Flysky FS-R9B 2.4G 8-Channel Receiver Instruction Manual

1. پیژندنه او وروستهview

This manual provides detailed instructions for the proper setup, operation, and maintenance of your Flysky FS-R9B 2.4G 8-channel receiver. The FS-R9B receiver is designed for use with Flysky FS-TH9X 9-channel transmitters and is suitable for various RC models, including gliders, helicopters, and airplanes. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

انځور 1.1: مخکی view of the Flysky FS-R9B 8-channel receiver, showing the model number, CE certification, and channel labels.

2. ځانګړتیاوې

• ۷ چینلونه: Supports up to 8 independent control channels.
• 2.4G AFHDS System: Utilizes Flysky's Automatic Frequency Hopping Digital System for reliable communication.
• پراخه مطابقت: Designed for RC gliders, helicopters, and airplanes.
• لوړ ریزولوشن: 1024-step resolution for precise control.
• Robust RF Range: Operates within the 2.40-2.48GHz frequency band.
• کمپیکٹ او لږ وزن: Small form factor (42.7 x 27 x 15mm) and light weight (11.3g) for easy integration.
• پراخه ان پټ حجمtage: Supports 4.5-6.5V DC input power.
• تصدیق شوی: CE and FCC certified for quality and safety.

3. مشخصات

4. Setup and Binding

The binding process establishes a secure communication link between your Flysky FS-TH9X transmitter and the FS-R9B receiver. This procedure must be performed correctly for the system to operate.

انځور ۳.۱: نږدې انځور view of the Flysky FS-R9B receiver's channel ports (CH1-CH8) and the BIND/BAT port.

Image 4.2: The bind plug, used to initiate the binding process on the receiver.

د پابندۍ کړنلاره:

1. د لیږدونکي چمتو کول: Ensure your Flysky FS-TH9X transmitter is powered off.
2. Connect Bind Plug: Insert the bind plug (as shown in Image 4.2) into the 'BIND/BAT' port on the FS-R9B receiver (refer to Image 4.1).
3. Power Receiver: Connect a power source (4.5-6.5V DC) to any other channel port on the receiver. The receiver's LED indicator should start flashing rapidly, indicating it is in binding mode.
4. Activate Transmitter Binding: While holding the 'BIND' button on your FS-TH9X transmitter, power on the transmitter. Continue holding the 'BIND' button until the receiver's LED changes its behavior (e.g., stops flashing rapidly and becomes solid or flashes slowly).
5. Verify Binding: Once the receiver's LED indicates successful binding (usually a solid light), release the 'BIND' button on the transmitter.
6. د بانډ پلګ لرې کړئ: Power off the receiver, then remove the bind plug from the 'BIND/BAT' port.
7. د ازموینې سیسټم: Power on the transmitter first, then the receiver. The receiver's LED should illuminate solidly, indicating a successful connection. Test all control surfaces and functions to ensure proper operation.

If the binding process fails, repeat the steps carefully. Ensure both the transmitter and receiver are within close proximity during binding.

Image 4.3: The FS-R9B receiver with its antenna extended and a bind plug inserted into the BIND/BAT port, ready for the binding process.

5. عملیاتي لارښوونې

After successful binding, connect your servos, Electronic Speed Controllers (ESCs), and other components to the appropriate channels on the FS-R9B receiver.

Image 5.1: The FS-R9B receiver showing its antenna and the clearly labeled channel ports (CH1-CH8) for connecting various RC components.

د پیوستون لارښود:

• چینل 1 (CH1): Typically Aileron
• چینل 2 (CH2): Typically Elevator
• چینل 3 (CH3): Typically Throttle (connect ESC here)
• چینل 4 (CH4): Typically Rudder
• Channels 5-8 (CH5-CH8): Auxiliary channels for flaps, landing gear, lights, etc.
• BIND/BAT Port: Used for binding and can also serve as an additional power input if not used for binding.

Powering On/Off Sequence:

1. Always power on your transmitter first.
2. Then, power on your اخیستونکی (via the ESC or a dedicated battery).
3. When powering off, always power off your receiver first.
4. Then, power off your لیږدونکی.

Following this sequence prevents unintended control inputs or loss of control during power cycles.

6. ساتنه

Proper maintenance ensures the longevity and reliable performance of your FS-R9B receiver.

• پاک ساتل: Regularly clean the receiver's exterior with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• د عناصرو څخه ساتنه: Shield the receiver from moisture, dust, and extreme temperatures. Consider using a waterproof enclosure if operating in damp شرایط
• خوندي نصب کول: Ensure the receiver is securely mounted within your model to prevent vibrations from affecting its performance or causing damage. Use foam or double-sided tape to dampvibrations
• د انتن ځای پرځای کول: Position the antenna away from metal objects and carbon fiber structures to maximize signal reception. Ensure the antenna is not kinked or damaged.
• اړیکې معاینه کړئ: Periodically check all wire connections to the receiver for looseness or damage.

7. ستونزه حل کول

If you encounter issues with your FS-R9B receiver, refer to the following troubleshooting guide:

8. د خوندیتوب معلومات

Operating RC equipment requires adherence to safety guidelines to prevent injury or damage.

• Always operate RC models in open areas, away from people, animals, and property.
• Ensure all batteries are fully charged before operation.
• Perform a range check before each flight or operation.
• Never operate RC models near power lines, roads, or airports.
• Keep hands and loose clothing away from propellers and moving parts.
• If you are new to RC, seek guidance from experienced hobbyists or join a local RC club.
• دا محصول د 14 کلونو او پورته عمر لرونکو کاروونکو لپاره سپارښتنه کیږي.

9. تضمین او ملاتړ

For warranty information or technical support regarding your Flysky FS-R9B receiver, please refer to the documentation provided with your purchase or contact Flysky customer service directly. Keep your proof of purchase for warranty claims.