IGS-801M صنعتي SNMP سویچ کارن لارښود

1. محصول ختم شوview

The Planet IGS-801M is an 8-Port 10/100/1000Base-TX Industrial SNMP Switch designed for robust network connectivity in harsh environments. Featuring an IP30 aluminum case, it supports a wide operating temperature range from -40 to 75 degrees Celsius, making it suitable for industrial applications requiring high reliability and performance.

شکل 1: مخکی view of the IGS-801M Industrial SNMP Switch. This image displays the compact, rugged design with eight Gigabit Ethernet ports and status LEDs for power, fault, link, and activity.

2. کلیدي ځانګړتیاوې

• ۸-پورټ ګیګابایټ ایترنیټ: Provides 8 x 10/100/1000Base-TX RJ45 ports for high-speed network connections.
• Industrial Grade Design: IP30 rated aluminum case for protection against dust and harsh conditions.
• پراخه عملیاتي تودوخه: Operates reliably in extreme temperatures from -40°C to 75°C (-40°F to 167°F).
• SNMP Management: Supports Simple Network Management Protocol for remote monitoring and management.
• DIN-Rail and Wall-Mountable: Flexible installation options for various industrial environments.
• بې ځایه بریښنا ان پټ: Features dual DC power inputs for enhanced reliability.
• لوړ فعالیت: Non-blocking wire-speed forwarding for optimal data throughput.

3. د تنظیم کولو لارښود

3.1 د بسته محتويات

د نصبولو دمخه، مهرباني وکړئ تصدیق کړئ چې ستاسو کڅوړه لاندې توکي لري:

• IGS-801M Industrial SNMP Switch
• د چټک نصبولو لارښود
• د DIN- ریل نصب کټ
• Terminal block connector for power input

3.2 فزیکي نصب کول

The IGS-801M can be installed on a standard DIN-rail or mounted on a wall. Ensure the installation location is well-ventilated and within the specified operating temperature range.

1. د DIN-ریل نصب کول: Attach the DIN-rail clip to the rear of the switch. Hook the top of the clip onto the DIN-rail and push the bottom until it snaps into place.
2. دیوال نصبول: Use the provided wall-mount brackets (if applicable) and screws to secure the switch to a flat surface. Ensure adequate clearance for cabling and ventilation.

شکل ۳: زاویه لرونکی view of the IGS-801M, showing the Ethernet ports and the removable terminal block for power input at the top.

3.3 د بریښنا نښلول

The IGS-801M supports redundant DC power inputs. Connect your power source(s) to the terminal block connector located on the top of the switch. Ensure correct polarity (V+ to positive, V- to negative, and Ground to ground). The input voltage range is typically 12-48V DC, but refer to the product label for exact specifications.

• Connect the power wires to the appropriate terminals on the removable terminal block.
• Insert the terminal block into the power input slot on the switch.
• Once power is supplied, the P1 and/or P2 LEDs on the front panel should illuminate.

د شبکې اتصال

Connect your network devices (e.g., computers, servers, other switches) to the RJ45 Ethernet ports on the front panel using standard Cat5e/6 Ethernet cables. The switch supports auto MDI/MDI-X, so straight-through or crossover cables can be used interchangeably.

• Insert one end of the Ethernet cable into an available port on the IGS-801M.
• Connect the other end of the cable to your network device.
• The corresponding LNK/ACT LED for that port will illuminate when a valid link is established and blink to indicate activity.

4. عملیات

4.1 د LED شاخصونه

The front panel of the IGS-801M features several LED indicators to provide status information:

• P1 / P2 (Green): Indicates power status for power input 1 and 2. Lit when power is supplied.
• فالټ (سور): Indicates a system fault or power failure. Lit when an issue is detected.
• LNK/ACT (Green for each port):
  • کلک شنه: A valid network link is established.
  • شین څراغ: Data activity is occurring on the port.
• 1000 (Green for each port): Indicates Gigabit (1000Mbps) connection speed.
• 100 (Green for each port): Indicates Fast Ethernet (100Mbps) connection speed.

۵.۱ د شبکې بنسټیز ترتیب

The IGS-801M is a managed switch, supporting SNMP for advanced network management. For initial setup and basic configuration, you may need to connect to the switch via its web-based interface or console port (if available). Refer to the full user manual or the Quick Installation Guide for detailed instructions on accessing and configuring the switch's management features, including IP address assignment, VLANs, QoS, and security settings.

By default, the switch may obtain an IP address via DHCP or have a static default IP address. Consult the product documentation for the default IP and login credentials.

5. ساتنه

Regular maintenance helps ensure the longevity and optimal performance of your IGS-801M switch.

• پاکول: د سویچ بهرنۍ برخه په دوره یي ډول د نرم او وچ ټوکر سره پاکه کړئ. د مایع یا ایروسول پاکوونکو څخه کار مه اخلئ. ډاډ ترلاسه کړئ چې د هوا د توییدو دروازې د دوړو او کثافاتو څخه پاکې دي.
• د فرم ویئر تازه معلومات: د سیارې ټیکنالوژي وګورئ website regularly for firmware updates. Keeping the firmware up-to-date can improve performance, add new features, and address security vulnerabilities.
• د چاپیریال څارنه: ډاډ ترلاسه کړئ چې عملیاتي چاپیریال د زیان مخنیوي لپاره د ټاکل شوي تودوخې او رطوبت حدودو کې پاتې کیږي.
• د کیبل مدیریت: Ensure all network and power cables are securely connected and properly routed to prevent accidental disconnections or damage.

6. ستونزه حل کول

This section provides solutions to common issues you might encounter with the IGS-801M switch.

7. تخنیکي مشخصات

8. تضمین او ملاتړ

For detailed warranty information, please refer to the warranty card included with your product or visit the official Planet Technology webسایټ. د تضمین شرایط او مقررات ممکن د سیمې او محصول له مخې توپیر ولري.

For technical support, product inquiries, or service requests, please contact Planet Technology's customer support. You can typically find contact information on their official webسایټ یا د محصول بشپړ اسنادو کې.

Note: This manual provides general guidance. For comprehensive details and advanced configurations, please refer to the complete user manual available on the manufacturer's webسایټ