ټیسټو 0560 8312 830-T1 IR ترمامیتر لارښوونې لارښود

1. پیژندنه

This manual provides essential instructions for the safe and effective use of the Testo 0560 8312 830-T1 IR Thermometer. This device is designed for non-contact measurement of surface temperatures in various industrial and trade applications. It features 12:1 optics and a dual laser for precise targeting, allowing for accurate temperature readings even on smaller objects from a safe distance.

2. د خوندیتوب معلومات

Please read this section carefully before operating the device to ensure safe and proper use.

• Do not point the laser directly into eyes or at other people.
• وسیله په چاودیدونکي فضا کې مه کاروئ.
• Protect the device from extreme temperatures, impacts, and strong vibrations.
• وسیله پاکه او وچه وساتئ.
• Only use the device for its intended purpose as described in this manual.
• ترمیم باید یوازې د مجاز پرسونل لخوا ترسره شي.

3. محصول ختم شوview

The Testo 830-T1 IR Thermometer is a handheld device designed for quick and accurate non-contact temperature measurements.

Figure 1: Testo 830-T1 Infrared Thermometer with included battery.

شکل 2: مخکی view of the Testo 830-T1, showing the display, measurement trigger, and control buttons.

3.1 اجزا

• انفراریډ سینسر: Located at the front of the device, used for non-contact temperature measurement.
• دوه ګونی لیزر اشارې: Two laser dots indicate the measurement spot size.
• ښکاره کول: Shows temperature readings, measurement units, battery status, and other indicators.
• د اندازه کولو محرک: اندازه کول او لیزر فعالوي.
• د کنټرول تڼۍ: For navigating menus, adjusting settings (e.g., emissivity, units), and accessing functions like MIN/MAX.
• د بیټرۍ کڅوړه: د بیټرۍ نصبولو لپاره په لاسي کې موقعیت لري.

4. ترتیب کول

4.1 د بیټرۍ نصب کول

1. د ترمامیتر په لاستی کې د بیټرۍ د برخې پوښ ومومئ.
2. پوښ خلاص کړئ.
3. Insert two AAA batteries, ensuring correct polarity (+/-). The device requires 2 AAA batteries, which are included.
4. د بیټرۍ کمپارټ پوښ په خوندي ډول وتړئ.

4.2 Initial Power-On and Unit Selection

Upon first use or after battery replacement, the device will power on. You may need to select your preferred temperature unit (Celsius or Fahrenheit).

• To change units: Typically, this involves pressing and holding a specific button (often the 'Mode' or 'Set' button, or an arrow button) while the device is off, then powering it on, or accessing a menu option. Refer to the on-screen prompts or the official Testo documentation for the exact procedure for your specific device firmware, as methods can vary.

5. عملیاتي لارښوونې

5.1 اندازه کول

1. انفراریډ سینسر د هدف څیز په لور وښایاست.
2. Press and hold the measurement trigger. The dual laser pointers will activate, indicating the measurement spot.
3. د تودوخې لوستل به په نندارتون کې څرګند شي.
4. Release the trigger to hold the last measured value (HOLD function).

Figure 3: The Testo 830-T1 in use, measuring the surface temperature of a radiator.

5.2 Understanding 12:1 Optics and Dual Laser

The 12:1 optics mean that at a distance of 12 inches, the measurement spot diameter is 1 inch. The dual laser pointers converge at the center of this measurement spot, helping you accurately identify the area being measured. This is particularly useful for measuring smaller objects or from a greater distance.

۷.۰ دقیقې/ اعظمي فعالیت

The device can display the minimum and maximum temperatures recorded during a continuous measurement. This function is useful for monitoring temperature fluctuations over a period.

• To activate MIN/MAX: Press the appropriate button (refer to your device's specific button layout, often an arrow or 'Mode' button) while taking a measurement. The display will cycle through current, minimum, and maximum values.

۴.۵ د خپریدو تنظیم

Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. For accurate readings, adjust the emissivity setting on your thermometer to match the material being measured. Common emissivity values:

• 0.95 (default for many devices): Most organic materials, painted surfaces, water, plastic.
• 0.85-0.90: Concrete, brick, rough wood.
• 0.60-0.70: Polished metals (can vary significantly).

Consult an emissivity table for specific materials. Incorrect emissivity settings will lead to inaccurate temperature readings.

6. ساتنه

6.1 پاکول

د غوره فعالیت او اوږد عمر ډاډمن کولو لپاره، وسیله پاک وساتئ.

• Wipe the device exterior with a clean, damp ټوکر د کثافاتو پاکوونکي یا محلول مه کاروئ.
• Carefully clean the infrared lens with a soft, lint-free cloth or a lens cleaning wipe. Avoid scratching the lens.

6.2 د بیټرۍ بدلول

When the battery indicator on the display shows low power, replace the batteries promptly to avoid interruption of operation. Follow the battery installation steps in Section 4.1.

6.3 ذخیره کول

Store the thermometer in a dry, dust-free environment within the recommended temperature range (refer to specifications). If storing for extended periods, remove the batteries to prevent leakage.

7. ستونزه حل کول

If you encounter issues with your Testo 830-T1, refer to the following common problems and solutions:

• وسیله نه فعالیږي:
  • Check if batteries are correctly inserted with proper polarity.
  • بیټرۍ د نویو سره بدل کړئ.
• ناسم لوستل:
  • Ensure the infrared lens is clean.
  • ډاډ ترلاسه کړئ چې د اخراج ترتیب د هدف موادو سره سمون لري.
  • Ensure the measurement distance is appropriate for the target size (12:1 optics).
  • د شیشې یا ډیر انعکاس کونکي سطحو له لارې د اندازه کولو څخه ډډه وکړئ.
• لیزر نه لیدل کیږي:
  • د بیټرۍ کچه چیک کړئ.
  • Ensure the measurement trigger is pressed.

If problems persist, contact Testo customer support for assistance.

8. مشخصات

9. تضمین او ملاتړ

For warranty information, technical support, or service inquiries, please contact Testo SE & Co. directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's official webسایټ

جوړونکی: Testo SE & Co.

مهرباني وکړئ د تضمین ادعاګانو لپاره د پیرود ثبوت وساتئ.