د کالیبر BC108US فعال لاندې سیټ موټر سب ووفر سیسټم کارونکي لارښود

1. پیژندنه

د پیرودلو لپاره مننهasing the Caliber BC108US 8-Inch Enclosed Active Underseat Car Stereo Subwoofer System. This manual provides essential information for the proper installation, operation, and maintenance of your new subwoofer. Please read this manual thoroughly before attempting installation or operation to ensure optimal performance and safety.

The Caliber BC108US is designed to deliver powerful bass in a compact form factor, ideal for underseat installation in vehicles. It features a maximum power output of 500W and an RMS output of 100W at 4Ω, with RCA inputs, input level control, and built-in protection circuits.

2. د خوندیتوب معلومات

Always observe the following safety precautions to prevent injury or damage to the unit and your vehicle:

• د مسلکي نصب کولو وړاندیز شوی: Installation of car audio equipment can be complex and may require specialized tools and knowledge. If you are unsure about any part of the installation process, consult a qualified car audio technician.
• د بیټرۍ قطع کول: Before starting any wiring, disconnect the vehicle's negative battery terminal to prevent electrical shorts and damage.
• مناسب تارونه: Ensure all wiring is correctly connected according to the diagrams in this manual. Incorrect wiring can cause damage to the subwoofer, vehicle's electrical system, or fire.
• د فیوز ساتنه: Always use the correct fuse rating for the power connection to protect the unit and the vehicle's electrical system.
• وینټیلیشن: Ensure adequate ventilation around the subwoofer. Do not block any vents. The unit can generate heat during operation.
• د رطوبت څخه ډډه وکړئ: This unit is not waterproof. Do not expose it to water or excessive moisture.
• خوندي نصب کول: Mount the subwoofer securely to prevent it from moving during vehicle operation, which could cause injury or damage.
• د حجم کچه: د لوړ غږ کچې سره اوږد مهاله تماس کولی شي د اوریدلو زیان ورسوي. غږ آرامۍ کچې ته تنظیم کړئ.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

• Caliber BC108US Active Underseat Subwoofer
• وائرډ ریموټ کنټرول
• Power/High-Level Input Wiring Harness
• د کارونکي لارښود (دا لاسوند)

4. محصول ختم شوview

The Caliber BC108US is a compact, active subwoofer designed for discreet installation, typically under a car seat. Its robust die-cast enclosure houses an 8-inch subwoofer and an integrated ampلايف

شکل 4.1: پورته view of the Caliber BC108US active underseat subwoofer, showcasing its compact design and the "500 watts" power rating printed on the enclosure.

شکل 4.2: اړخ view of the Caliber BC108US, highlighting its slim profile suitable for underseat installation.

شکل 4.3: پورته view of the Caliber BC108US, showing the integrated mounting brackets for secure installation.

Figure 4.4: Rear panel of the Caliber BC108US, displaying the various controls and input connections including RCA, remote, phase, frequency, and gain adjustments.

4.5 شکل: تړل view of the power, ground, and remote turn-on wires, showing their respective terminals for connection.

شکل 4.6: مفصل view of the multi-pin power connector that connects to the subwoofer unit, facilitating power and high-level input connections.

Figure 4.7: Diagram illustrating the physical dimensions of the Caliber BC108US subwoofer: 35cm (width), 23.5cm (depth), and 7cm (height).

5. ترتیب او نصب کول

ستاسو د فرعي ووفر د فعالیت او اوږد عمر لپاره مناسب نصب کول خورا مهم دي. دا ډیره سپارښتنه کیږي چې دا واحد د مسلکي موټر آډیو تخنیکین لخوا نصب شي.

۳.۱. د نصبولو ځای غوره کول

The Caliber BC108US is designed for underseat mounting due to its compact dimensions. Consider the following when selecting a location:

• تصفیه: Ensure there is sufficient space for the unit (35cm W x 23.5cm D x 7cm H) and adequate airflow around it.
• امنیت: The mounting surface must be sturdy enough to securely hold the subwoofer and prevent movement during driving.
• لاسرسی: While not frequently accessed, consider the ease of connecting wires and adjusting controls if needed.
• د کیبل لاره: Plan the routing of power, ground, remote, and audio cables to avoid interference and ensure a neat installation.

5.2. د تارونو نښلول

د هر ډول نښلولو دمخه، د خپل موټر د بیټرۍ منفي ټرمینل جلا کړئ.

1. د بریښنا اتصال (B+): Connect the yellow wire from the wiring harness to the positive (+) terminal of your vehicle's battery. Use an appropriate gauge wire and install an inline fuse (not supplied) as close to the battery as possible. The fuse rating should be suitable for a 500W peak power ampلايف
2. ځمکنۍ اړیکه (GND): Connect the black wire from the wiring harness to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection by scraping away any paint or rust.
3. ریموټ چالان (REM): Connect the blue wire from the wiring harness to the remote turn-on output of your car stereo. This wire tells the subwoofer to turn on when your stereo is active. If your stereo does not have a remote output, you may connect it to an ignition-switched 12V source, but this may result in a slight turn-on pop.
4. د آډیو ان پټ (RCA یا لوړ پوړ):
   • RCA ننوت: If your car stereo has RCA pre-outs, connect them to the CH1 and CH2 RCA inputs on the subwoofer's rear panel.
   • د لوړې کچې داخلول: If your car stereo does not have RCA pre-outs, use the high-level input wires on the supplied harness. Connect the speaker output wires from your car stereo directly to the corresponding high-level input wires on the subwoofer harness. Ensure correct polarity (+ to + and - to -).
5. د ریموټ کچه کنټرول: Connect the wired remote control to the "REMOTE" port on the subwoofer's rear panel. Route the cable to a convenient location for the driver to adjust bass levels.

Once all connections are made, re-connect the negative terminal of your vehicle's battery.

6. عملیاتي لارښوونې

After successful installation, you can power on your car stereo to activate the subwoofer. Adjust the settings on the subwoofer's rear panel for optimal sound performance.

6.1. Controls and Adjustments

Refer to Figure 4.4 for the location of these controls:

• GAIN (Input Level Control): This knob adjusts the input sensitivity of the subwoofer. Start with the gain set to minimum (MIN). Play music through your car stereo and slowly increase the gain until you hear distortion, then back off slightly. This matches the subwoofer's input to your stereo's output level.
• FREQ (د ټیټ پاس فلټر): This knob adjusts the crossover frequency from 50Hz to 160Hz. The subwoofer will only play frequencies below the set point. Adjust this to blend the subwoofer's output seamlessly with your main car speakers. A common starting point is around 80-100Hz.
• PHASE (Phase Switch): This switch allows you to select between 0° and 180° phase. Adjust this switch while listening to music to determine which setting provides the most impactful and cohesive bass response with your main speakers.
• یادونه: Port for connecting the wired remote level control.
• د بریښنا څراغونه: Illuminates green when the subwoofer is powered on.
• د LED ساتنه: Illuminates red if the subwoofer enters protection mode due to overheating, short circuit, or other issues.

6.2. Using the Wired Remote Control

The wired remote control allows you to conveniently adjust the bass level from the driver's seat without accessing the subwoofer unit directly. Rotate the knob to increase or decrease the subwoofer's output level.

7. ساتنه

The Caliber BC108US is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:

• پاکول: Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• وینټیلیشن: Periodically check that the area around the subwoofer is clear of obstructions to ensure proper airflow and prevent overheating.
• اړیکې: Occasionally inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
• د چاپیریال عوامل: د واحد د سختې تودوخې، د اوږدې مودې لپاره د مستقیم لمر وړانګو، یا ډیر رطوبت سره د مخ کیدو څخه ډډه وکړئ.

8. ستونزه حل کول

If you experience issues with your Caliber BC108US subwoofer, refer to the following table for common problems and their solutions:

If the problem persists after trying these solutions, please contact Caliber customer support or a qualified technician.

9. مشخصات

10. د تضمین معلومات

The Caliber BC108US comes with a limited warranty. Please refer to the warranty card included in your product packaging or visit the official Caliber website for detailed terms and conditions regarding warranty coverage, duration, and claims procedures. Keep your proof of purchase for warranty service.

11. د پیرودونکي ملاتړ

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Caliber customer support. Contact information can typically be found on the official Caliber webپه سایټ یا د محصول په بسته بندۍ کې.

Webسایټ: www.calibereurope.com (یادونه: دا یو ځای ساتونکی دی URL، مهرباني وکړئ د اصلي ملاتړ اړیکو توضیحاتو لپاره د محصول رسمي اسنادو ته مراجعه وکړئ.)