژنې مواد: Many paints and solvents are flammable. Operate in a well-ventilated area, away from ignition sources such as pilot lights, open flames, and sparks. Do not smoke while spraying.
- شخصي محافظتي تجهیزات (PPE): Always wear appropriate PPE, including safety glasses or goggles, gloves, and a respirator or mask suitable for paint fumes.
- بریښنایی خوندیتوب: Ensure the sprayer unit (not included in this kit) is properly grounded. Do not operate in wet conditions.
- د نلی بشپړتیا: Regularly inspect hoses for cuts, bulges, or damage. Never use damaged hoses.
- د فشار کمول: د تجهیزاتو د هرې برخې پاکولو، چک کولو یا خدمت کولو دمخه تل په سیسټم کې فشار کم کړئ.
3. د بسته محتويات
ډاډ ترلاسه کړئ چې ټول توکي ستاسو په کټ کې شتون لري:
- Graco Contractor Airless Spray Gun
- RAC X 517 Reversible Spray Tip
- 50-foot Airless Paint Hose
- Built-in Swivel on Gun Handle
- In-line Gun Filter
- د څپو نلی
۴. د تنظیم لارښوونې
This kit is an accessory for an existing airless paint sprayer. Ensure your sprayer unit is off and depressurized before beginning assembly.
- Connect Main Airless Hose: Securely attach one end of the 50-foot airless paint hose to the high-pressure outlet of your airless sprayer unit. Use appropriate wrenches to ensure a tight, leak-free connection.
- Connect Whip Hose (Optional): If using the whip hose for added flexibility, connect one end to the free end of the 50-foot airless hose.
- د سپرې ټوپک سره وصل کړئ: Attach the Graco Contractor Airless Spray Gun to the free end of the whip hose (if used) or directly to the 50-foot airless hose. Ensure the connection is secure and leak-free. The built-in swivel on the gun handle allows for easier movement.
- Install In-line Filter: The in-line filter is typically pre-installed in the gun handle. Verify it is clean and properly seated. This filter helps prevent tip clogs.
- Install RAC X Spray Tip: Insert the RAC X 517 reversible spray tip into the tip guard on the front of the spray gun. Secure the tip guard by rotating it until it locks into place. Ensure the tip is oriented correctly for spraying (not in the unclogging position).
- Prepare Sprayer Unit: Follow your airless sprayer unit's instructions for filling with paint and priming the system. Ensure all air is purged from the system before spraying.
5. عملیاتي لارښوونې
Once the system is primed and ready, follow these guidelines for effective spraying:
- ټیسټ سپری: Always perform a test spray on a piece of cardboard or scrap material to check the spray pattern and adjust pressure as needed.
- واټن ساتل: Hold the spray gun approximately 10-12 inches (25-30 cm) from the surface. Maintain a consistent distance for an even finish.
- دوامداره حرکت: Move your entire arm, not just your wrist, to keep the gun perpendicular to the surface. Overlap each pass by about 50% to ensure full coverage.
- د محرک کنټرول: Begin moving the gun before pulling the trigger and release the trigger before stopping movement. This prevents paint buildup at the start and end of each pass.
- د فشار تنظیمول: Adjust the pressure on your airless sprayer unit to achieve a soft, feathered spray pattern without tails (uneven edges). Too low pressure will result in tails; too high pressure wastes paint and increases overspray.
- د محرک قفل: Always engage the trigger lock when pausing or moving the gun to prevent accidental discharge.
6. ساتنه
Proper maintenance extends the life of your equipment and ensures optimal performance.
- د هر استعمال وروسته پاکول: Immediately after spraying, flush the system with the appropriate cleaning solution (water for latex, mineral spirits for oil-based paints). Follow your sprayer unit's cleaning instructions.
- Gun Cleaning: Disassemble the gun (remove tip, tip guard, and filter) and clean all components thoroughly. The totally enclosed needle design helps eliminate exposure to fluid and extends needle life.
- د ساتنې لارښوونې: If the spray tip clogs during use, reverse the tip to clear the obstruction, then return it to the spray position. Clean the tip thoroughly after each use.
- د فلټر پاکول: Remove and clean the in-line gun filter. Replace if damaged or excessively clogged.
- د نلی پاملرنه: Flush the hose thoroughly. Store the hose coiled neatly, avoiding kinks or sharp bends.
- ذخیره کول: Store the gun and hose in a clean, dry place, protected from freezing temperatures if using water-based materials.
7. ستونزه حل کول
دلته عامې ستونزې او د هغوی حل لارې دي:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| د سپرې ضعیفه بڼه / لکۍ | Pressure too low; Worn or clogged tip; Material too thick. | Increase pressure; Reverse and clear tip, or replace tip; Thin material if recommended by manufacturer. |
| Gun Clogging | Dirty material; Clogged filter; Worn tip. | Filter paint; Clean or replace in-line filter; Replace tip. |
| Leaking from Gun or Hose | Loose connections; Damaged seals/O-rings; Damaged hose. | Tighten connections; Replace seals/O-rings; Replace damaged hose. |
| Gun Spitting | Air in system; Loose tip guard; Worn needle packing. | Re-prime system to remove air; Tighten tip guard; Consult a service technician for needle packing replacement. |
For issues not listed, refer to your main airless sprayer unit's manual or contact Graco customer support.
8. مشخصات
- نښه: ګراکو
- د ماډل شمیره: 288489
- مواد: پلاستیک، سټینلیس فولاد
- رنګ: څو رنګه
- د توکي وزن: ۰.۴۵ پونډه (تقریبا ۰.۴ کیلوګرامه)
- اعظمي فشار: 3300 PSI (پونډ په هر مربع انچ)
- Item Length (Hose): ۶ فوټه (تقریبا ۱.۸ متره)
- UPC: 633955215498
- ځانګړي ځانګړتیاوې: Airless, Totally enclosed needle design, Built-in swivel on handle
9. تضمین او ملاتړ
For specific warranty information regarding your Graco 288489 Contractor Airless Paint Spray Gun and Hose Kit, please refer to the documentation provided with your purchase or visit the official Graco webسایټ. د تضمین شرایط معمولا د یوې ټاکلې مودې لپاره د تولید نیمګړتیاوې پوښي.
For technical support, parts, or service inquiries, please contact Graco customer service directly. You can usually find contact information on the Graco webپه سایټ کې یا د اصلي محصول بسته بندۍ کې.
د ګراکو رسمي Webسایټ: www.graco.com





