دستورالعملونه+

Amped Wireless BTSA1

Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter Instruction Manual

Model: BTSA1

1. پیژندنه

د Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter allows you to wirelessly stream audio from any Bluetooth-enabled device to your speaker system. This manual provides instructions for setting up, operating, and maintaining your device.

Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter, front view د انتن سره

انځور 1.1: مخکی view د Amped Wireless BTSA1 adapter with its antenna.

کلیدي ځانګړتیاوې

2. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

3. ترتیب کول

Follow these steps to connect your Amped Wireless BTSA1 adapter to your speaker system and pair your device.

۲.۲ د اډاپټر نښلول

  1. بریښنا وصل کړئ: Plug the provided power adapter into the "PWR" port on the back of the BTSA1 adapter and then into a wall outlet.
  2. Connect to Speaker System:
    • For RCA input: Use the included 3.5mm to RCA cable. Connect the RCA ends to the "AUDIO OUT" ports (red and white) on the back of the adapter and the 3.5mm end to your speaker system's auxiliary input.
    • For 3.5mm input: Use a standard 3.5mm audio cable (not included). Connect one end to the "LINE OUT" port on the back of the adapter and the other end to your speaker system's 3.5mm auxiliary input.
شاته view of Amped Wireless BTSA1 showing power, audio out, line out, and antenna ports

Image 3.1: Rear panel connections of the BTSA1 adapter, including power, audio outputs, and antenna port.

اړخ view of Amped Wireless BTSA1 showing antenna and rear ports

انځور ۵.۱: اړخ view illustrating the antenna connection and rear ports.

۵.۱ د بلوتوث وسیله جوړه کول

  1. Ensure the BTSA1 adapter is powered on. The "Connect" button on the front will illuminate.
  2. On your Bluetooth-enabled device (smartphone, tablet, laptop), navigate to its Bluetooth settings.
  3. بلوتوټ فعال کړئ او د شته وسایلو لټون وکړئ.
  4. غوره کړئ "Amped Wireless BTSA1" from the list of found devices.
  5. Once connected, the indicator light on the adapter will change to confirm successful pairing.
مخکی view of Amped Wireless BTSA1 with the connect button

انځور 3.3: مخکی view of the BTSA1 adapter, highlighting the 'Connect' button.

۳. د اډاپټر چلول

After successful pairing, you can begin streaming audio.

  1. Ensure your speaker system is turned on and set to the correct input source (AUX, RCA, etc.) where the BTSA1 is connected.
  2. Play audio from your Bluetooth-enabled device. The sound will now be transmitted wirelessly to your speaker system.
  3. Adjust volume using your Bluetooth device or your speaker system's controls.

یادونه: Only one device can be actively connected to the BTSA1 adapter at a time. To connect a different device, disconnect the currently paired device from its Bluetooth settings, then initiate pairing from the new device.

5. ساتنه

د Amped Wireless BTSA1 adapter requires minimal maintenance.

6. ستونزه حل کول

که تاسو د خپلو ستونزو سره مخ شئ Amped Wireless BTSA1 adapter, refer to the following common solutions:

ستونزهد حل لاره
هیڅ غږیز محصول نشته.
  • Ensure the adapter is powered on and the indicator light is active.
  • Verify that the audio cables are securely connected to both the adapter and your speaker system.
  • Check that your speaker system is set to the correct input source (e.g., AUX, RCA).
  • Confirm that your Bluetooth device is successfully paired and playing audio.
  • Adjust the volume on both your Bluetooth device and your speaker system.
د بلوتوث وسیله نشي جوړه کیدی.
  • Ensure the adapter is in pairing mode (indicator light blinking). If not, press the "Connect" button.
  • Make sure Bluetooth is enabled on your device and it is within range of the adapter.
  • Disconnect any other devices currently paired with the BTSA1.
  • Restart both your Bluetooth device and the BTSA1 adapter.
Poor sound quality or frequent disconnections.
  • Move your Bluetooth device closer to the adapter to improve signal strength.
  • Ensure there are no major obstructions (thick walls, large metal objects) between your device and the adapter.
  • Minimize interference from other wireless devices (Wi-Fi routers, cordless phones).
  • Test with a different audio source or Bluetooth device to isolate the problem.

7. مشخصات

فیچرتفصیل
د ماډل شمیرهBTSA1
د ارتباط ټیکنالوژيبلوتوث، RCA
د نښلونکي ډول3.5mm جیک، RCA
د محصول ابعاد (LxWxH)1 x 4 x 2.8 انچه
د توکي وزن3.84 اونس
د بریښنا سرچینهد بریښنا تار شوی

۱۱. د محصول ویډیو پای ته ورسیدهview

ویډیو ۳.۱: یو اوورview د Amped Wireless BTSA1 Long Range Bluetooth Speaker Adapter, demonstrating its features and ease of use. This video illustrates how the adapter enables wireless audio streaming to your speaker system from various Bluetooth-enabled devices, highlighting its extended range and simple setup process.

9. تضمین او ملاتړ

د تضمین معلوماتو او تخنیکي ملاتړ لپاره، مهرباني وکړئ رسمي ته مراجعه وکړئ Amped بېسیم website or the contact details provided in the Quick Install Guide included with your product.