1. پیژندنه
This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of the Legrand 412544 CX3 Contactor. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed for controlling electrical circuits, typically for switching loads in residential, commercial, or industrial applications.
2. د خوندیتوب معلومات
خبرداری: Electrical installation and maintenance should only be performed by qualified and authorized personnel. Failure to follow these instructions can result in electric shock, fire, or serious injury.
- Always disconnect power at the main circuit breaker or fuse box before installing, servicing, or removing the contactor.
- ډاډ ترلاسه کړئ چې ټول تارونه د محلي او ملي بریښنا کوډونو سره مطابقت لري.
- والیت تایید کړئtage and current ratings of the contactor are suitable for the intended application.
- Do not operate the contactor if it appears damaged.
- د نصب او ساتنې پرمهال مناسب شخصي محافظتي تجهیزات (PPE) وکاروئ.
3. محصول ختم شوview
The Legrand 412544 CX3 Contactor is a modular device designed for DIN rail mounting. It features two Normally Open (NO) contacts and is rated for 25 Amperes at 230-250 Volts AC. The contactor includes a manual override function for testing or temporary operation.
شکل 1: Legrand 412544 CX3 Contactor. This image displays the Legrand 412544 CX3 Contactor. Visible features include the 25A rating, 250V operating voltage, and the Legrand brand logo. The front panel shows the manual override lever with 'AUTO' and 'O' (Off) positions, and screw terminals labeled A1, A2 for the coil, and 1, 2, 3, 4 for the main contacts.
کلیدي ځانګړتیاوې:
- د اړیکو ډول: 2 Normally Open (NO) contacts
- Rated Current (I max): 25 A
- د عملیاتو Voltage (Ue): 230-250 V AC
- کنټرول Voltage: 230 V AC
- د ماډلونو شمیر: 1 (for DIN rail mounting)
- عملیاتي حالت: آن - بند
- د ترمینل ډول: سکرو ترمینلونه
- د فعال ډول: پسټون
- د اړیکې توکي: د الماس فولاد
4. ترتیب او نصب کول
Before proceeding, ensure power is disconnected as per Section 2, "Safety Information."
4.1 پورته کول
- Locate an appropriate position on a standard DIN rail within an electrical enclosure.
- Clip the contactor onto the DIN rail. Ensure it is securely fastened.
4.2 تارونه
The contactor features screw terminals for secure electrical connections. Refer to the markings on the device for correct wiring.
- Coil Terminals (Control Circuit): د کنټرول حجم سره وصل کړئtage (230V AC) to terminals A1 او A2. A1 is typically for the phase/live wire, and A2 for the neutral.
- Main Contacts (Power Circuit):
- Connect the incoming power supply to terminals 1 او 3.
- Connect the load to terminals 2 او 4.
- ډاډ ترلاسه کړئ چې ټولې اړیکې ټینګې او خوندي دي ترڅو د تماسونو د خلاصیدو او ډیر تودوخې مخه ونیول شي.
- Double-check all wiring against the electrical diagram of your installation before restoring power.
5. عملیاتي لارښوونې
Once installed and wired correctly, the contactor operates by applying voltage to its control coil (A1-A2).
- اتوماتیک عملیات: کله چې د کنټرول حجمtage (230V AC) is applied to terminals A1 and A2, the contactor coil energizes, closing the main contacts (1-2 and 3-4). This allows power to flow to the connected load. When the control voltage لرې کیږي، کویل غیر انرژي کیږي، او اړیکې خلاصیږي، بار قطع کیږي.
- لاسي بیارغونه: The contactor is equipped with a manual override lever on the front panel.
- Move the lever to the 'AUTO' position for normal automatic operation via the control circuit.
- Move the lever to the 'O' (Off) position to manually open the contacts, regardless of the control circuit status. This can be used for maintenance or to ensure the load remains off.
- Some models may also feature a manual 'ON' position for continuous closure of contacts, independent of the control circuit. Refer to the specific markings on your device.
6. ساتنه
The Legrand 412544 CX3 Contactor is designed for reliable, long-term operation with minimal maintenance. However, periodic checks are recommended.
- بصری معاینه: Periodically inspect the contactor for any signs of physical damage, discoloration, or loose connections.
- د پای ټینګښت: Ensure all screw terminals remain tight. Loose connections can lead to overheating and potential failure.
- پاکول: If necessary, gently clean the exterior of the contactor with a dry, lint-free cloth. Do not use liquids or abrasive cleaners.
- د فعالیت چک: With power disconnected from the load circuit, test the manual override function to ensure smooth operation.
مهم: د هر ډول ساتنې ترسره کولو دمخه تل بریښنا قطع کړئ.
7. ستونزه حل کول
If the contactor is not functioning as expected, consider the following common issues and solutions:
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| تماس کوونکی انرژي نه ورکوي (تماسونه نه تړل کیږي) |
|
|
| Contactor energizes but load does not receive power |
|
|
| Contactor makes humming noise |
|
|
If problems persist after attempting these solutions, contact a qualified electrician or Legrand customer support.
8. مشخصات
| برانډ | Legrand |
| د ماډل شمیره | 412544 |
| Rated Current (I max) | 25 A |
| د عملیاتو Voltage (Ue) | 230-250 V AC |
| کنټرول Voltage | 230 V AC |
| د اړیکو ډول | 2 په نورمال ډول خلاص (نه) |
| د ماډولونو شمېر | 1 |
| عملیاتي حالت | آن - بند |
| د ترمینل ډول | سکرو ترمینلونه |
| د سرکټ ډول | ۳۲-لاره |
| د فعالیت ډول | پسټون |
| د تماس مواد | د الماس فولاد |
| پورته کول | DIN ریل |
9. تضمین او ملاتړ
For information regarding product warranty, technical support, or service, please refer to the official Legrand website or contact your local Legrand distributor. Keep your purchase receipt as proof of purchase.
Legrand Webسایټ: www.legrand.com
