Akasa AK-CC7122EP01 Low Profile د CPU کولر لارښوونې لارښود

1. محصول ختم شوview

The Akasa AK-CC7122EP01 is an ultra-compact, low-profile CPU cooler designed for Intel processors. Its efficient design makes it suitable for mini-ITX, HTPC, and Small Form Factor (SFF) systems where space is limited. The cooler features an aluminum heatsink and an integrated 75mm PWM fan for effective heat dissipation and quiet operation.

This cooler is compatible with Intel LGA775, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156), and LGA1200 sockets. It comes with pre-applied high-performance thermal compound for convenient installation.

Figure 1: Akasa AK-CC7122EP01 Low Profile CPU Cooler, top view.

2. ځانګړتیاوې

• Ultra-compact and low noise design for Intel Core 2 Duo and Core i3 CPUs.
• Total height of only 26mm, ideal for mini-ITX, micro-ATX, HTPC, and SFF systems.
• Aluminum heatsink and EBR bearing fan for high efficiency and extended lifespan.
• Multi-directional aluminum heatsink design maximizes heat dissipation.
• PWM fan provides optimal CPU, motherboard, and VRM cooling with minimal noise levels.
• Intel-approved pushpins ensure easy installation, reliable retention, and maximum compatibility on LGA775, LGA115X, and LGA1200 platforms.
• Pre-applied high-performance thermal compound for a clean and straightforward installation.

3. د بسته محتويات

د نصبولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:

• Akasa AK-CC7122EP01 CPU Cooler with integrated 75mm PWM fan
• Pre-applied thermal compound on the heatsink base
• Intel-compatible pushpin mounting mechanism (pre-attached)

4. ترتیب او نصب کول

Follow these steps carefully to install your Akasa AK-CC7122EP01 CPU cooler. Ensure your system is powered off and disconnected from the power source before beginning.

4.1 چمتو کول

1. Ensure your motherboard is compatible with Intel LGA775, LGA115x, or LGA1200 sockets.
2. If replacing an existing cooler, carefully remove it and clean any old thermal paste from the CPU surface using an appropriate cleaner.
3. The AK-CC7122EP01 comes with thermal compound pre-applied to its base. Do not touch this surface.

Figure 2: Heatsink base with pre-applied thermal compound.

4.2 Cooler Installation

1. Align the four pushpin legs of the cooler with the four mounting holes around the CPU socket on your motherboard.
2. Ensure the pushpins are in the 'unlocked' position (the arrow on the top of each pin should point away from the center of the pin).
3. Gently press down on the top of each pushpin in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until you hear a click. This indicates the pin has engaged with the motherboard.
4. Verify that all four pushpins are securely fastened and the cooler is firmly seated on the CPU. The arrows on the pushpins should now point towards the center of the pin, indicating the 'locked' position.

Figure 3: Close-up of an Intel-compatible pushpin mechanism.

4.3 د فین اتصال

1. Locate the 4-pin PWM fan connector on your motherboard, typically labeled 'CPU_FAN'.
2. Connect the cooler's 4-pin fan cable to the 'CPU_FAN' header on the motherboard. Ensure the connector is oriented correctly.

Installation is now complete. You may proceed to reassemble your system and power it on.

5. عملیاتي لارښوونې

The Akasa AK-CC7122EP01 CPU cooler operates automatically once connected to the motherboard's 4-pin PWM CPU fan header. The motherboard will control the fan speed based on the CPU temperature, ensuring optimal cooling performance and minimal noise.

• د PWM فعالیت: The fan speed will dynamically adjust from a minimum RPM (for quiet operation during low load) to a maximum RPM (for efficient cooling during high load).
• د BIOS/UEFI ترتیبات: You can typically monitor and sometimes adjust fan curves within your motherboard's BIOS/UEFI settings. Refer to your motherboard manual for specific instructions.

6. ساتنه

منظم ساتنه ستاسو د CPU کولر غوره فعالیت او اوږد عمر ډاډمن کولو کې مرسته کوي.

• د دوړو لرې کول: Periodically (e.g., every 3-6 months), power off your system and disconnect it from the power source. Use compressed air to gently blow dust out of the heatsink fins and fan blades. Hold the fan blades to prevent them from spinning excessively during cleaning.
• حرارتي مرکب: The pre-applied thermal compound is designed for long-term use. Reapplication is generally not necessary unless the cooler is removed from the CPU. If the cooler is removed, clean both the CPU and heatsink surfaces thoroughly and apply a new layer of high-quality thermal compound before reinstallation.
• د فین معاینه: Check the fan for any obstructions or unusual noises during operation. If the fan becomes excessively noisy or stops spinning, it may require replacement.

7. ستونزه حل کول

که تاسو د خپل CPU کولر سره ستونزې سره مخ شئ، نو لاندې عام د ستونزو حل کولو مرحلو ته مراجعه وکړئ:

• د CPU لوړه تودوخه:
  • Ensure the cooler is securely mounted and all four pushpins are locked.
  • Verify the fan cable is correctly connected to the 'CPU_FAN' header on the motherboard.
  • Check for excessive dust buildup on the heatsink or fan. Clean if necessary.
  • Confirm that the fan is spinning when the system is powered on.
• پنکه نه ګرځېږي:
  • د مدر بورډ سره د فین کیبل اتصال وګورئ.
  • Inspect the fan for any physical obstructions.
  • Test the fan on a different fan header if available, or consult your motherboard manual for fan control settings in BIOS/UEFI.
• د فین ډیر شور:
  • Clean any dust from the fan blades and heatsink.
  • ډاډ ترلاسه کړئ چې هیڅ کیبل د فین تیغونو سره مداخله نه کوي.
  • Check BIOS/UEFI settings for fan speed control; adjust fan curve if possible to reduce noise at lower temperatures.

8. مشخصات

9. تضمین او ملاتړ

Akasa products are manufactured to high standards and are covered by a manufacturer's warranty against defects in materials and workmanship. Specific warranty terms and duration may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or further assistance, please visit the official Akasa webسایټ ته مراجعه وکړئ یا خپل محلي پرچون پلورونکي سره اړیکه ونیسئ.

آنلاین سرچینې: For the latest drivers, FAQs, and product information, please visit www.akasa.com.tw.