لیګرانډ DX3 کوچنی سرکټ ماتونکی (prot.dx3 صنعت) 1-قطب 6A لارښوونې لارښود

1. پیژندنه

This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of your Legrand DX3 Miniature Circuit Breaker. This device is designed to protect electrical circuits from overcurrents, which can result from overload or short circuit. Please read this manual thoroughly before installation or use and retain it for future reference.

2. د خوندیتوب معلومات

خبرداری: Electrical work should only be performed by qualified and licensed professionals. Failure to follow these instructions can result in electric shock, fire, serious injury, or death.

• د سرکټ بریکر نصبولو یا خدمت کولو دمخه تل د اصلي خدماتو پینل کې بریښنا قطع کړئ.
• تایید کړئ چې والیtage and current ratings of the circuit breaker match the requirements of your electrical system.
• که چیرې د سرکټ بریکر خراب ښکاري نو مه یې کاروئ.
• Ensure all connections are tight and secure to prevent overheating.
• د ټولو محلي او ملي بریښنا کوډونو او مقرراتو اطاعت وکړئ.

3. محصول ختم شوview

The Legrand DX3 Miniature Circuit Breaker is a single-pole thermal-magnetic device designed for DIN rail mounting. It provides protection against both overloads and short circuits in residential, commercial, and industrial applications. The 'C' curve indicates its tripping characteristics, suitable for general purpose applications with moderate inrush currents.

انځور 1: مخکی view of the Legrand DX3 Miniature Circuit Breaker. This image displays the main body of the circuit breaker, including the toggle switch for operation, the 'DX3 C6' rating label, and the Legrand brand logo. The top and bottom terminals for wire connections are also visible.

کلیدي ځانګړتیاوې:

• Curve C: Provides thermal-magnetic protection suitable for general applications.
• اوسنی درجه بندي: 6 Amperes
• د پولو شمېر: 1.
• د نصب کولو ډول: DIN Rail Mount.
• د ماتولو ظرفیت: 10/16kA (kilioamperes).

4. ترتیب او نصب کول

Installation must be performed by a qualified electrician in accordance with all applicable electrical codes.

1. د بریښنا قطع کول: Ensure the main power supply to the electrical panel is completely disconnected and locked out before beginning any work. Verify with a voltage ټیسټر.
2. پورته کول: Clip the circuit breaker onto the DIN rail in the electrical panel. Ensure it is securely seated.
3. Wiring - Line Connection: Connect the incoming phase (line) wire to the top terminal of the circuit breaker. Strip the wire insulation to the recommended length (typically 10-12mm), insert it fully into the terminal, and tighten the screw firmly.
4. Wiring - Load Connection: Connect the outgoing phase (load) wire to the bottom terminal of the circuit breaker. Strip the wire insulation, insert it fully, and tighten the screw firmly.
5. تایید: ټول اتصالونه د ټینګښت او سم قطبیت لپاره دوه ځله وګورئ. ډاډ ترلاسه کړئ چې هیڅ خلاص تارونه ښکاره شوي نه دي.
6. د پینل تړل: Close the electrical panel cover securely.
7. د بریښنا بیا رغونه: د خدماتو اصلي پینل ته بریښنا بیرته ورکړئ.

5. عملیاتي لارښوونې

The Legrand DX3 circuit breaker features a simple toggle switch for operation.

• د فعالولو لپاره: Push the toggle switch upwards to the 'ON' position.
• د بندولو لپاره: Push the toggle switch downwards to the 'OFF' position.
• Tripped State: If an overload or short circuit occurs, the circuit breaker will automatically trip, moving the toggle switch to an intermediate or 'TRIPPED' position (often indicated by a red marker).
• د ټریپ شوي بریکر بیا تنظیم کول: To reset a tripped breaker, first move the toggle switch fully to the 'OFF' position, then push it upwards to the 'ON' position. If the breaker immediately trips again, do not attempt to reset it repeatedly. Investigate the cause of the trip.

6. ساتنه

The Legrand DX3 Miniature Circuit Breaker requires minimal maintenance. Regular inspections are recommended to ensure proper function.

• دوره ای بصری معاینه: Annually, or as required by local codes, visually inspect the circuit breaker for any signs of damage, discoloration, or loose connections.
• پاکول: If necessary, gently clean the exterior of the circuit breaker with a dry, soft cloth. Do not use liquids or abrasive cleaners.
• ازموینه: While not typically required for residential circuit breakers, some industrial applications may require periodic functional testing. Consult relevant standards or a qualified electrician.

7. ستونزه حل کول

If your circuit breaker is not functioning as expected, consider the following:

• Breaker Trips Immediately After Reset: This indicates a persistent fault, likely a short circuit or severe overload. Immediately disconnect all loads from the circuit and consult a qualified electrician to identify and rectify the fault.
• Breaker Trips Intermittently: This could be due to an intermittent short circuit, an overloaded circuit (too many devices drawing power), or a faulty appliance. Try reducing the load on the circuit or isolating faulty appliances.
• Breaker Does Not Trip During a Fault: This is a serious safety concern. If you suspect the breaker is not providing protection, immediately disconnect power to the circuit and have the breaker inspected and replaced by a qualified electrician.
• ډیر ګرمول: If the breaker or surrounding area feels hot, it could indicate loose connections, an overloaded circuit, or an internal fault. Disconnect power and seek professional assistance.

8. مشخصات

9. تضمین او ملاتړ

For specific warranty information and technical support, please refer to the official Legrand website or contact Legrand customer service directly. Keep your purchase receipt as proof of purchase.