NEC NP-V260 DLP Projector Instruction Manual

1. پیژندنه

This manual provides essential information for the safe and efficient operation of your NEC NP-V260 DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference. This projector is designed for presenting high-definition content with 2600 ANSI lumens brightness.

2. ترتیب کول

۲.۱ د بسته بندۍ او محتوا خلاصول

Carefully remove the projector and all accessories from the packaging. Verify that all components are present:

• NEC NP-V260 DLP Projector
• د بریښنا تار
• ریموټ کنټرول (که شامل وي)
• د کارونکي لارښود (دا لاسوند)

۴.۱ د پروجیکټر ځای پرځای کول

Place the projector on a stable, level surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. Maintain a suitable distance from the screen for the desired image size.

2.3 د نښلولو بریښنا

1. د بریښنا تار د پروجیکټر د AC انلیټ سره وصل کړئ.
2. د برښنا تار بله پای په یو ځمکني بریښنایی پلورنځي کې ولګوه.

۱.۳ د ننوتلو سرچینو نښلول

The NEC NP-V260 supports various input sources. Connect your device to the appropriate port:

• HDMI: د لوړ تعریف ډیجیټل ویډیو او آډیو لپاره.
• USB: For connecting USB devices or for firmware updates.
• Network (Wired & Wireless): For network control and content streaming, if supported by your model.

2.5 ابتدايي پاور آن

Press the power button on the projector or remote control to turn on the unit. The power indicator light will change color, and the projector lamp روښانه کړي.

2.6 Focus and Zoom Adjustment

This image displays the top panel of the NEC NP-V260 projector. Visible features include the focus and zoom rings on the lens, the NEC logo, a warning label for lamp type NP18LP, and the control panel with menu navigation buttons, source selection, and power button.

Adjust the focus ring around the lens until the projected image is sharp and clear. Use the zoom ring to adjust the image size to fit your screen.

3. عملیاتي لارښوونې

3.1 بنسټیز کنټرولونه

The projector features an on-board control panel. The main controls include:

• د بریښنا تڼۍ: پروجیکټر چالان یا بند کړئ.
• سرچینه تtonۍ: Cycles through available input sources (HDMI, USB, Network).
• د مینو تڼۍ: د پردې پرده ښودنې (OSD) مینو ته لاسرسی لري.
• د نیویګیشن تڼۍ (پورته/ښکته/کیڼ/ښي): Used to navigate through OSD menus.
• تڼۍ داخل کړئ: Confirms selections in the OSD menu.
• د وتلو تtonۍ: Exits the current OSD menu or returns to the previous level.

3.2 Navigating the On-Screen Display (OSD)

فشار ورکړئ مینو button to open the OSD. Use the navigation buttons to highlight options and the ننوتل button to select. Adjust settings such as picture mode, aspect ratio, and keystone correction.

3.3 Adjusting Picture Settings

Within the OSD, navigate to the 'Picture' or 'Image' menu to adjust:

• روښانتیا: Controls the overall lightness or darkness of the image.
• برعکس: Adjusts the difference between the lightest and darkest parts of the image.
• رنګ: Modifies the intensity of colors.
• رنګ: Adjusts the balance between red and green colors (NTSC only).
• تیزوالی: Enhances or softens image edges.
• د اړخ نسبت: Selects the display format (e.g., 4:3, 16:9, Auto).

3.4 Shutting Down the Projector

Press the power button twice (or as indicated by the on-screen prompt) to safely shut down the projector. Allow the projector to cool down completely before unplugging or moving it.

4. ساتنه

۴.۱ د لینز پاکول

د پروجیکټر لینز په نرمۍ سره د نرم، لینټ نه پاک ټوکر سره پاک کړئ چې په ځانګړي ډول د نظري سطحو لپاره ډیزاین شوی. د کثافاتو پاکونکو یا ډیر ځواک څخه کار مه اخلئ.

4.2 د هوا فلټر پاکول

Regularly clean the air filter to ensure proper ventilation and prevent overheating. Refer to the projector's specific instructions for filter removal and cleaning. A clogged filter can significantly reduce lamp د پروجیکټر ژوند او فعالیت.

۴ لamp بدلول

پروجکټور lamp (Type: NP18LP) has a finite lifespan. When the lamp indicator light illuminates or the image becomes dim, it is time to replace the lamp. Always use genuine NEC replacement lamps. Refer to the detailed lamp replacement procedure in the full user manual for safety precautions and steps.

4.4 ذخیره کول

When not in use for extended periods, store the projector in a cool, dry place, protected from dust and extreme temperatures. Use the original packaging or a protective case if available.

5. ستونزه حل کول

که تاسو د خپل پروجیکټر سره ستونزې سره مخ شئ، نو د ستونزو د حل لپاره لاندې عام ګامونه وګورئ:

• نه انځور: Ensure the power cord is securely connected, the projector is turned on, and the correct input source is selected. Check the connection cable between the projector and the source device.
• خړ انځور: Adjust the focus ring on the lens. Ensure the projector is placed at an appropriate distance from the screen.
• غږ نشته: Verify that the audio cable is connected (if using an analog input), the volume is turned up on both the projector and the source device, and the correct audio input is selected. HDMI connections typically carry audio automatically.
• د پروجیکټر ډیر ګرمیدل: Ensure air vents are not blocked. Clean the air filter. Operate the projector in a well-ventilated area.
• Lamp د شاخص رڼا: دا د l په ګوته کويamp is nearing its end of life or has failed. Replace the lamp (Type: NP18LP).

For more complex issues, contact NEC customer support or a qualified service technician.

6. مشخصات

7. تضمین او ملاتړ

7.1 د تضمین معلومات

The NEC NP-V260 DLP Projector is covered by a limited warranty. Please refer to the warranty card included with your product or visit the official NEC webد تفصيلي شرایطو او مقرراتو لپاره سایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

7.2 د پیرودونکي ملاتړ

For technical assistance, service, or further inquiries, please contact NEC customer support. You can find contact information and support resources on the official NEC Display Solutions webسایټ: www.necdisplay.com/support